Find Research outputs

Search results

• A 3 dimensional assessment of the depth of tumor invasion in microinvasive tongue squamous cell carcinoma - A case series analysis

  Amit-Byatnal, A., Natarajan, J., Shenoy, S., Kamath, A., Hunter, K. & Rad-Hakrishnan, R., 01-11-2015, In: Medicina Oral, Patologia Oral y Cirugia Bucal. 20, 6, p. e645-e650

  Research output: Contribution to journal › Article › peer-review

  • Tongue
  • Squamous Cell Carcinoma
  • Neoplasms
  • Nonparametric Statistics
  • Recurrence
  3 Citations (Scopus)

• A Comparative Evaluation of Stress Distribution with Two Attachment Systems of Varying Heights in a Mandibular Implant-Supported Overdenture: A Three-Dimensional Finite Element Analysis

  Khurana, N., Rodrigues, S., Shenoy, S., Saldanha, S., Pai, U., Shetty, T., Srikant, N., Mahesh, M. & Hegde, P., 01-01-2019, In: Journal of Prosthodontics.

  Research output: Contribution to journal › Article › peer-review

  • Overlay Denture
  • Finite Element Analysis
  • Cortical Bone
  • Cancellous Bone
  • Mandible
  4 Citations (Scopus)

• A computational conjugate thermal analysis of HP stage turbine blade cooling with innovative cooling passage geometries

  Kini, C. R., Satish, S. B. & Sharma, N. Y., 14-11-2011, Proceedings of the World Congress on Engineering 2011, WCE 2011. p. 2168-2173 6 p. (Proceedings of the World Congress on Engineering 2011, WCE 2011; vol. 3).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Turbine Blade
  • Thermal Analysis
  • Cooling
  • Thermoanalysis
  • Turbomachine blades
  14 Citations (Scopus)

• Application of finite element analysis on balloon expandable coronary stents: A review

  Bekal, C., Yamada, H., Shetty, R. & Shenoy, S., 01-01-2018, In: International Journal of Engineering and Technology(UAE). 7, 3, p. 1640-1647 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Stents
  • Finite Element Analysis
  • Balloons
  • Finite element method
  • Arteries

• A study on the increasing risks(Trauma) related to an ambulance for a paramedic and patient-A review

  Gupta, R., Satish Shenoy, B., Chethan, K. N. & Zuber, M., 01-10-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 791-802 12 p., IJMPERDOCT201970.

  Research output: Contribution to journal › Article › peer-review

  • Ambulances
  • Emergency vehicles
  • Ergonomics
  • Sensors
  • Accelerometers
  1 Citation (Scopus)

• A study to compare the stress patterns in the edentulous mandibular bone around the two implant retained over denture and the prosthesis restored with all-on-four concept using the three dimensional finite element analysis

  Hegde, P., Shenoy, S., Rodrigues, S., Shetty, T., Pai, U., Saldhana, S. & Mahesh, M., 01-01-2020, In: Indian Journal of Forensic Medicine and Toxicology. 14, 1, p. 130-133 4 p.

  Research output: Contribution to journal › Article › peer-review

  • Implant-Supported Dental Prosthesis
  • Overlay Denture
  • Dental prostheses
  • Finite Element Analysis
  • Dentures

• A study to compare the stress patterns in the edenulous mandibalur bone around the two implant retained over denture and the prosthesis restored with all-on-four concept using the three dimensional finite element analysis

  Hegde, P., Shenoy, S., Rodrigues, S., Shetty, T., Pai, U., Saldhana, S. & Mahesh, M., 01-01-2020, In: Indian Journal of Forensic Medicine and Toxicology. 14, 1, p. 149-153 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Implant-Supported Dental Prosthesis
  • Overlay Denture
  • Dental prostheses
  • Finite Element Analysis
  • Dentures

• Axial-flow compressor analysis under distorted phenomena at transonic flow conditions

  Srinivas, G., Raghunandana, K. & Satish, S. B., 01-01-2018, In: Cogent Engineering. 5, 1, p. 1-20 20 p.

  Research output: Contribution to journal › Article › peer-review

  • Axial-flow compressors
  • Transonic flow
  • Compressors
  • Rotors
  • Stream flow

• Biomechanics of hip joint: A systematic review

  Chethan, K. N., Shyamasunder Bhat, N. & Satish Shenoy, B., 01-01-2018, In: International Journal of Engineering and Technology(UAE). 7, 3, p. 1672-1676 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Biomechanics
  • Hip Joint
  • Joint prostheses
  • Biomechanical Phenomena
  • Systematic Reviews
  3 Citations (Scopus)

• Combustion chamber design for efficient heat transfer

  Kasturia, K., Saha, A., Singhal, A., Satish Shenoy, B. & Kini, C. R., 01-01-2019, In: ARPN Journal of Engineering and Applied Sciences. 14, 5, p. 1100-1103 4 p.

  Research output: Contribution to journal › Article › peer-review

  • Combustion chambers
  • Heat transfer
  • Engines
  • Gases
  • Diesel engines

• Comparative evaluation of stress distribution around mandibular overdentures surrounded by three and four implants: A three‐dimensional finite element analysis

  Azwin, A., Hegde, M., Shenoy, V. K., Shenoy, S., Prabhu, B., Upadhya, M. & Rodrigues, S., 01-10-2020, In: Indian Journal of Forensic Medicine and Toxicology. 14, 4, p. 115-121 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Overlay Denture
  • Finite Element Analysis
  • Stress concentration
  • Bone
  • Finite element method

• Comparative evaluation of stress distribution in bone surrounding implant using different implant biomaterials: A 3DFEA study

  Haseeb, S. A., Abdul Khader, S. M., Satish Shenoy, B., Naveen, Y. G., Giridhar Kamath, P. & Vinaya, K. C., 01-01-2019, In: Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 523-532 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Biomaterials
  • Implant
  • Bone
  • Stress Distribution
  • Titanium

• Comparative study of femur bone having different boundary conditions and bone structure using finite element method

  Chethan, K. N., Zuber, M., Bhat, S. N. & Shenoy, S. B., 01-01-2018, In: Open Biomedical Engineering Journal. 12, 1, p. 115-134 20 p.

  Research output: Contribution to journal › Article › peer-review

  • Bone
  • Femur
  • Boundary conditions
  • Finite element method
  • Bone and Bones
  5 Citations (Scopus)

• Comparison of stress patterns in edentulous mandibular bone around two implant retained, four implant retained overdenture and all-on-four concept.-A 3 dimensional finite element analysis

  Hegde, P., Rodrigues, S., Shenoy, S., Shetty, T., Pai, U., Saldhana, S. & Mahesh, M., 01-07-2020, In: Indian Journal of Forensic Medicine and Toxicology. 14, 3, p. 589-595 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Overlay Denture
  • Finite Element Analysis
  • Bone
  • Finite element method
  • Bone and Bones

• Comparison of stress patterns in edentulous mandibular bone around two implant retained, four implant retained overdenture and all-on-four concept - A 3 dimensional finite element analysis

  Hegde, P., Rodrigues, S., Shenoy, S., Shetty, T., Pai, U., Saldhana, S. & Mahesh, M., 01-09-2019, In: Indian Journal of Forensic Medicine and Toxicology. 13, 4, p. 264-269 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Overlay Denture
  • Finite Element Analysis
  • Bone
  • simulation
  • Finite element method

• Comparison of stress patterns in the edentulous mandibular bone around four implant retained over denture and all-on-four concept – A three dimensional finite element analysis

  Hegde, P., Dhanasekar, B., Shenoy, S., Aparna, I. N., Gupta, L., Rodrigues, S. J. & Shetty, T., 01-11-2018, In: Indian Journal of Public Health Research and Development. 9, 11, p. 111-115 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Implant-Supported Dental Prosthesis
  • Finite Element Analysis
  • Dentures
  • Bone and Bones
  • Cortical Bone
  2 Citations (Scopus)

• Corrigendum to “Static structural analysis of different stem designs used in total hip arthroplasty using finite element method” (Heliyon (2019) 5(6), (S2405844019310035), (10.1016/j.heliyon.2019.e01767))

  Chethan, K. N., Zuber, M., Bhat, N. S., Shenoy, B. S. & R. Kini, C., 01-2020, In: Heliyon. 6, 1, e03080.

  Research output: Contribution to journal › Comment/debate › peer-review

  Open Access

  • Arthroplasty
  • Hip

• Development of short areca fiber reinforced biodegradable composite material

  Padmaraj, N. H., Kini, M. V., Pai, B. R. & Shenoy, B. S., 01-01-2013, In: Procedia Engineering. 64, p. 966-972 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Fibers
  • Composite materials
  • Plasticizers
  • Starch
  • Water
  19 Citations (Scopus)

• Dynamic characteristics of a single pad externally adjustable fluid film bearing

  Shenoy, S. & Pai, R., 03-05-2011, In: Industrial Lubrication and Tribology. 63, 3, p. 146-151 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Fluids
  • Film thickness
  • Damping
  • Bearing pads
  • Stiffness
  7 Citations (Scopus)

• Effect of chemical treatments on hardness and toughness properties of Grewia serrulata reinforced polymer composites

  Satish Shenoy, B., Mahesha, G. T., Vijaya Kini, M. & Padmaraj, N. H., 01-01-2019, In: Journal of Mechanical Engineering Research and Developments. 42, 4, p. 228-230 3 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Acetylation
  • Toughness
  • Silanes
  • Hardness
  • Polymers
  2 Citations (Scopus)

• Effect of fiber treatments on mechanical properties of Grewia serrulata bast fiber reinforced polyester composites

  Mahesha, G. T., Shenoy, S. B., Kini, V. M. & Padmaraja, N. H., 01-01-2018, In: Materials Today: Proceedings. 5, 1, p. 138-144 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Bast fibers
  • Polyesters
  • Fibers
  • Mechanical properties
  • Composite materials
  5 Citations (Scopus)

• Effect of helix angle and cross section of helicoidal ducts in gas turbine blade cooling

  Kini, C. R., Purohit, S., Bhagat, K. K. & Shenoy B., S., 01-01-2019, In: International Review of Mechanical Engineering. 13, 2, p. 87-96 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Ducts
  • Turbomachine blades
  • Gas turbines
  • Cooling
  • Thermal load
  1 Citation (Scopus)

• Effect of increased severity in patient specific stenosis of common carotid artery using CFD-a case study

  Khader, S. M. A., Shenoy, B. S., Pai, R., Kamath, S. G., Sharif, N. M. & Rao, V. R. K., 2011, In: World Journal of Modelling and Simulation. 7, 2, p. 113-122 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Stenosis
  • Arteries
  • Computational Fluid Dynamics
  • Shear stress
  • Computational fluid dynamics
  13 Citations (Scopus)

• Effect of nanoparticles additives on the performance of an externally adjustable fluid film bearing

  Shenoy, B. S., Binu, K. G., Pai, R., Rao, D. S. & Pai, R., 01-01-2012, In: Tribology International. 45, 1, p. 38-42 5 p.

  Research output: Contribution to journal › Article › peer-review

  • fluid films
  • application programming interface
  • Nanoparticles
  • Application programming interfaces (API)
  • oils
  49 Citations (Scopus)

• Effect of turbulence and offset loading on the performance of a single pad externally adjustable fluid film bearing

  Satish, S. B., Rammohan, P. B. S., Raghuvir, P. B. & Shrikanth, R. D., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, AND C ed. Vol. 3. p. 977-983 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Reynolds equation
  • Finite difference method
  • Turbulence models
  • Aspect ratio
  • Turbulence

• Effect of turbulence on the static performance of a misaligned externally adjustable fluid film bearing lubricated with couple stress fluids

  Shenoy, B. S. & Pai, R., 11-2011, In: Tribology International. 44, 12, p. 1774-1781 8 p.

  Research output: Contribution to journal › Article › peer-review

  • fluid films
  • Turbulence
  • turbulence
  • lubricants
  • Lubricants
  16 Citations (Scopus)

• Experimental investigation on dynamic and static transverse behaviour of thin woven Carbon/Aramid hybrid laminates

  Andrews Zachariah, S., Satish Shenoy, B., Jayan, J. & Pai, K. D., 2020, (Accepted/In press) In: Journal of King Saud University - Engineering Sciences.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Carbon
  • Laminates
  • Impact strength
  • carbon fiber reinforced plastic
  • Carbon Fiber

• Experimental study of hydrodynamic pressure distribution in oil lubricated two-axial groove journal bearing

  Binu, K. G., Yathish, K., Mallya, R., Shenoy, B. S., Rao, D. S. & Pai, R., 01-01-2015, In: Materials Today: Proceedings. 2, 4-5, p. 3453-3462 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Journal bearings
  • Oils
  • Pressure distribution
  • Hydrodynamics
  • Pressure measurement
  11 Citations (Scopus)

• Effect of posterior tibial slope and implant material on the bone-implant system following TKA: A finite element study

  Baliga B, R., Pai B, R., Shenoy, S., Hegde K, A., Rao K, S., Swaroop, S. & Shetkar, A., 01-01-2018, In: Cogent Engineering. 5, 1, p. 1-10 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Bone
  • Polyethylene
  • Polyethylenes
  • Shielding
  • Metals
  3 Citations (Scopus)

• Finite element analysis of different hip implant designs along with femur under static loading conditions

  Chethan, K. N., Shyamasunder Bhat, N., Zuber, M. & Satish Shenoy, B., 01-10-2019, In: Journal of Biomedical Physics and Engineering. 9, 5, p. 507-516 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Finite Element Analysis
  • Hip Joint
  • Femur
  • Hip
  • Joints
  4 Citations (Scopus)

• FINITE ELEMENT ANALYSIS of URINARY BLADDER WALL THICKNESS at DIFFERENT PRESSURE CONDITION

  Keni, L. G., Kalburgi, S., Hameed, B. M. Z., Zuber, M., Tamagawa, M. & Shenoy, B. S., 01-08-2019, In: Journal of Mechanics in Medicine and Biology. 19, 5, 1950029.

  Research output: Contribution to journal › Article › peer-review

  • Mucous Membrane
  • Pressure gradient
  • Mechanical properties
  1 Citation (Scopus)

• Flow blockage in a transonic axial flow compressor: Simulation analysis under distorted conditions

  Srinivas, G., Raghunandana, K. & Shenoy, B. S., 01-01-2018, In: International Journal of Engineering and Technology(UAE). 7, 2, p. 43-49 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Axial-flow compressors
  • Air
  • Engines
  • Aircraft
  • Machinery

• Heat transfer augmentation and cooling of a turbine blade using an innovative converging-diverging ducts - A CFD study

  Kini, C. R., Purohit, S., Bhagat, K. K. & Satish Shenoy, B., 01-01-2018, In: International Review of Mechanical Engineering. 12, 7, p. 570-579 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Ducts
  • Turbomachine blades
  • Turbines
  • Computational fluid dynamics
  • Cooling
  1 Citation (Scopus)

• Influence of fabric orientation and compression factor on the mechanical properties of 3D E-glass reinforced epoxy composites

  Nayak, S. Y., Satish, S. B., Sultan, M. T. H., Kini, C. R., Rajath Shenoy, K., Samant, R., Sarvade, P. P., Basri, A. A. & Mustapha, F., 2020, In: Journal of Materials Research and Technology. 9, 4, p. 8517-8527 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Compaction
  • Glass
  • Mechanical properties
  • Composite materials
  • Yarn
  4 Citations (Scopus)

• Influence of stacking sequence on the mechanical properties of 3D E-glass/bamboo non-woven hybrid epoxy composites

  Nayak, S. Y., Shenoy, B. S., Sultan, M. T. B. H., Kini, C. R., Shenoy, K. R., Acharya, A. & Jaideep, J. P., 2020, In: Materials Today: Proceedings. 38, p. 2431-2438 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Investigation of coronavirus deposition in realistic human nasal cavity and impact of social distancing to contain COVID-19: A computational fluid dynamic approach

  Zuber, M., Corda, J. V., Ahmadi, M., Satish Shenoy, B., Badruddin, I. A., Anqi, A. E., Ahmad, K. A., Abdul Khader, S. M., Lewis, L., Khan, M. A. & Kamangar, S., 15-12-2020, In: CMES - Computer Modeling in Engineering and Sciences. 125, 3, p. 1185-1199 15 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Computational Fluid Dynamics
  • Cavity
  • Human
  • Computational fluid dynamics
  • Viruses

• Numerical investigation of flexibility: Open-cell versus closed-cell stent designs

  Bekal, C., Shenoy B., S. & Shetty, R., 04-2020, In: International Review of Mechanical Engineering. 14, 4, p. 224-229 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Stents
  • Geometry
  • Biomedical equipment
  • Bending moments

• Numerical investigation of influence of number of stent cells and type of link on expansion and haemodynamic behaviour of balloon-expandable coronary stent

  Bekal, C., Shetty, R. & Shenoy, S., 01-06-2018, In: Sadhana - Academy Proceedings in Engineering Sciences. 43, 6, 88.

  Research output: Contribution to journal › Article › peer-review

  • hemodynamics
  • arteries
  • shear stress
  • blood flow
  • cells
  3 Citations (Scopus)

• Numerical investigation on arterial stress and displacement pattern in the vicinity of stent crown in a coronary stent

  Bekal, C., Satish Shenoy, B. & Shetty, R., 08-2020, In: Malaysian Journal of Medicine and Health Sciences. 16, p. 18-22 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Crowns
  • Stents
  • Equipment and Supplies
  • Myocardium
  • Coronary Vessels

• Optimized trapezoidal-shaped hip implant for total hip arthroplasty using finite element analysis

  Chethan, K. N., Mohammad, Z., Shyamasunder Bhat, N. & Satish Shenoy, B., 01-01-2020, In: Cogent Engineering. 7, 1, 1719575.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Arthroplasty
  • Finite element method
  • Mechanical engineering
  • Orthotics
  • Orthopedics
  1 Citation (Scopus)

• Patient-specific static structural analysis of femur bone of different lengths

  Chethan, K. N., Bhat, S. N., Zuber, M. & Shenoy, S. B., 01-01-2018, In: Open Biomedical Engineering Journal. 12, 1, p. 108-114 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Structural analysis
  • Bone
  • Femur
  • Bone and Bones
  • Weight-Bearing
  4 Citations (Scopus)

• Periprosthetic bone response to axial loading following TKR: Effect of polyethylene thickness and implant material – a finite element analysis study

  Baliga, R., Rao, S. K., Pai, R., Shenoy, S. B., Hegde, A. K., Swaroop, S. & Shetkar, A., 16-10-2019, In: Multidiscipline Modeling in Materials and Structures.

  Research output: Contribution to journal › Article › peer-review

  • Implant
  • Bone
  • Polyethylene
  • Polyethylenes
  • Finite Element

• Potential of Natural Fibers in Composites for Ballistic Applications–A Review

  Nayak, S. Y., Sultan, M. T. H., Shenoy, S. B., Kini, C. R., Samant, R., Shah, A. U. M. & Amuthakkannan, P., 2020, In: Journal of Natural Fibers. p. 1-11 11 p.

  Research output: Contribution to journal › Review article › peer-review

  • Natural fibers
  • Ballistics
  • Composite materials
  • Armor
  • Synthetic fibers
  11 Citations (Scopus)

• Recent developments in turbomachinery component materials and manufacturing challenges for aero engine applications

  Srinivas, G., Raghunandana, K. & Satish Shenoy, B., 01-03-2018, In: IOP Conference Series: Materials Science and Engineering. 314, 1, 012012.

  Research output: Contribution to journal › Conference article › peer-review

  • Turbomachinery
  • Engines
  • Propulsion
  • Turboprop engines
  • Turbojet engines
  4 Citations (Scopus)

• Review on carbon fiber reinforced polymer (CFRP) and their mechanical performance

  Hegde, S., Satish Shenoy, B. & Chethan, K. N., 01-01-2019, In: Materials Today: Proceedings. 19, p. 658-662 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Carbon Fiber
  • Carbon fibers
  • Polymers
  • Adhesives
  • Silanes
  6 Citations (Scopus)

• Review on unconventional wind energy

  Gulabani, G., Karim, B. S. A., Radhakrishnan, J., Satish Shenoy, B. & Zuber, M., 2020, In: Journal of Engineering and Technological Sciences. 52, 4, p. 565-583 19 p.

  Research output: Contribution to journal › Review article › peer-review

  Open Access

  • Wind turbines
  • Wind power
  • Fossil fuels
  • Environmental regulations
  • Offshore wind turbines

• Role of different orthopedic biomaterials on wear of hip joint prosthesis: A review

  Chethan, K. N., Satish Shenoy, B. & Shyamasunder Bhat, N., 01-01-2018, In: Materials Today: Proceedings. 5, 10, p. 20827-20836 10 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Joint prostheses
  • Biomaterials
  • Orthopedics
  • Biocompatible Materials
  • Wear of materials
  8 Citations (Scopus)

• Stability characteristics of a tri-taper journal bearing: A linearized perturbation approach

  Pai, R., Rao, D. S., Shenoy, B. S. & Pai, R. S., 2012, In: Journal of Materials Research and Technology. 1, 2, p. 84-90 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Journal bearings
  • Reynolds equation
  • Finite difference method
  • Linearization
  • Boundary conditions
  1 Citation (Scopus)

• Static structural analysis of different stem designs used in total hip arthroplasty using finite element method

  K.N., C., Zuber, M., Bhat N., S., Shenoy B., S. & R. Kini, C., 01-06-2019, In: Heliyon. 5, 6, e01767.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Arthroplasty
  • Structural analysis
  • Cobalt alloys
  • Chromium alloys
  • Finite element method
  7 Citations (Scopus)

• Steady state characteristics of misaligned multiple axial groove water-lubricated journal bearing

  Mallya, R., Shenoy, S. B. & Pai, R., 03-06-2015, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 229, 6, p. 712-722 11 p.

  Research output: Contribution to journal › Article › peer-review

  • journal bearings
  • Journal bearings
  • grooves
  • misalignment
  • Friction
  28 Citations (Scopus)