Find Research outputs

Search results

• Article

  Analysis of spatio-temporal variability in observed rainfall over Karnataka using different data analytical techniques

  Samanth, A., Rakesh, V., Purwar, S., Gavaskar, S. M., Jagadeesha Pai, B. & Mohapatra, G. N., 06-2022, In: Journal of Earth System Science. 131, 2, 66.

  Research output: Contribution to journal › Article › peer-review

• Analysis of stagnation point flow of an incompressible viscous fluid between porous plates with velocity slip

  Bhat, A. & Katagi, N. N., 01-08-2018, In: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 48, 1, p. 40-52 13 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Analysis of steady viscous flow in slender tubes

  Bujurke, N. M., Katagi, N. N. & Awati, V. B., 01-09-2005, In: Zeitschrift fur Angewandte Mathematik und Physik. 56, 5, p. 836-851 16 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Analysis of Supplementary Protection Certificate (SPC) and Certificate of Supplementary Protection (CSP) Manufacturing Waivers and Their Impact on Pharmaceutical Industry

  Kardile, M., Roy, A. & Janodia, M., 2020, In: NTUT Journal of Intellectual Property Law and Management. 9, 2, p. 37-54 18 p.

  Research output: Contribution to journal › Article › peer-review

• Analysis of surface roughness and hardness in ball burnishing of titanium alloy

  Revankar, G. D., Shetty, R., Rao, S. S. & Gaitonde, V. N., 01-12-2014, In: Measurement: Journal of the International Measurement Confederation. 58, p. 256-268 13 p.

  Research output: Contribution to journal › Article › peer-review
  84 Citations (Scopus)

• Analysis of surface roughness and hardness in titanium alloy machining with polycrystalline diamond tool under different lubricating modes

  Revankar, G. D., Shetty, R., Rao, S. S. & Gaitonde, V. N., 01-01-2014, In: Materials Research. 17, 4, p. 1010-1022 13 p.

  Research output: Contribution to journal › Article › peer-review
  44 Citations (Scopus)

• Analysis of temperature dependent properties of a peristaltic MHD flow in a non-uniform channel: A Casson fluid model

  Divya, B. B., Manjunatha, G., Rajashekhar, C., Vaidya, H. & Prasad, K. V., 06-2021, In: Ain Shams Engineering Journal.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  13 Citations (Scopus)

• Analysis of the arterial anatomical variations of thyroid gland: Anatomic guide for surgical neck dissection

  Ray, B., Pugazhandhi, B., D'Souza, A. S., Saran, S., Fasil, M. & Srinivasa, R. S., 2012, In: Bratislava Medical Journal. 113, 11, p. 669-672 4 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Analysis of the distribution of mucins in adult human gastric mucosa and its functional significance

  Prasanna, L. C., 01-02-2016, In: Journal of Clinical and Diagnostic Research. 10, 2, p. AC01-AC04

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)

• Analysis of the effect of copper concentration on the structural, spectroscopic, and electrical properties of Cu:ZnO thin films

  V S, G. K. & M G, M., 05-04-2022, In: Journal of Alloys and Compounds. 899, 163357.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Analysis of the inhibiting action of pectin on corrosion of AISI1040 dual-phase steel with ferrite–martensite and ferrite–bainite structure: a comparison in 0.5 M sulphuric acid

  Prabhu, D., Sharma, S., Prabhu, P. R., Jomy, J. & Sadanand, R. V., 2021, (Accepted/In press) In: Journal of the Iranian Chemical Society.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• Analysis of the literature on 3D printing in healthcare with reference to pharmaceuticals using a bibliometric approach

  Ligade, V. S. & Chimegave, A., 03-2022, In: Journal of Applied Pharmaceutical Science. 12, 3, p. 96-102 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Analysis of the magnetic field created by permanent magnet rings in permanent magnet bearings

  Bekinal, S. I., Anil, T. R. R. & Jana, S., 2014, In: International Journal of Applied Electromagnetics and Mechanics. 46, 1, p. 255-269 15 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Analysis of the Thermal Characteristics and Energy performance of Electro Chromic Glazing window

  Mathew, V., Kurian, C. P., Augustine, N. & Srinivasan, C. R., 2022, In: International Journal of Mechanics. 16, p. 46-54 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Analysis of the truncation schemes for the physical boson states with Dysons description

  Sheikh, J. A. & Gambhir, Y. K., 1986, In: Physical Review C. 34, 6, p. 2344-2347 4 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)

• Analysis of the WISP3 gene in Indian families with progressive pseudorheumatoid dysplasia

  Dalal, A., Bhavani, S. L., Togarrati, P. P., Bierhals, T., Nandineni, M. R., Danda, S., Danda, D., Shah, H., Vijayan, S., Gowrishankar, K., Phadke, S. R., Bidchol, A. M., Rao, A. P., Nampoothiri, S., Kutsche, K. & Girisha, K. M., 11-2012, In: American Journal of Medical Genetics, Part A. 158 A, 11, p. 2820-2828 9 p.

  Research output: Contribution to journal › Article › peer-review
  51 Citations (Scopus)

• Analysis of third-grade liquid under the influence of wall slip and variable fluid properties in an inclined peristaltic channel

  Choudhari, R., Makinde, O. D., Mebarek-Oudina, F., Vaidya, H., Prasad, K. V. & Devaki, P., 2022, (Accepted/In press) In: Heat Transfer.

  Research output: Contribution to journal › Article › peer-review

• Analysis of time-series method for demand forecasting

  Verma, A., Karan, A., Mathur, A. & Chethan, S., 01-01-2017, In: Journal of Engineering and Applied Sciences. 12, 12, p. 3102-3107 6 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Analysis of trace elements in complex matrices (soil) by Laser Induced Breakdown Spectroscopy (LIBS)

  Unnikrishnan, V. K., Nayak, R., Aithal, K., Kartha, V. B., Santhosh, C., Gupta, G. P. & Suri, B. M., 07-03-2013, In: Analytical Methods. 5, 5, p. 1294-1300 7 p.

  Research output: Contribution to journal › Article › peer-review
  45 Citations (Scopus)

• Analysis of two neutron (proton) transfer reaction data in the Zr-region

  Haq, S. & Gambhir, Y. K., 09-1979, In: Pramana. 13, 3, p. 269-280 12 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Analysis of uroliths (Urinary stones)

  Vinodchandran, Prasannachandra, M., Singh, U. N., Sreekantha, Yogesh, B., Remya, D'souza, V. & D'souza, B., 01-12-2011, In: International Journal of Pharma and Bio Sciences. 2, 2, p. 300-303 4 p.

  Research output: Contribution to journal › Article › peer-review

• Analysis of Verbal Fluency Output on Semantic Categories of 'Food' and 'Vehicle' in Typically Developing Malayalam Speaking Children

  Sunila, J., Rajashekhar, B. & Guddattu, V., 01-09-2018, In: Psychology of Language and Communication. 22, 1, p. 328-353 26 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Analysis of water-lubricated journal bearings with multiple axial grooves

  Majumdar, B. C., Pai, R. & Hargreaves, D. J., 01-01-2004, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 218, 2, p. 135-146 12 p.

  Research output: Contribution to journal › Article › peer-review
  78 Citations (Scopus)

• Analysis of wear and sem characteristics on ferrous composites through powder metallurgy method

  Ramadurai, K., Sathan Raj, V. & Vinoth, R., 31-08-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 4, p. 609-614 6 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Analysis on impact of height criterion on the performance of Vee-Type folded plate cantilever retaining wall

  Anand, V. & Krishnamoorthy, A., 01-01-2017, In: International Journal of Civil Engineering and Technology. 8, 4, p. 422-430 9 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Analysis on magnetocaloric and structural properties of heusler alloys used in magnetic refrigeration

  Sandeep Nambiar, S., Murthy, B. R. N., Sharma, S. & Prasanna, A. A., 08-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 4, p. 29-46 18 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• Analysis on the character design of asian indian cartoon character chhota bheem

  Balaji, A. C. & Lakshmikantha, N., 01-2020, In: Indian Journal of Marketing. 50, 1, p. 9-23 15 p.

  Research output: Contribution to journal › Article › peer-review

• Analysis on the steady state performance of a multi pad externally adjustable fluid film bearing

  Hariharan, G. & Pai, R., 12-08-2019, In: Industrial Lubrication and Tribology. 71, 6, p. 803-809 7 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• Analytical and bioanalytical HPLC method for simultaneous estimation of 5-fluorouracil and sonidegib

  Padya, B. S., Hegde, A. R., Mutalik, S. P., Biswas, S. & Mutalik, S., 01-2022, In: Bioanalysis. 14, 1, p. 29-45 17 p.

  Research output: Contribution to journal › Article › peer-review

• Analytical and experimental investigation to determine the variation of hottel-whillier-bliss constants for a scaled forced circulation flat-plate solar water heater

  Arunachala, U. C., Bhatt, M. S. & Sreepathi, L. K., 01-10-2015, In: Journal of Solar Energy Engineering, Transactions of the ASME. 137, 5, 051011.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Analytical calibre of high performance liquid chromatography and ion exchange chromatography resin methods in estimation of glycated hemoglobin: A comparitive study

  Rukmini, M. S., Ashritha, Nishmitha, P., Yalla, D., Christy, A. & Manjrekar, P., 01-01-2017, In: Biomedical Research (India). 28, 4, p. 1765-1769 5 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Analytical method development and validation for aspirin

  Suresh Kumar, S., Jamadar, L. D., Bhat, K., Musmade, P. B., Vasantharaju, S. G. & Udupa, N., 01-01-2010, In: International Journal of ChemTech Research. 2, 1, p. 389-399 11 p.

  Research output: Contribution to journal › Article › peer-review
  17 Citations (Scopus)

• Analytical method development and validation for dipyridamole

  Suresh Kumar, S., Jamadar, L. D., Bhat, K., Jagdish, P. C., Pathak, S. & Udupa, N., 10-2010, In: Journal of Pharmaceutical Research and Health Care. 2, 4, p. 333-338 6 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Analytical Method Development and Validation for HPLC-ECD Determination of Moxifloxacin in Marketed Formulations

  Phani Sekhar Reddy, G., Navyasree, K. S., Jagadish, P. C. & Bhat, K., 01-10-2018, In: Pharmaceutical Chemistry Journal. 52, 7, p. 674-679 6 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Analytical method development and validation for iron and ascorbic acid in ferrous bisglycinate effervescent tablets by colorimetry and reverse phase-high-performance liquid chromatography

  Srivalli, A., Nalawade, R., Muddukrishna, B. S., Sushmitha, G. S. & Vasantharaju, S. G., 2017, In: Thai Journal of Pharmaceutical Sciences. 41, 1, p. 12-18 7 p.

  Research output: Contribution to journal › Article › peer-review

• Analytical method development and validation of RP-HPLC method for simultaneous estimation of N-acetyl cysteine and cefexime from its fixed dose combination

  Dabir, J., Mathew, E. M. & Moorkoth, S., 01-07-2016, In: Research Journal of Pharmacy and Technology. 9, 7, p. 835-842 8 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Analytical method development using central composite design for estimation of lamotrigine in lipid nanoformulation

  Gangurde, P. K., Bhaskaran, N. A., Verma, R., Jose, J. & Kumar, L., 03-2020, In: Materiale Plastice. 57, 1, p. 223-235 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  4 Citations (Scopus)

• Analytical modelling of spiral cantilever structure for vibration energy harvesting applications

  Augustine, N., Kotturu, H., Sundaram, S. M. & Vijay, G. S., 01-01-2018, In: International Journal of Engineering and Technology(UAE). 7, 2, p. 39-42 4 p.

  Research output: Contribution to journal › Article › peer-review

• Analytical predictive capabilities of Laser Induced Breakdown Spectroscopy (LIBS) with Principal Component Analysis (PCA) for plastic classification

  Unnikrishnan, V. K., Choudhari, K. S., Kulkarni, S. D., Nayak, R., Kartha, V. B. & Santhosh, C., 28-12-2013, In: RSC Advances. 3, 48, p. 25872-25880 9 p.

  Research output: Contribution to journal › Article › peer-review
  106 Citations (Scopus)

• Analytical solution of FHD flow of blood through two layered model in the presence of magnetic field

  Rajashekhar, C., Manjunatha, G. & Basavarajappa, K. S., 01-01-2017, In: Journal of Mechanical Engineering Research and Developments. 40, 2, p. 365-370 6 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Analytical solutions on the flow of blood with the effects of hematocrit, slip and TPMA in a porous tube

  Choudhari, R., Gudekote, M. & Choudhari, N., 01-07-2018, In: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 47, 1, p. 201-208 8 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• Analytical solutions using a higher order refined computational model with 12 degrees of freedom for the free vibration analysis of antisymmetric angle-ply plates

  Swaminathan, K. & Patil, S. S., 01-2008, In: Composite Structures. 82, 2, p. 209-216 8 p.

  Research output: Contribution to journal › Article › peer-review
  58 Citations (Scopus)

• Analytical studies on drop of H-W-B constants due to scaling in natural circulation flat plate solar water heater

  Arunachala, U. C., Sreepathi, L. K. & Siddhartha Bhatt, M., 01-01-2014, In: International Journal of Sustainable Energy. 33, 1, p. 192-202 11 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Analytical study on the effect of copper and nickel in austempered ductile iron using analysis of variance

  Hindi, J., Gurumurthy, B. M., Sharma, S., Gowrishankar, M. C., Jain, N. & Muralidhar, M., 01-08-2018, In: International Journal of Mechanical Engineering and Technology. 9, 8, p. 286-295 10 p.

  Research output: Contribution to journal › Article › peer-review

• Analytical validation strategies for dbs biomarker assays

  Mathew, E. M., Rao, P., Shetty, R., Lewis, L. & Moorkoth, S., 01-08-2019, In: Research Journal of Pharmacy and Technology. 12, 8, p. 4031-4038 8 p.

  Research output: Contribution to journal › Article › peer-review

• Analytic continuation of series solution representing flow between plates

  Bujurke, N. M., Pai, N. P., Katagi, N. N. & Awati, V. B., 01-05-2004, In: Indian Journal of Pure and Applied Mathematics. 35, 5, p. 587-598 12 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Analyzing human emotion from facial expression based on Eigen face approach

  Joy, R. C., Sagayam, K. M., Rajan, A. A., Andrew, J. & Ho, C. C., 01-2020, In: International Journal of Scientific and Technology Research. 9, 1, p. 3247-3250 4 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Analyzing the Factors Contributing to Bacterial Contamination of Domestic Water Sources in Estuarine Islands of Coastal Karnataka, India

  Das, S., Rama Devi, N., Shetty, S., Kapur, R., H N, U. S. & Nair, S., 2022, In: Air, Soil and Water Research. 15

  Research output: Contribution to journal › Article › peer-review

  Open Access

• An amended RSA algorithm for secure communication

  Shetty, N. P., 01-01-2017, In: Journal of Engineering and Applied Sciences. 12, Specialissue2, p. 6189-6194 6 p.

  Research output: Contribution to journal › Article › peer-review

• An analysis of angular-momentum-projected Hartree-Fock-Bogoliubov wave functions in terms of interacting bosons

  Pannert, W., Ring, P. & Gambhir, Y. K., 30-09-1985, In: Nuclear Physics, Section A. 443, 2, p. 189-209 21 p.

  Research output: Contribution to journal › Article › peer-review
  31 Citations (Scopus)