Find Research outputs

Search results

• 2012

  Effect of nanoparticles additives on the performance of an externally adjustable fluid film bearing

  Shenoy, B. S., Binu, K. G., Pai, R., Rao, D. S. & Pai, R., 01-01-2012, In: Tribology International. 45, 1, p. 38-42 5 p.

  Research output: Contribution to journal › Article › peer-review

  • fluid films
  • application programming interface
  • Nanoparticles
  • Application programming interfaces (API)
  • oils
  49 Citations (Scopus)

• Effect of turbulence and offset loading on the performance of a single pad externally adjustable fluid film bearing

  Satish, S. B., Rammohan, P. B. S., Raghuvir, P. B. & Shrikanth, R. D., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, AND C ed. Vol. 3. p. 977-983 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Reynolds equation
  • Finite difference method
  • Turbulence models
  • Aspect ratio
  • Turbulence

• Stability characteristics of a tri-taper journal bearing: A linearized perturbation approach

  Pai, R., Rao, D. S., Shenoy, B. S. & Pai, R. S., 2012, In: Journal of Materials Research and Technology. 1, 2, p. 84-90 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Journal bearings
  • Reynolds equation
  • Finite difference method
  • Linearization
  • Boundary conditions
  1 Citation (Scopus)
• 2013

  Development of short areca fiber reinforced biodegradable composite material

  Padmaraj, N. H., Kini, M. V., Pai, B. R. & Shenoy, B. S., 01-01-2013, In: Procedia Engineering. 64, p. 966-972 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Fibers
  • Composite materials
  • Plasticizers
  • Starch
  • Water
  19 Citations (Scopus)
• 2014

  Static characteristics of a fluid film bearing with TiO₂ based nanolubricant using the modified Krieger-Dougherty viscosity model and couple stress model

  Binu, K. G., Shenoy, B. S., Rao, D. S. & Pai, R., 2014, In: Tribology International. 75, p. 69-79 11 p.

  Research output: Contribution to journal › Article › peer-review

  • TiO2 nanoparticles
  • Shear viscosity
  • fluid films
  • static characteristics
  • Journal bearings
  24 Citations (Scopus)
• 2017

  Comparative approach to knee endoprosthesis stem materials-Static analysis of bone-implant system by the means of FEM

  Pawlik, M., Ravishanker, B. B., Satish, S. B. & Raghuvir, P. B., 2017, In: Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 261-267 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Implant
  • Static Analysis
  • Bone
  • Static analysis
  • Finite element method
  2 Citations (Scopus)

• Dynamic performance characteristics of finite journal bearings operating on TiO₂ based nanolubricants

  Binu, K. G., Yathish, K., Shenoy, B. S., Rao, D. S. & Pai, R., 01-07-2017, In: Pertanika Journal of Science and Technology. 25, 3, p. 963-976 14 p.

  Research output: Contribution to journal › Article › peer-review

  • Journal bearings
  • nanoparticles
  • TiO2 nanoparticles
  • nanoparticle
  • Nanoparticles
  2 Citations (Scopus)

• Effect of grid size on fatigue life calculations of a dental implant

  Swamy, A., Shenoy, B. S. & Aparna, I. N., 2017, In: Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 289-293 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Fatigue Life
  • Implant
  • Dental prostheses
  • Grid
  • Fatigue of materials
  2 Citations (Scopus)

• Effect of grooved cooling passage near the trailing edge region for HP stage gas turbine blade-a numerical investigation

  Kini, C. R., Satish Shenoy, B. & Yagnesh Sharma, N., 01-01-2017, In: Progress in Computational Fluid Dynamics. 17, 6, p. 397-407 11 p.

  Research output: Contribution to journal › Article › peer-review

  • turbine blades
  • trailing edges
  • gas turbines
  • Turbomachine blades
  • Gas turbines
  7 Citations (Scopus)

• Effect of V-shaped ribs on internal cooling of gas turbine blades

  Kamat, H., Shenoy, S. B. & Kini, C. R., 01-01-2017, In: Journal of Engineering and Technological Sciences. 49, 4, p. 520-533 14 p.

  Research output: Contribution to journal › Article › peer-review

  • Turbomachine blades
  • Gas turbines
  • Cooling
  • Turbines
  • Rotors
  4 Citations (Scopus)

• Evaluation of Lingual Orthodontic appliances

  Mascarenhas, R., Shenoy, S., Parveen, S., Chatra, L. & Husain, A., 2017, In: Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 253-260 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Brackets
  • Evaluation
  • Finite element method
  • Ligaments
  • Bone

• Fluid structure interaction study of high pressure stage gas turbine blade having grooved cooling channels

  Kini, C. R., Sharma, N. Y. & Satish Shenoy, B., 01-11-2017, In: International Review of Mechanical Engineering. 11, 11, p. 825-830 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Fluid structure interaction
  • Turbomachine blades
  • Gas turbines
  • Cooling
  • Ducts
  4 Citations (Scopus)

• Mechanical Characterization and Water Ageing Behavior Studies of Grewia Serrulata Bast Fiber Reinforced Thermoset Composites

  Mahesha, G. T., Satish, S. B., Kini, M. V. & Subrahmanya, B. K., 02-11-2017, In: Journal of Natural Fibers. 14, 6, p. 788-800 13 p.

  Research output: Contribution to journal › Article › peer-review

  • Bast fibers
  • Thermosets
  • Characterization (materials science)
  • Aging of materials
  • Fibers
  8 Citations (Scopus)

• Numerical analysis of helical grooved channels near the leading edge region in gas turbine blade

  Kini, C. R., Mendonca, R. M., Yalamarty, S. S., Kamat, H. & Satish Shenoy, B., 01-01-2017, In: International Review of Mechanical Engineering. 11, 3, p. 161-166 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Turbomachine blades
  • Gas turbines
  • Numerical analysis
  • Turbines
  • Cooling
  3 Citations (Scopus)

• Preface

  Pai, R., Shenoy, S. & Khader, A., 2017, In: Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 217-218 2 p.

  Research output: Contribution to journal › Editorial › peer-review

• Recent developments of axial flow compressors under transonic flow conditions

  Srinivas, G., Raghunandana, K. & Satish Shenoy, B., 2017, In: IOP Conference Series: Materials Science and Engineering. 197, 1, 012078.

  Research output: Contribution to journal › Article › peer-review

  • Axial-flow compressors
  • Transonic flow
  • Compressors
  • Turbomachinery
  • Metal foil
  2 Citations (Scopus)

• Selected peer-reviewed articles from the first international conference on healthcare and technical research (ICHTR 2015), Manipal, India, 22–24 december, 2015

  Udupa, N., Shenoy, B. S., Radhakrishnan, R., Janodia, M. D., Chaudhary, S., Devkar, R. A., Jain, P. & Menon, S., 01-03-2017, In: Advanced Science Letters. 23, 3, p. 1714-1717 4 p.

  Research output: Contribution to journal › Comment/debate › peer-review

• Stability of water lubricated bearing using linear perturbation method under turbulent conditions

  Mallya, R., Shenoy, B. S., Pai, R. S. & Pai, R. S., 01-07-2017, In: Pertanika Journal of Science and Technology. 25, 3, p. 995-1008 14 p.

  Research output: Contribution to journal › Article › peer-review

  • Reynolds number
  • whirl
  • perturbation
  • eccentricity
  • damping
  1 Citation (Scopus)

• Static characteristics of misaligned multiple axial groove water-lubricated bearing in the turbulent regime

  Mallya, R., Shenoy, S. B. & Pai, R., 01-03-2017, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 231, 3, p. 385-398 14 p.

  Research output: Contribution to journal › Article › peer-review

  • static characteristics
  • Journal bearings
  • grooves
  • journal bearings
  • Friction
  17 Citations (Scopus)
• 2018

  Application of finite element analysis on balloon expandable coronary stents: A review

  Bekal, C., Yamada, H., Shetty, R. & Shenoy, S., 01-01-2018, In: International Journal of Engineering and Technology(UAE). 7, 3, p. 1640-1647 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Stents
  • Finite Element Analysis
  • Balloons
  • Finite element method
  • Arteries

• Axial-flow compressor analysis under distorted phenomena at transonic flow conditions

  Srinivas, G., Raghunandana, K. & Satish, S. B., 01-01-2018, In: Cogent Engineering. 5, 1, p. 1-20 20 p.

  Research output: Contribution to journal › Article › peer-review

  • Axial-flow compressors
  • Transonic flow
  • Compressors
  • Rotors
  • Stream flow

• Biomechanics of hip joint: A systematic review

  Chethan, K. N., Shyamasunder Bhat, N. & Satish Shenoy, B., 01-01-2018, In: International Journal of Engineering and Technology(UAE). 7, 3, p. 1672-1676 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Biomechanics
  • Hip Joint
  • Joint prostheses
  • Biomechanical Phenomena
  • Systematic Reviews
  3 Citations (Scopus)

• Comparative study of femur bone having different boundary conditions and bone structure using finite element method

  Chethan, K. N., Zuber, M., Bhat, S. N. & Shenoy, S. B., 01-01-2018, In: Open Biomedical Engineering Journal. 12, 1, p. 115-134 20 p.

  Research output: Contribution to journal › Article › peer-review

  • Bone
  • Femur
  • Boundary conditions
  • Finite element method
  • Bone and Bones
  5 Citations (Scopus)

• Comparison of stress patterns in the edentulous mandibular bone around four implant retained over denture and all-on-four concept – A three dimensional finite element analysis

  Hegde, P., Dhanasekar, B., Shenoy, S., Aparna, I. N., Gupta, L., Rodrigues, S. J. & Shetty, T., 01-11-2018, In: Indian Journal of Public Health Research and Development. 9, 11, p. 111-115 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Implant-Supported Dental Prosthesis
  • Finite Element Analysis
  • Dentures
  • Bone and Bones
  • Cortical Bone
  2 Citations (Scopus)

• Effect of fiber treatments on mechanical properties of Grewia serrulata bast fiber reinforced polyester composites

  Mahesha, G. T., Shenoy, S. B., Kini, V. M. & Padmaraja, N. H., 01-01-2018, In: Materials Today: Proceedings. 5, 1, p. 138-144 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Bast fibers
  • Polyesters
  • Fibers
  • Mechanical properties
  • Composite materials
  5 Citations (Scopus)

• Effect of posterior tibial slope and implant material on the bone-implant system following TKA: A finite element study

  Baliga B, R., Pai B, R., Shenoy, S., Hegde K, A., Rao K, S., Swaroop, S. & Shetkar, A., 01-01-2018, In: Cogent Engineering. 5, 1, p. 1-10 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Bone
  • Polyethylene
  • Polyethylenes
  • Shielding
  • Metals
  3 Citations (Scopus)

• Flow blockage in a transonic axial flow compressor: Simulation analysis under distorted conditions

  Srinivas, G., Raghunandana, K. & Shenoy, B. S., 01-01-2018, In: International Journal of Engineering and Technology(UAE). 7, 2, p. 43-49 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Axial-flow compressors
  • Air
  • Engines
  • Aircraft
  • Machinery

• Heat transfer augmentation and cooling of a turbine blade using an innovative converging-diverging ducts - A CFD study

  Kini, C. R., Purohit, S., Bhagat, K. K. & Satish Shenoy, B., 01-01-2018, In: International Review of Mechanical Engineering. 12, 7, p. 570-579 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Ducts
  • Turbomachine blades
  • Turbines
  • Computational fluid dynamics
  • Cooling
  1 Citation (Scopus)

• Numerical investigation of influence of number of stent cells and type of link on expansion and haemodynamic behaviour of balloon-expandable coronary stent

  Bekal, C., Shetty, R. & Shenoy, S., 01-06-2018, In: Sadhana - Academy Proceedings in Engineering Sciences. 43, 6, 88.

  Research output: Contribution to journal › Article › peer-review

  • hemodynamics
  • arteries
  • shear stress
  • blood flow
  • cells
  3 Citations (Scopus)

• Patient-specific static structural analysis of femur bone of different lengths

  Chethan, K. N., Bhat, S. N., Zuber, M. & Shenoy, S. B., 01-01-2018, In: Open Biomedical Engineering Journal. 12, 1, p. 108-114 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Structural analysis
  • Bone
  • Femur
  • Bone and Bones
  • Weight-Bearing
  4 Citations (Scopus)

• Recent developments in turbomachinery component materials and manufacturing challenges for aero engine applications

  Srinivas, G., Raghunandana, K. & Satish Shenoy, B., 01-03-2018, In: IOP Conference Series: Materials Science and Engineering. 314, 1, 012012.

  Research output: Contribution to journal › Conference article › peer-review

  • Turbomachinery
  • Engines
  • Propulsion
  • Turboprop engines
  • Turbojet engines
  3 Citations (Scopus)

• Role of different orthopedic biomaterials on wear of hip joint prosthesis: A review

  Chethan, K. N., Satish Shenoy, B. & Shyamasunder Bhat, N., 01-01-2018, In: Materials Today: Proceedings. 5, 10, p. 20827-20836 10 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Joint prostheses
  • Biomaterials
  • Orthopedics
  • Biocompatible Materials
  • Wear of materials
  8 Citations (Scopus)

• Three dimensional finite element stress analysis of two and four implant supported prosthesis

  Hegde, P., Dhanasekar, B., Shenoy, S., Aparna, I. N., Gupta, L., Umesh, Y. & Mahesh, M., 01-11-2018, In: Indian Journal of Public Health Research and Development. 9, 11, p. 126-131 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Overlay Denture
  • Finite Element Analysis
  • Prostheses and Implants
  • Denture Design
  • Mouth
  2 Citations (Scopus)

• Wear behaviour studies on Grewia Serrulata bast fibre reinforced polymer composites

  Mahesha, G. T., Satish Shenoy, B., Vijaya Kini, M. & Padmaraj, N. H., 01-01-2018, In: Cogent Engineering. 5, 1, p. 1-8 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Bast fibers
  • Polymers
  • Wear of materials
  • Fibers
  • Composite materials
  2 Citations (Scopus)
• 2019

  A Comparative Evaluation of Stress Distribution with Two Attachment Systems of Varying Heights in a Mandibular Implant-Supported Overdenture: A Three-Dimensional Finite Element Analysis

  Khurana, N., Rodrigues, S., Shenoy, S., Saldanha, S., Pai, U., Shetty, T., Srikant, N., Mahesh, M. & Hegde, P., 01-01-2019, In: Journal of Prosthodontics.

  Research output: Contribution to journal › Article › peer-review

  • Overlay Denture
  • Finite Element Analysis
  • Cortical Bone
  • Cancellous Bone
  • Mandible
  3 Citations (Scopus)

• A study on the increasing risks(Trauma) related to an ambulance for a paramedic and patient-A review

  Gupta, R., Satish Shenoy, B., Chethan, K. N. & Zuber, M., 01-10-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 791-802 12 p., IJMPERDOCT201970.

  Research output: Contribution to journal › Article › peer-review

  • Ambulances
  • Emergency vehicles
  • Ergonomics
  • Sensors
  • Accelerometers
  1 Citation (Scopus)

• Combustion chamber design for efficient heat transfer

  Kasturia, K., Saha, A., Singhal, A., Satish Shenoy, B. & Kini, C. R., 01-01-2019, In: ARPN Journal of Engineering and Applied Sciences. 14, 5, p. 1100-1103 4 p.

  Research output: Contribution to journal › Article › peer-review

  • Combustion chambers
  • Heat transfer
  • Engines
  • Gases
  • Diesel engines

• Comparative evaluation of stress distribution in bone surrounding implant using different implant biomaterials: A 3DFEA study

  Haseeb, S. A., Abdul Khader, S. M., Satish Shenoy, B., Naveen, Y. G., Giridhar Kamath, P. & Vinaya, K. C., 01-01-2019, In: Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 523-532 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Biomaterials
  • Implant
  • Bone
  • Stress Distribution
  • Titanium

• Comparison of stress patterns in edentulous mandibular bone around two implant retained, four implant retained overdenture and all-on-four concept - A 3 dimensional finite element analysis

  Hegde, P., Rodrigues, S., Shenoy, S., Shetty, T., Pai, U., Saldhana, S. & Mahesh, M., 01-09-2019, In: Indian Journal of Forensic Medicine and Toxicology. 13, 4, p. 264-269 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Overlay Denture
  • Finite Element Analysis
  • Bone
  • simulation
  • Finite element method

• Effect of chemical treatments on hardness and toughness properties of Grewia serrulata reinforced polymer composites

  Satish Shenoy, B., Mahesha, G. T., Vijaya Kini, M. & Padmaraj, N. H., 01-01-2019, In: Journal of Mechanical Engineering Research and Developments. 42, 4, p. 228-230 3 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Acetylation
  • Toughness
  • Silanes
  • Hardness
  • Polymers
  2 Citations (Scopus)

• Effect of helix angle and cross section of helicoidal ducts in gas turbine blade cooling

  Kini, C. R., Purohit, S., Bhagat, K. K. & Shenoy B., S., 01-01-2019, In: International Review of Mechanical Engineering. 13, 2, p. 87-96 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Ducts
  • Turbomachine blades
  • Gas turbines
  • Cooling
  • Thermal load
  1 Citation (Scopus)

• Finite element analysis of different hip implant designs along with femur under static loading conditions

  Chethan, K. N., Shyamasunder Bhat, N., Zuber, M. & Satish Shenoy, B., 01-10-2019, In: Journal of Biomedical Physics and Engineering. 9, 5, p. 507-516 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Finite Element Analysis
  • Hip Joint
  • Femur
  • Hip
  • Joints
  3 Citations (Scopus)

• FINITE ELEMENT ANALYSIS of URINARY BLADDER WALL THICKNESS at DIFFERENT PRESSURE CONDITION

  Keni, L. G., Kalburgi, S., Hameed, B. M. Z., Zuber, M., Tamagawa, M. & Shenoy, B. S., 01-08-2019, In: Journal of Mechanics in Medicine and Biology. 19, 5, 1950029.

  Research output: Contribution to journal › Article › peer-review

  • Mucous Membrane
  • Pressure gradient
  • Mechanical properties
  1 Citation (Scopus)

• Periprosthetic bone response to axial loading following TKR: Effect of polyethylene thickness and implant material – a finite element analysis study

  Baliga, R., Rao, S. K., Pai, R., Shenoy, S. B., Hegde, A. K., Swaroop, S. & Shetkar, A., 16-10-2019, In: Multidiscipline Modeling in Materials and Structures.

  Research output: Contribution to journal › Article › peer-review

  • Implant
  • Bone
  • Polyethylene
  • Polyethylenes
  • Finite Element

• Review on carbon fiber reinforced polymer (CFRP) and their mechanical performance

  Hegde, S., Satish Shenoy, B. & Chethan, K. N., 01-01-2019, In: Materials Today: Proceedings. 19, p. 658-662 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Carbon Fiber
  • Carbon fibers
  • Polymers
  • Adhesives
  • Silanes
  5 Citations (Scopus)

• Static structural analysis of different stem designs used in total hip arthroplasty using finite element method

  K.N., C., Zuber, M., Bhat N., S., Shenoy B., S. & R. Kini, C., 01-06-2019, In: Heliyon. 5, 6, e01767.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Arthroplasty
  • Structural analysis
  • Cobalt alloys
  • Chromium alloys
  • Finite element method
  7 Citations (Scopus)

• Three dimensional assessment of protraction in craniofacial structures of cleft lip and palate model using Facemask and Maxgym

  Parveen, S., Husain, A., Shenoy, S., Mascarenhas, R., Gosla Reddy, S. & Reddy, M., 01-01-2019, In: Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 553-561 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Three-dimensional
  • Model
  • Computerized tomography
  • Vertex of a graph
  • Large Displacements

• Three-dimensional assessment of transverse displacement with Facemask and Maxgym in unilateral cleft lip and palate model

  Parveen, S., Husain, A., Reddy, S. G., Mascarenhas, R., Shenoy, S. & Reddy, M., 01-04-2019, In: Journal of Indian Society of Pedodontics and Preventive Dentistry. 37, 2, p. 177-184 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Palatal Expansion Technique
  • Cleft Lip
  • Cleft Palate
  • Crowns
  • Bicuspid
• 2020

  A study to compare the stress patterns in the edentulous mandibular bone around the two implant retained over denture and the prosthesis restored with all-on-four concept using the three dimensional finite element analysis

  Hegde, P., Shenoy, S., Rodrigues, S., Shetty, T., Pai, U., Saldhana, S. & Mahesh, M., 01-01-2020, In: Indian Journal of Forensic Medicine and Toxicology. 14, 1, p. 130-133 4 p.

  Research output: Contribution to journal › Article › peer-review

  • Implant-Supported Dental Prosthesis
  • Overlay Denture
  • Dental prostheses
  • Finite Element Analysis
  • Dentures

• A study to compare the stress patterns in the edenulous mandibalur bone around the two implant retained over denture and the prosthesis restored with all-on-four concept using the three dimensional finite element analysis

  Hegde, P., Shenoy, S., Rodrigues, S., Shetty, T., Pai, U., Saldhana, S. & Mahesh, M., 01-01-2020, In: Indian Journal of Forensic Medicine and Toxicology. 14, 1, p. 149-153 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Implant-Supported Dental Prosthesis
  • Overlay Denture
  • Dental prostheses
  • Finite Element Analysis
  • Dentures