Find Research outputs

Search results

• Article

  Analysis on magnetocaloric and structural properties of heusler alloys used in magnetic refrigeration

  Sandeep Nambiar, S., Murthy, B. R. N., Sharma, S. & Prasanna, A. A., 08-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 4, p. 29-46 18 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Magnetic refrigeration
  • Structural properties
  • Martensitic transformations
  • Temperature
  • Refrigerants

• Analytical study on the effect of copper and nickel in austempered ductile iron using analysis of variance

  Hindi, J., Gurumurthy, B. M., Sharma, S., Gowrishankar, M. C., Jain, N. & Muralidhar, M., 01-08-2018, In: International Journal of Mechanical Engineering and Technology. 9, 8, p. 286-295 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Iron analysis
  • Nodular iron
  • Analysis of variance (ANOVA)
  • Nickel
  • Copper

• Behavioral study of mechanical properties of glass fiber-epoxy composites under moisture absorption

  Kini, U. A., Shettar, M., Sharma, S. & Hiremath, P., 01-07-2018, In: International Journal of Mechanical Engineering and Technology. 9, 7, p. 1-5 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Glass fibers
  • Moisture
  • Bending strength
  • Mechanical properties
  • Tensile strength
  5 Citations (Scopus)

• Coated and uncoated reinforcements metal matrix composites characteristics and applications–A critical review

  B M, K., M C, G., Sharma, S., Hiremath, P., Shettar, M. & Shetty, N., 2020, In: Cogent Engineering. 7, 1, 1856758.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Metals
  • Reinforcement
  • Composite materials
  • Nickel
  • Copper

• Comparison of machinability of manganese alloyed austempered ductile iron produced using conventional and two step austempering processes

  Hegde, A. & Sharma, S., 01-05-2018, In: Materials Research Express. 5, 5, 056519.

  Research output: Contribution to journal › Article › peer-review

  • Nodular iron
  • Manganese
  • Machinability
  • Hardness
  • Toughness
  2 Citations (Scopus)

• Effect of graphite and granite dust particulates as micro-fillers on tribological performance of Al 6061-T6 hybrid composites

  Pai, A., Sharma, S. S., D'Silva, R. E. & Nikhil, R. G., 17-08-2015, In: Tribology International. 92, p. 462-471 10 p., 3770.

  Research output: Contribution to journal › Article › peer-review

  • granite
  • hybrid composites
  • Graphite
  • Granite
  • Dust
  29 Citations (Scopus)

• Effect of heat treatment and inhibitor on corrosion behavior of AISI 4140 steel

  Bhagyalaxmi, Sharma, S. & Kini, U. A., 01-01-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 87-100 14 p., IJMPERDAPR20208.

  Research output: Contribution to journal › Article › peer-review

  • Thioureas
  • Thiourea
  • Corrosion inhibitors
  • Steel
  • Heat treatment

• Effect of heat treatment and mechanical characterization of AISI 4140 steel

  Bhagyalaxmi, Sharma, S. & Kini, V., 29-11-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 6, p. 603-610 8 p., IJMPERDDEC201863.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Characterization (materials science)
  • Heat treatment
  • Tensile strength
  • Hardness
  3 Citations (Scopus)

• Effect of post carburizing treatments on residual stress distribution in plain carbon and alloy steels- A numerical analysis

  Hiremath, P., Sharma, S., Gowrishankar, M. C., Shettar, M. & Gurumurthy, B. M., 2020, In: Journal of Materials Research and Technology. 9, 4, p. 8439-8450 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Carburizing
  • Steel
  • Alloy steel
  • Carbon steel
  • Numerical analysis

• Effect of post welded heat treatment on tungsten inert gas welded Al6061-SiC composites

  Jayashree, P. K., Sharma, S. S. & Shetty, R., 01-07-2018, In: International Journal of Mechanical Engineering and Robotics Research. 7, 4, p. 331-337 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Inert gases
  • Tungsten
  • Silicon carbide
  • Heat treatment

• Effect of precipitation hardening on stir cast AL6061-B₄C reinforced composite

  Gowri Shankar, M. C., Jayashree, P. K., Sharma, S. & Kini, A., 01-01-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 5, p. 459-466 8 p., IJMPERDOCT201851.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Aging of materials
  • Composite materials
  • Tensile strength
  • Hardness

• Effect of preheat treatment structure on mechanical characterization of AISI 4340 ferrite bainite dual phase steel

  Gurumurthy, B. M., Sharma, S. S., Kini, A. & Mansoor, S. I., 01-08-2018, In: International Journal of Mechanical Engineering and Technology. 9, 8, p. 84-89 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Dual phase steel
  • Bainite
  • Ferrite
  • Ductility
  • Salts
  3 Citations (Scopus)

• Effect of SiC particulate reinforcement on the precipitation hardening behavior of two step stir cast Al 6061 alloy

  Gowri Shankar, M. C., Achutha Kini, U., Sharma, S. S. & Prabhu, P. R., 01-01-2015, In: International Journal of Applied Engineering Research. 10, 78, p. 18-24 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Reinforcement
  • Aging of materials
  • Precipitates
  • Composite materials
  2 Citations (Scopus)

• Enhancement in Hardness and Influence of Artificial Aging on Stir Cast Al6061-B₄C and Al6061-SiC Composites

  Gowri Shankar, M. C., Shettar, M., Sharma, S. S., Kini, A. & Jayashree, 01-01-2018, In: Materials Today: Proceedings. 5, 1, p. 2435-2443 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Aging of materials
  • Hardness
  • Composite materials
  • Age hardening
  • Alloying elements
  4 Citations (Scopus)

• Experimental validity on the casting characteristics of stir cast aluminium composites

  Gowrishankar, M. C., Hiremath, P., Shettar, M., Sharma, S. & Satish Rao, U., 01-01-2020, In: Journal of Materials Research and Technology.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Aluminum
  • Casting
  • Composite materials
  • Reinforcement
  • Aluminum alloys
  6 Citations (Scopus)

• Hygrothermal chamber aging effect on mechanical behavior and morphology of glass fiber-epoxy-nanoclay composites

  Shettar, M., Kini, U. A., Sharma, S., Hiremath, P. & Gowrishankar, G. C. G., 01-01-2020, In: Materials Research Express. 7, 1, 015318.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • fiberglass
  • Glass fibers
  • Aging of materials
  • Composite materials
  • Casting
  4 Citations (Scopus)

• Influence of aging temperature and aging time on the mechanical property and microstructure during precipitation hardening of Al 6061 alloy

  Gowri, S. M. C., Achutha, K. U., Sharma, S. S. & Prabhu, P. R., 01-01-2015, In: International Journal of Applied Engineering Research. 10, 78, p. 25-31 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Aging of materials
  • Electron microscopes
  • Microstructure
  • Mechanical properties
  3 Citations (Scopus)

• Influence of homogenization and aging on tensile strength and fracture behavior of TIG welded Al6061-SiC composites

  Jayashree, P. K., Gowrishankar, M. C., Sharma, S., Shetty, R., Shettar, M. & Hiremath, P., 01-01-2020, In: Journal of Materials Research and Technology.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Tensile strength
  • Aging of materials
  • Composite materials
  • Hardness
  • Metals

• Influence of solutionising and aging treatments on mechanical behavior of Stir-Cast eutectoid steel powder reinforced Al 7075 metal matrix composites

  Rajesh, Sharma, S. & Gowrishankar, M. C., 01-01-2018, In: International Journal of Automotive and Mechanical Engineering. 15, 3, p. 5583-5591 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Carbon steel
  • Powders
  • Aging of materials
  • Composite materials
  • Tensile strength
  5 Citations (Scopus)

• Machinability and related properties of austempered ductile iron: A review

  Hegde, A., Sharma, S. & Gowri Shankar, M. C., 01-12-2018, In: Journal of Mechanical Engineering and Sciences. 12, p. 4180-4190 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Nodular iron
  • Machinability
  • Wear resistance
  • Mechanical properties
  • Graphite
  2 Citations (Scopus)

• Machinability study of manganese alloyed austempered ductile iron

  Hegde, A. & Sharma, S., 01-07-2018, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 40, 7, 338.

  Research output: Contribution to journal › Article › peer-review

  • Nodular iron
  • Machinability
  • Manganese
  • Surface roughness
  • Machining

• Mechanical characteristics evaluation of dual phase and related hardening techniques on AISI 4340 steel

  Gurumurthy, B. M., Sharma, S., Achutha Kini, U., Hegde, A. & Patil, A., 01-12-2018, In: Journal of Mechanical Engineering and Sciences. 12, p. 4018-4029 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Hardening
  • Ferrite
  • Steel
  • Bainite
  • Martensite
  5 Citations (Scopus)

• Mechanical characterization of deformed and heat treated copper-eutectoid steel powder reinforced composites

  Gowri Shankar, M. C., Sharma, S., Karthik, B. M., Pinjar, A. D., Jose, N. & Shriyan, H. C., 01-01-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 6, p. 289-302 14 p.

  Research output: Contribution to journal › Article › peer-review

  • Powders
  • Copper
  • Carbon steel
  • Reinforcement
  • Composite materials

• Mechanical characterization of dual phase and austempered aisi 1040 normalized steel

  Gurumurthy, B. M., Shivaprakash, Y. M., Sharma, S., Achutha Kini, U. & Mathur, R., 01-01-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 247-258 12 p., IJMPERDAPR202022.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Carbon steel
  • Mechanical properties
  • Dual phase steel
  • Bainite

• Microstructure and fracture behaviour of two stage stir cast Al6061-SiC composites

  Gowri Shankar, M. C., Sharma, S. S., Achutha Kini, U., Hiremath, P. & Gurumurthy, 01-01-2017, In: Journal of Materials and Environmental Science. 8, 1, p. 257-263 7 p.

  Research output: Contribution to journal › Article › peer-review

  • microstructure
  • Microstructure
  • rupture
  • Composite materials
  • mechanical property
  5 Citations (Scopus)

• Microstructure authentication on mechanical property of medium carbon Low alloy duplex steels

  Gurumurthy, B. M., Gowrishankar, M. C., Sharma, S., Kini, A., Shettar, M. & Hiremath, P., 01-01-2020, In: Journal of Materials Research and Technology.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Duplex stainless steel
  • Alloy steel
  • Martensite
  • Carbon
  • Authentication
  1 Citation (Scopus)

• Multi-response optimization of the turn-assisted deep cold rolling process parameters for enhanced surface characteristics and residual stress of AISI 4140 steel shafts

  Prabhu, P. R., Kulkarni, S. M. & Sharma, S., 2020, In: Journal of Materials Research and Technology. 9, 5, p. 11402-11423 22 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Cold rolling
  • Steel
  • Residual stresses
  • Fatigue of materials
  • Surface hardening
  1 Citation (Scopus)

• Potentiality of artificially aged aluminium 6061 hybrid composites reinforced with granite and graphite micro–fillers for structural applications: Potenzial von künstlich gealterten, mit Granit und Graphit verstärkten Aluminium- (6061) Hybrid-Verbundwerkstoffen für konstruktive Anwendungen

  Sharma, S. S., Pai, A. & Gowrishankar, M. C., 01-12-2017, In: Materialwissenschaft und Werkstofftechnik. 48, 11, p. 1082-1092 11 p.

  Research output: Contribution to journal › Article › peer-review

  • granite
  • hybrid composites
  • Graphite
  • Granite
  • Aluminum

• Production, testing and microstructural investigation on fly ash reinforced aluminium alloy matrix composite

  Shivaprakash, Y. M., Gurumurthy, B. M., Sharma, S. S., Jayashree, P. K. & Gowrishankar, M. C., 01-01-2015, In: International Journal of Applied Engineering Research. 10, 20, p. 41583-41590 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Fly ash
  • Aluminum alloys
  • Composite materials
  • Testing
  • Precipitates
  1 Citation (Scopus)

• Quality enhancement of TIG Welded Al6061 SiCp composites by age hardening process

  Shankar, M. C. G., Jayashree, P. K., Sharma, S. S., Shetty, R. & Vinay, K., 01-01-2018, In: International Journal of Automotive and Mechanical Engineering. 15, 3, p. 5573-5582 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Inert gases
  • Tungsten
  • Welds
  • Tensile strength
  3 Citations (Scopus)

• Quench hardening and mechanical characterization of AISI 4140 steel

  Bhagyalaxmi, Sharma, S. & Shetty, A., 01-04-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 2, p. 589-594 6 p., IJMPERDAPR201958.

  Research output: Contribution to journal › Article › peer-review

  • Castor Oil
  • Steel
  • Hardening
  • Ice
  • Oils

• Sliding Wear Behaviour of Nickel-Coated Short Fibre-Reinforced Al7075 Composites

  Kumar, N., Kiran, M. D., Sharma, S. S., Ravikiran Kamath, B. & Veeresha, R. K., 01-10-2020, In: Journal of Failure Analysis and Prevention.

  Research output: Contribution to journal › Article › peer-review

  • Carbon Fiber
  • Nickel
  • Carbon fibers
  • Wear of materials
  • Fibers

• Study of cycle time reduction and assembly process improvement for various electric stackers

  Hiremath, P., Kumara, K., Sharma, S., Joseph, C. & Gowrishankar, M. C., 04-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 779-792 14 p., IJMPERDAPR202078.

  Research output: Contribution to journal › Article › peer-review

  • Standardization
  • Materials handling
  • Welding
  • Pipe fittings
  • Hydraulic actuators

• Study on Mechanical Characteristics of Nanoclay Reinforced Polymer Composites

  Shettar, M., Achutha Kini, U., Sharma, S. S. & Hiremath, P., 01-01-2017, In: Materials Today: Proceedings. 4, 10, p. 11158-11162 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Polymers
  • Polyesters
  • Tensile strength
  • Hardness
  • Resins
  16 Citations (Scopus)

• Surface Properties and Corrosion Behavior of Turn-Assisted Deep-Cold-Rolled AISI 4140 Steel

  Prabhu, P. R., Prabhu, D., Sharma, S. & Kulkarni, S. M., 01-09-2020, In: Journal of Materials Engineering and Performance.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Steel
  • Surface properties
  • Corrosion
  • Corrosion rate
  • Residual stresses

• Tensile fractography of artificially aged Al6061-B4C composites

  Sharma, S., Kini, A., Shankar, G., Rakesh, T. C., Raja, H., Chaitanya, K. & Shettar, M., 01-09-2018, In: Journal of Mechanical Engineering and Sciences. 12, 3, p. 3866-3875 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Fractography
  • Aging of materials
  • Composite materials
  • Hardness
  • Reinforcement
  12 Citations (Scopus)

• The hardness behaviour of TIG welded al6061 alloy using statistical tool

  Jayashree, P. K., Raviraj, S., Sharma, S. S. & Shankar, G., 01-06-2018, In: Iranian Journal of Materials Science and Engineering. 15, 2, p. 88-96 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Aging of materials
  • Hardness
  • Noble Gases
  • Tungsten
  • Age hardening

• Turn-assisted deep cold rolling: An innovative manufacturing method for the improvement of fatigue life

  Prabhu, P. R., Sharma, S. S., Kulkarni, S. M. & Gowrishankar, M. C., 01-01-2015, In: International Journal of Applied Engineering Research. 10, 78, p. 64-68 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Cold rolling
  • Fatigue of materials
  • Shot peening
  • Steel
  • Burnishing
  2 Citations (Scopus)
• Conference article

  Ferrite-Bainite Dual Phase Structure and Mechanical Characterization of AISI 4340 Steel

  Gurumurthy, B. M., Sharma, S. S. & Kini, A., 01-01-2018, In: Materials Today: Proceedings. 5, 11, p. 24907-24914 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Phase structure
  • Bainite
  • Steel
  • Ferrite
  • Characterization (materials science)
  5 Citations (Scopus)

• Hygrothermal Studies on GFRP Composites: A Review

  Shettar, M., Chaudhary, A., Hussain, Z., Kini, U. A. & Sharma, S., 09-01-2018, In: MATEC Web of Conferences. 144, 02026.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Glass fibers
  • Polymers
  • Composite materials
  • Environmental chambers
  7 Citations (Scopus)

• Multiple response optimisation of process parameters during drilling of GFRP composite with a solid carbide twist drill

  Bhat, R., Mohan, N., Sharma, S., Pai, D. & Kulkarni, S., 01-01-2020, In: Materials Today: Proceedings. 28, p. 2039-2046 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Glass fibers
  • Carbides
  • Polymers
  • Drilling
  1 Citation (Scopus)

• Multi response parametric optimisation in machining of marine application based GFRP composite with HSS drill: Application of TOPSIS approach

  Bhat, R., Mohan, N., Sharma, S., Kini, A. U., Shivakumar, S. & Naik, N., 01-01-2020, In: Materials Today: Proceedings. 28, p. 2077-2083 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Marine applications
  • fiberglass
  • Machining
  • Glass fibers
  • Composite materials
  2 Citations (Scopus)

• Optimization of TIG welding parameters for 6061Al alloy using Taguchi's design of experiments

  Jayashree, P. K., Sharma, S. S., Shetty, R., Mahato, A. & Gowrishankar, M. C., 01-01-2018, In: Materials Today: Proceedings. 5, 11, p. 23648-23655 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Inert gas welding
  • Tungsten
  • Design of experiments
  • Welding
  • Welds
  4 Citations (Scopus)

• Property Enhancement during Artificial Aging of Al6061- Silicon Oxide Metal Matrix Composites

  Prakash, Y. M. S., Shankar, M. C. G., Karthik, Sharma, S. S. & Kini, A., 01-01-2018, In: Materials Today: Proceedings. 5, 11, p. 24186-24193 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Silicon oxides
  • Metals
  • Aging of materials
  • Hardness
  • Composite materials
  3 Citations (Scopus)

• Study on Spheroidization and Related Heat Treatments of Medium Carbon Alloy Steels

  Harisha, S. R., Sharma, S., Kini, U. A. & Gowri Shankar, M. C., 09-01-2018, In: MATEC Web of Conferences. 144, 02008.

  Research output: Contribution to journal › Conference article › peer-review

  • Alloy steel
  • Carbon steel
  • Heat treatment
  • Carbon
  • Iron alloys
  3 Citations (Scopus)

• Surface properties of epoxy clay nanocomposite coating

  Muralishwara, K., Kini, U. A. & Sharma, S., 2020, In: Materials Today: Proceedings. 38, p. 2725-2731 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Clay
  • Sonication
  • Nanocomposites
  • Surface properties
  • Hardness
• Conference contribution

  Effect of artificial aging on fracture behavior of Al6061-Silica (SiO₂) composites

  Jagannath, K., Sharma, S. S., Prabhu, P. R., Gowri Shankar, S. M. C. & Harisha, S. R., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 59-62 4 p. (Materials Science Forum; vol. 880).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Silicon Dioxide
  • Silica
  • Aging of materials
  • silicon dioxide
  • composite materials
  1 Citation (Scopus)

• Effect of homogenizing and age hardening on mechanical property enhancement of TIG welded Al6061 SIC_p composites

  Jayashree, P. K., Sharma, S. S. & Shetty, R., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 89-93 5 p. (Materials Science Forum; vol. 909 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Noble Gases
  • Tungsten
  • Age hardening
  • Inert gases
  • precipitation hardening

• Ferrite-martensite dual phase treatment of AISI 1040 steel and mechanical characterization

  Gurumurthy, B. M., Sharma, S. S. & Kini, A. U., 01-01-2017, Advanced Materials and Engineering Materials VI - 6th ICAMEM. Trans Tech Publications Ltd, p. 280-283 4 p. (Key Engineering Materials; vol. 748 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Martensite
  • Steel
  • Ferrite
  • Tempering
  • Impact resistance
  2 Citations (Scopus)

• FRP-Nanoclay hybrid composites: A review

  Shettar, M., Kini, A., Sharma, S. & Hiremath, P., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 146-150 5 p. (Materials Science Forum; vol. 904 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • hybrid composites
  • mechanical properties
  • Mechanical properties
  • Composite materials
  • Nanocomposites
  10 Citations (Scopus)