Find Research outputs

Search results

• Periprosthetic bone response to axial loading following TKR: Effect of polyethylene thickness and implant material – a finite element analysis study

  Baliga, R., Rao, S. K., Pai, R., Shenoy, S. B., Hegde, A. K., Swaroop, S. & Shetkar, A., 16-10-2019, In: Multidiscipline Modeling in Materials and Structures.

  Research output: Contribution to journal › Article › peer-review

  • Implant
  • Bone
  • Polyethylene
  • Polyethylenes
  • Finite Element

• Potential of Natural Fibers in Composites for Ballistic Applications–A Review

  Nayak, S. Y., Sultan, M. T. H., Shenoy, S. B., Kini, C. R., Samant, R., Shah, A. U. M. & Amuthakkannan, P., 2020, In: Journal of Natural Fibers. p. 1-11 11 p.

  Research output: Contribution to journal › Review article › peer-review

  • Natural fibers
  • Ballistics
  • Composite materials
  • Armor
  • Synthetic fibers
  11 Citations (Scopus)

• Preface

  Pai, R., Shenoy, S. & Khader, A., 2017, In: Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 217-218 2 p.

  Research output: Contribution to journal › Editorial › peer-review

• Recent developments in turbomachinery component materials and manufacturing challenges for aero engine applications

  Srinivas, G., Raghunandana, K. & Satish Shenoy, B., 01-03-2018, In: IOP Conference Series: Materials Science and Engineering. 314, 1, 012012.

  Research output: Contribution to journal › Conference article › peer-review

  • Turbomachinery
  • Engines
  • Propulsion
  • Turboprop engines
  • Turbojet engines
  4 Citations (Scopus)

• Recent developments of axial flow compressors under transonic flow conditions

  Srinivas, G., Raghunandana, K. & Satish Shenoy, B., 01-01-2017, In: IOP Conference Series: Materials Science and Engineering. 197, 1, 012078.

  Research output: Contribution to journal › Article › peer-review

  • Axial-flow compressors
  • Transonic flow
  • Compressors
  • Turbomachinery
  • Metal foil
  2 Citations (Scopus)

• Review on carbon fiber reinforced polymer (CFRP) and their mechanical performance

  Hegde, S., Satish Shenoy, B. & Chethan, K. N., 01-01-2019, In: Materials Today: Proceedings. 19, p. 658-662 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Carbon Fiber
  • Carbon fibers
  • Polymers
  • Adhesives
  • Silanes
  6 Citations (Scopus)

• Review on unconventional wind energy

  Gulabani, G., Karim, B. S. A., Radhakrishnan, J., Satish Shenoy, B. & Zuber, M., 2020, In: Journal of Engineering and Technological Sciences. 52, 4, p. 565-583 19 p.

  Research output: Contribution to journal › Review article › peer-review

  Open Access

  • Wind turbines
  • Wind power
  • Fossil fuels
  • Environmental regulations
  • Offshore wind turbines

• Role of different orthopedic biomaterials on wear of hip joint prosthesis: A review

  Chethan, K. N., Satish Shenoy, B. & Shyamasunder Bhat, N., 01-01-2018, In: Materials Today: Proceedings. 5, 10, p. 20827-20836 10 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Joint prostheses
  • Biomaterials
  • Orthopedics
  • Biocompatible Materials
  • Wear of materials
  8 Citations (Scopus)

• Selected peer-reviewed articles from the first international conference on healthcare and technical research (ICHTR 2015), Manipal, India, 22–24 december, 2015

  Udupa, N., Shenoy, B. S., Radhakrishnan, R., Janodia, M. D., Chaudhary, S., Devkar, R. A., Jain, P. & Menon, S., 01-03-2017, In: Advanced Science Letters. 23, 3, p. 1714-1717 4 p.

  Research output: Contribution to journal › Comment/debate › peer-review

• Stability characteristics of a tri-taper journal bearing: A linearized perturbation approach

  Pai, R., Rao, D. S., Shenoy, B. S. & Pai, R. S., 2012, In: Journal of Materials Research and Technology. 1, 2, p. 84-90 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Journal bearings
  • Reynolds equation
  • Finite difference method
  • Linearization
  • Boundary conditions
  1 Citation (Scopus)

• Stability of water lubricated bearing using linear perturbation method under turbulent conditions

  Mallya, R., Shenoy, B. S., Pai, R. S. & Pai, R. S., 01-07-2017, In: Pertanika Journal of Science and Technology. 25, 3, p. 995-1008 14 p.

  Research output: Contribution to journal › Article › peer-review

  • Reynolds number
  • whirl
  • perturbation
  • eccentricity
  • damping
  1 Citation (Scopus)

• Static characteristics of misaligned multiple axial groove water-lubricated bearing in the turbulent regime

  Mallya, R., Shenoy, S. B. & Pai, R., 01-03-2017, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 231, 3, p. 385-398 14 p.

  Research output: Contribution to journal › Article › peer-review

  • static characteristics
  • Journal bearings
  • grooves
  • journal bearings
  • Friction
  18 Citations (Scopus)

• Static structural analysis of different stem designs used in total hip arthroplasty using finite element method

  K.N., C., Zuber, M., Bhat N., S., Shenoy B., S. & R. Kini, C., 01-06-2019, In: Heliyon. 5, 6, e01767.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Arthroplasty
  • Structural analysis
  • Cobalt alloys
  • Chromium alloys
  • Finite element method
  7 Citations (Scopus)

• Steady state characteristics of misaligned multiple axial groove water-lubricated journal bearing

  Mallya, R., Shenoy, S. B. & Pai, R., 03-06-2015, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 229, 6, p. 712-722 11 p.

  Research output: Contribution to journal › Article › peer-review

  • journal bearings
  • Journal bearings
  • grooves
  • misalignment
  • Friction
  28 Citations (Scopus)

• Three dimensional assessment of protraction in craniofacial structures of cleft lip and palate model using Facemask and Maxgym

  Parveen, S., Husain, A., Shenoy, S., Mascarenhas, R., Gosla Reddy, S. & Reddy, M., 01-01-2019, In: Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 553-561 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Three-dimensional
  • Model
  • Computerized tomography
  • Vertex of a graph
  • Large Displacements

• Three-dimensional assessment of transverse displacement with Facemask and Maxgym in unilateral cleft lip and palate model

  Parveen, S., Husain, A., Reddy, S. G., Mascarenhas, R., Shenoy, S. & Reddy, M., 01-04-2019, In: Journal of Indian Society of Pedodontics and Preventive Dentistry. 37, 2, p. 177-184 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Palatal Expansion Technique
  • Cleft Lip
  • Cleft Palate
  • Crowns
  • Bicuspid

• Three-dimensional finite element analysis of initial displacement and stress on the craniofacial structures of unilateral cleft lip and palate model during protraction therapy with variable forces and directions

  Parveen, S., Husain, A., Gosla Reddy, S., Mascarenhas, R. & Shenoy, S., 2020, (Accepted/In press) In: Computer Methods in Biomechanics and Biomedical Engineering.

  Research output: Contribution to journal › Article › peer-review

  • Arches
  • Direction compound
  • Finite element method

• Three dimensional finite element stress analysis of two and four implant supported prosthesis

  Hegde, P., Dhanasekar, B., Shenoy, S., Aparna, I. N., Gupta, L., Umesh, Y. & Mahesh, M., 01-11-2018, In: Indian Journal of Public Health Research and Development. 9, 11, p. 126-131 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Overlay Denture
  • Finite Element Analysis
  • Prostheses and Implants
  • Denture Design
  • Mouth
  2 Citations (Scopus)

• Wear behaviour studies on Grewia Serrulata bast fibre reinforced polymer composites

  Mahesha, G. T., Satish Shenoy, B., Vijaya Kini, M. & Padmaraj, N. H., 01-01-2018, In: Cogent Engineering. 5, 1, p. 1-8 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Bast fibers
  • Polymers
  • Wear of materials
  • Fibers
  • Composite materials
  3 Citations (Scopus)

• Wear estimation of trapezoidal and circular shaped hip implants along with varying taper trunnion radiuses using finite element method

  K N, C., Ogulcan, G., Bhat N, S., Zuber, M. & Shenoy B, S., 11-2020, In: Computer Methods and Programs in Biomedicine. 196, 105597.

  Research output: Contribution to journal › Article › peer-review

  • Hip
  • Wear of materials
  • Joints
  • Finite element method
  • Thigh