Find Research outputs

Search results

• 2019

  Three dimensional assessment of protraction in craniofacial structures of cleft lip and palate model using Facemask and Maxgym

  Parveen, S., Husain, A., Shenoy, S., Mascarenhas, R., Gosla Reddy, S. & Reddy, M., 01-01-2019, In: Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 553-561 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Three-dimensional
  • Model
  • Computerized tomography
  • Vertex of a graph
  • Large Displacements

• Three-dimensional assessment of transverse displacement with Facemask and Maxgym in unilateral cleft lip and palate model

  Parveen, S., Husain, A., Reddy, S. G., Mascarenhas, R., Shenoy, S. & Reddy, M., 01-04-2019, In: Journal of Indian Society of Pedodontics and Preventive Dentistry. 37, 2, p. 177-184 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Palatal Expansion Technique
  • Cleft Lip
  • Cleft Palate
  • Crowns
  • Bicuspid
• 2020

  A study to compare the stress patterns in the edentulous mandibular bone around the two implant retained over denture and the prosthesis restored with all-on-four concept using the three dimensional finite element analysis

  Hegde, P., Shenoy, S., Rodrigues, S., Shetty, T., Pai, U., Saldhana, S. & Mahesh, M., 01-01-2020, In: Indian Journal of Forensic Medicine and Toxicology. 14, 1, p. 130-133 4 p.

  Research output: Contribution to journal › Article › peer-review

  • Implant-Supported Dental Prosthesis
  • Overlay Denture
  • Dental prostheses
  • Finite Element Analysis
  • Dentures

• A study to compare the stress patterns in the edenulous mandibalur bone around the two implant retained over denture and the prosthesis restored with all-on-four concept using the three dimensional finite element analysis

  Hegde, P., Shenoy, S., Rodrigues, S., Shetty, T., Pai, U., Saldhana, S. & Mahesh, M., 01-01-2020, In: Indian Journal of Forensic Medicine and Toxicology. 14, 1, p. 149-153 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Implant-Supported Dental Prosthesis
  • Overlay Denture
  • Dental prostheses
  • Finite Element Analysis
  • Dentures

• Comparative evaluation of stress distribution around mandibular overdentures surrounded by three and four implants: A three‐dimensional finite element analysis

  Azwin, A., Hegde, M., Shenoy, V. K., Shenoy, S., Prabhu, B., Upadhya, M. & Rodrigues, S., 01-10-2020, In: Indian Journal of Forensic Medicine and Toxicology. 14, 4, p. 115-121 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Overlay Denture
  • Finite Element Analysis
  • Stress concentration
  • Bone
  • Finite element method

• Comparison of stress patterns in edentulous mandibular bone around two implant retained, four implant retained overdenture and all-on-four concept.-A 3 dimensional finite element analysis

  Hegde, P., Rodrigues, S., Shenoy, S., Shetty, T., Pai, U., Saldhana, S. & Mahesh, M., 01-07-2020, In: Indian Journal of Forensic Medicine and Toxicology. 14, 3, p. 589-595 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Overlay Denture
  • Finite Element Analysis
  • Bone
  • Finite element method
  • Bone and Bones

• Corrigendum to “Static structural analysis of different stem designs used in total hip arthroplasty using finite element method” (Heliyon (2019) 5(6), (S2405844019310035), (10.1016/j.heliyon.2019.e01767))

  Chethan, K. N., Zuber, M., Bhat, N. S., Shenoy, B. S. & R. Kini, C., 01-2020, In: Heliyon. 6, 1, e03080.

  Research output: Contribution to journal › Comment/debate › peer-review

  Open Access

  • Arthroplasty
  • Hip

• Experimental investigation on dynamic and static transverse behaviour of thin woven Carbon/Aramid hybrid laminates

  Andrews Zachariah, S., Satish Shenoy, B., Jayan, J. & Pai, K. D., 2020, (Accepted/In press) In: Journal of King Saud University - Engineering Sciences.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Carbon
  • Laminates
  • Impact strength
  • carbon fiber reinforced plastic
  • Carbon Fiber

• Influence of fabric orientation and compression factor on the mechanical properties of 3D E-glass reinforced epoxy composites

  Nayak, S. Y., Satish, S. B., Sultan, M. T. H., Kini, C. R., Rajath Shenoy, K., Samant, R., Sarvade, P. P., Basri, A. A. & Mustapha, F., 2020, In: Journal of Materials Research and Technology. 9, 4, p. 8517-8527 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Compaction
  • Glass
  • Mechanical properties
  • Composite materials
  • Yarn
  1 Citation (Scopus)

• Investigation of coronavirus deposition in realistic human nasal cavity and impact of social distancing to contain COVID-19: A computational fluid dynamic approach

  Zuber, M., Corda, J. V., Ahmadi, M., Satish Shenoy, B., Badruddin, I. A., Anqi, A. E., Ahmad, K. A., Abdul Khader, S. M., Lewis, L., Khan, M. A. & Kamangar, S., 15-12-2020, In: CMES - Computer Modeling in Engineering and Sciences. 125, 3, p. 1185-1199 15 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Computational Fluid Dynamics
  • Cavity
  • Human
  • Computational fluid dynamics
  • Viruses

• Numerical investigation of flexibility: Open-cell versus closed-cell stent designs

  Bekal, C., Shenoy B., S. & Shetty, R., 04-2020, In: International Review of Mechanical Engineering. 14, 4, p. 224-229 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Stents
  • Geometry
  • Biomedical equipment
  • Bending moments

• Numerical investigation on arterial stress and displacement pattern in the vicinity of stent crown in a coronary stent

  Bekal, C., Satish Shenoy, B. & Shetty, R., 08-2020, In: Malaysian Journal of Medicine and Health Sciences. 16, p. 18-22 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Crowns
  • Stents
  • Equipment and Supplies
  • Myocardium
  • Coronary Vessels

• Optimized trapezoidal-shaped hip implant for total hip arthroplasty using finite element analysis

  Chethan, K. N., Mohammad, Z., Shyamasunder Bhat, N. & Satish Shenoy, B., 01-01-2020, In: Cogent Engineering. 7, 1, 1719575.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Arthroplasty
  • Finite element method
  • Mechanical engineering
  • Orthotics
  • Orthopedics
  1 Citation (Scopus)

• Potential of Natural Fibers in Composites for Ballistic Applications–A Review

  Nayak, S. Y., Sultan, M. T. H., Shenoy, S. B., Kini, C. R., Samant, R., Shah, A. U. M. & Amuthakkannan, P., 2020, In: Journal of Natural Fibers. p. 1-11 11 p.

  Research output: Contribution to journal › Review article › peer-review

  • Natural fibers
  • Ballistics
  • Composite materials
  • Armor
  • Synthetic fibers
  6 Citations (Scopus)

• Review on unconventional wind energy

  Gulabani, G., Karim, B. S. A., Radhakrishnan, J., Satish Shenoy, B. & Zuber, M., 2020, In: Journal of Engineering and Technological Sciences. 52, 4, p. 565-583 19 p.

  Research output: Contribution to journal › Review article › peer-review

  Open Access

  • Wind turbines
  • Wind power
  • Fossil fuels
  • Environmental regulations
  • Offshore wind turbines

• Three-dimensional finite element analysis of initial displacement and stress on the craniofacial structures of unilateral cleft lip and palate model during protraction therapy with variable forces and directions

  Parveen, S., Husain, A., Gosla Reddy, S., Mascarenhas, R. & Shenoy, S., 2020, (Accepted/In press) In: Computer Methods in Biomechanics and Biomedical Engineering.

  Research output: Contribution to journal › Article › peer-review

  • Arches
  • Direction compound
  • Finite element method

• Wear estimation of trapezoidal and circular shaped hip implants along with varying taper trunnion radiuses using finite element method

  K N, C., Ogulcan, G., Bhat N, S., Zuber, M. & Shenoy B, S., 11-2020, In: Computer Methods and Programs in Biomedicine. 196, 105597.

  Research output: Contribution to journal › Article › peer-review

  • Hip
  • Wear of materials
  • Joints
  • Finite element method
  • Thigh