Find Research outputs

Search results

• Design, synthesis and nonlinear optical characterization of novel mixed ligand ruthenium metal-organic complex

  Manjunatha, K. B., Ramakrishna, D., Rudresha, B. J., Antony, A. & Poornesh, P., 09-2020, In: Optical Materials. 107, 110068.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Design, usage and review of a cost effective and innovative face shield in a tertiary care teaching hospital during COVID-19 pandemic

  Chaturvedi, S., Gupta, A., Krishnan S, V. & Bhat, A. K., 01-09-2020, In: Journal of Orthopaedics. 21, p. 331-336 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  10 Citations (Scopus)

• Design & analysis of dead-time compensators for self-regulating & non-self regulating processes with dead time using auto-tuning

  Saravanakumar, G., Nayak, C. G., Thirunavukkarasu, I. & Wahidabanu, R. S. D., 01-12-2007, 2007 International Conference on Intelligent and Advanced Systems, ICIAS 2007. p. 1036-1041 6 p. 4658542

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design analysis and implementation of MPPT using PSIM

  Shivrudraswamy, R., Shukla, A. N. & Chandrakala, C. B., 01-01-2018, Advances in Smart Grid and Renewable Energy - Proceedings of ETAEERE-2016. Springer Verlag, p. 157-166 10 p. (Lecture Notes in Electrical Engineering; vol. 435).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Design and Analysis of an Iterative Carry Save Adder-based Power-Efficient Multiplier

  Mendez, T. & Nayak, S. G., 03-2022, In: Iranian Journal of Electrical and Electronic Engineering. 18, 1, 2238.

  Research output: Contribution to journal › Article › peer-review

• Design and analysis of antennas for a nano-Satellite

  Sadasivan, K. S., Shalini, S. N., Cheela, B. S. & Annavarapu, N., 07-06-2017, 2017 IEEE Aerospace Conference. IEEE Computer Society, 7943809

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Design and Analysis of a Passive Tether De-Orbiting Mechanism for a Nano-Satellite

  Gupta, A., Thakurta, V., Sahoo, D. & Kailaje, A., 01-03-2019, 2019 IEEE Aerospace Conference, AERO 2019. IEEE Computer Society, 8742241. (IEEE Aerospace Conference Proceedings; vol. 2019-March).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Design and Analysis of Booth Multiplier with Optimised Power Delay Product

  Chaitanya, C. V. S. & Kumar, P., 20-08-2018, 2018 International Conference on Computer Communication and Informatics, ICCCI 2018. Institute of Electrical and Electronics Engineers Inc., 8441236. (2018 International Conference on Computer Communication and Informatics, ICCCI 2018).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Design and analysis of cross-fed rectangular array antenna; An X-band microstrip array antenna, operating at 11 GHz

  Varghese, N. M., Vincent, S. & Kumar, O. P., 02-11-2016, 2016 International Conference on Advances in Computing, Communications and Informatics, ICACCI 2016. Institute of Electrical and Electronics Engineers Inc., p. 1261-1265 5 p. 7732219

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  10 Citations (Scopus)

• Design and Analysis of Diffuser Casings for Diffuser Augmented Wind Turbines

  Surya, S., Gaonkar, A. A. & Jayakrishnan, R., 03-2020, Proceedings of 2020 4th International Conference on Green Energy and Applications, ICGEA 2020. Institute of Electrical and Electronics Engineers Inc., p. 28-31 4 p. 9077553. (Proceedings of 2020 4th International Conference on Green Energy and Applications, ICGEA 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Design and analysis of dual output flyback converter for standalone PV/battery system

  Jayalaksmi, N. S., Gaonkar, D. N. & Naik, A., 01-01-2017, In: International Journal of Renewable Energy Research. 7, 3, p. 1032-1040 9 p.

  Research output: Contribution to journal › Article › peer-review
  15 Citations (Scopus)

• Design and analysis of fractal microstrip low pass filter with open circuited stubs

  Kumar, P., Jagdeesh Chandra, R. B., Baral, R. N. & Singhal, P. K., 2008, Proceedings of the 2008 International Conference on Computing, Communication and Networking, ICCCN 2008. 4787713

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Design and analysis of hybrid electric multi-lobed airship for cargo transportation

  Manikandan, M., Vaidya, E. & Pant, R. S., 06-2022, In: Sustainable Energy Technologies and Assessments. 51, 101892.

  Research output: Contribution to journal › Article › peer-review

• Design and analysis of LED based high mast lighting systems

  Olikkathodi, M. H. & Kini, S. G., 01-08-2013, In: International Journal of Simulation: Systems, Science and Technology. 14, 4, p. 1-9 9 p.

  Research output: Contribution to journal › Article › peer-review

• Design and Analysis of LIM Hybrid MTJ/CMOS Logic Gates

  Barla, P., Shet, D., Joshi, V. K. & Bhat, S., 03-2020, ICDCS 2020 - 2020 5th International Conference on Devices, Circuits and Systems. Institute of Electrical and Electronics Engineers Inc., p. 41-45 5 p. 9075774. (ICDCS 2020 - 2020 5th International Conference on Devices, Circuits and Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Citations (Scopus)

• Design and analysis of microstrip elliptical low pass filter

  Kumar, P. & Chaturvedi, A., 2009, 2009 International Conference on Emerging Trends in Electronic and Photonic Devices and Systems, ELECTRO '09. p. 340-342 3 p. 5441101

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• DESIGN AND ANALYSIS OF MULTIPLE ANTENNA STRUCTURES FOR ULTRAWIDE BANDWIDTH

  Kumar, P., Pai, M. M. M. & Ali, T., 2021, In: Telecommunications and Radio Engineering (English translation of Elektrosvyaz and Radiotekhnika). 80, 6, p. 41-53 13 p.

  Research output: Contribution to journal › Article › peer-review

• Design and Analysis of Performance Characteristics of Electronic Ballast Used for Fluorescent Lamp

  Lokesh, J., Khemka, A. & Sharma, P., 01-01-2018, Advances in Systems, Control and Automation - ETAEERE-2016. Springer Verlag, p. 251-257 7 p. (Lecture Notes in Electrical Engineering; vol. 442).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and analysis of robust controllers

  George, V. I. & Kurian, C. P., 2003, Nonlinear Dynamics and Control. Institute of Electrical and Electronics Engineers Inc., Vol. 4. p. 1320-1325 6 p. 1237099

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and Analysis of RTOS and Interrupt Based Data Handling System for Nanosatellites

  Akhoury, A., Birla, K., Sarkar, R., Ravi, A., Kalsi, S. & Ghorai, S., 01-03-2019, 2019 IEEE Aerospace Conference, AERO 2019. IEEE Computer Society, 8742184. (IEEE Aerospace Conference Proceedings; vol. 2019-March).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Design and Analysis of Self-write-Terminated Hybrid STT-MTJ/CMOS Logic Gates using LIM Architecture

  Barla, P., Joshi, V. K. & Bhat, S., 2021, 2021 IEEE International Conference on Distributed Computing, VLSI, Electrical Circuits and Robotics, DISCOVER 2021 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 199-204 6 p. (2021 IEEE International Conference on Distributed Computing, VLSI, Electrical Circuits and Robotics, DISCOVER 2021 - Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and analysis of SHE-assisted STT MTJ/CMOS logic gates

  Barla, P., Joshi, V. K. & Bhat, S., 01-10-2021, In: Journal of Computational Electronics.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  4 Citations (Scopus)

• Design and Analysis of Split Fixture for Gear Hobbing Machine

  Shenoy, P., Nithesh, N., Shettar, M., Debarghya & Abbas, W., 09-01-2018, In: MATEC Web of Conferences. 144, 01014.

  Research output: Contribution to journal › Conference article › peer-review

• Design and analysis of super wideband antenna for microwave applications

  Balani, W., Sarvagya, M., Samasgikar, A., Ali, T. & Kumar, P., 02-01-2021, In: Sensors (Switzerland). 21, 2, p. 1-29 29 p., 477.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  15 Citations (Scopus)

• Design and analysis of three-axis cantilever type force sensor

  Jawale, H. P., Jaiswal, A. & Bhasme, K. N., 20-08-2019, In: World Journal of Engineering. 16, 4, p. 497-508 12 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Design and Analysis of Two Novel Metamaterial Unit Cell for Antenna Engineering

  Ali, T., Subhash, B. K. & Biradar, R. C., 02-10-2018, Proceedings of 2018 2nd International Conference on Advances in Electronics, Computers and Communications, ICAECC 2018. Institute of Electrical and Electronics Engineers Inc., 8479435. (Proceedings of 2018 2nd International Conference on Advances in Electronics, Computers and Communications, ICAECC 2018).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Design and analysis of two throat wind tunnel

  Shiva Prasad, U., Ramamohan Pai, B., Pai, Y., Govardhan, D. & Praveen, B., 01-08-2017, In: International Journal of Mechanical and Production Engineering Research and Development. 7, 4, p. 381-388 8 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Design and analysis of UGV with rocker bogie mechanism for landmine extraction

  Naik, N., Suhas Kowshik, C. S., Shetty, D. K., Gopakumar, R. & Malarout, N., 01-01-2019, In: International Journal of Mechanical Engineering and Technology. 10, 1, p. 1731-1744 14 p.

  Research output: Contribution to journal › Article › peer-review

• Design and analysis of vibration isolation pad of a heavy load machine and to perform the progressive rate frequency analysis

  Krishnamoorthy, A. & Jayavel, M., 01-08-2017, In: ARPN Journal of Engineering and Applied Sciences. 12, 16, p. 4709-4716 8 p.

  Research output: Contribution to journal › Article › peer-review

• Design and antimicrobial activity of piperazine polymer nanocomposite

  Jalageri, M. D., Puttaiahgowda, Y. M. & Hariprasad, 2019, In: Materials Today: Proceedings. 15, p. 262-267 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  5 Citations (Scopus)

• Design and Characterization of Maltose-Conjugated Polycaprolactone Nanofibrous Scaffolds for Uterine Tissue Engineering

  Hanuman, S. & Nune, M., 2021, (Accepted/In press) In: Regenerative Engineering and Translational Medicine.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and characterization of nanoparticulate drug delivery system containing the antiviral drug stavudine

  Goudanavar, P., Krishna, T., Hiremath, D. & Udupi, R., 01-12-2012, In: Latin American Journal of Pharmacy. 31, 10, p. 1518-1522 5 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Design and characterization of valsartan Co-crystals to improve its aqueous solubility and dissolution behavior

  Thomas, J. E., Nayak, U. Y., Jagadish, P. C. & Koteshwara, K. B., 2017, In: Research Journal of Pharmacy and Technology. 10, 1, p. 26-30 5 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)

• Design and construction of arduino-hacked variable gating distortion pedal

  Murthy, A. A., Rao, N., Beemaiah, Y. R., Shandilya, S. D. & Siddegowda, R. B., 01-01-2014, In: IEEE Access. 2, p. 1409-1417 9 p., 6965623.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Design and Development of 3-DoF Mechanism for the Exoskeleton Hip Joint

  Akhil, V. M., Varghese, J., Rajendrakumar, P. K. & Sivanandan, K. S., 2021, Advances in Systems Engineering - Select Proceedings of NSC 2019. Saran, V. H. & Misra, R. K. (eds.). Springer Science and Business Media Deutschland GmbH, p. 199-211 13 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and development of a desktop monitoring system

  Santhalia, V. K. & Singh, S., 12-12-2012, Proceedings of the 2nd International Conference on Computational Science, Engineering and Information, CCSEIT 2012. p. 620-625 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and development of a model free robust controller for active control of dominant flexural modes of vibrations in a smart system

  Parameswaran, A. P., Ananthakrishnan, B. & Gangadharan, K. V., 27-10-2015, In: Journal of Sound and Vibration. 355, p. 1-18 18 p.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)

• Design and development of an oil preheating system to study the performance of a diesel engine

  Nayak, R., Indrajith & Kini, C. R., 01-11-2017, In: ARPN Journal of Engineering and Applied Sciences. 12, 21, p. 5955-5959 5 p.

  Research output: Contribution to journal › Article › peer-review

• Design and development of a novel triphibian quadcopter

  Prajwal Shenoy, T., Praveen Shenoy, K., Khan, L., Aziz, S., Afran, S. & Kumar, K., 01-01-2018, In: International Journal of Engineering and Technology(UAE). 7, 2, p. 1-4 4 p.

  Research output: Contribution to journal › Article › peer-review

• Design and development of a photoacoustic set up for breath analysis: A preliminary study

  Nidheesh, V. R., Mohapatra, A. K., Unnikrishnan, V. K., Sinha, R. K., Kartha, V. B. & Chidangil, S., 2021, European Conferences on Biomedical Optics, ECBO 2021. The Optical Society, EM1A.30. (Optics InfoBase Conference Papers).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and development of energy efficient retrofit LED fixture for solar powered home lighting system

  Kini, S. G., 2011, Proceedings - 2011 Annual IEEE India Conference: Engineering Sustainable Solutions, INDICON-2011. 6139599

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Design and development of iot-based low-cost robust home security system

  Das, S., Budia, M., Ghosh, R., Dhar, S. & Mruthyunjaya, H. S., 2020, Advances in Communication, Devices and Networking - Proceedings of ICCDN 2019. Bera, R., Pradhan, P. C., Dhar, S., Sur, S. N. & Liu, C-M. (eds.). Springer Gabler, p. 453-461 9 p. (Lecture Notes in Electrical Engineering; vol. 662).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and development of multiparticulate drug delivery of metronidazole for targeted delivery to colon

  Koteshwara, K. B., Thoppil, S. C. & Naha, A., 2011, In: International Journal of Pharmacy and Technology. 3, 4, p. 3580-3589 10 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Design and development of naringin-loaded proposomal gel for wound healing

  Kumari, S. D., Chevala, N. T., Jitta, S. R., Kumar, L., Verma, R. & Jose, J., 2022, (Accepted/In press) In: Journal of Cosmetic Dermatology.

  Research output: Contribution to journal › Article › peer-review

• Design and development of novel semi active eddy current damper for aerospace applications

  Sanjay, H. R., Gulati, S. C., Naik, N. & Suhas Kowshik, C. S., 01-08-2019, In: International Journal of Innovative Technology and Exploring Engineering. 8, 10, p. 1589-1592 4 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Design and Development of Single & Dual Resonant Frequency Antennas for Moisture Content Measurement

  Kumar, P. & Chaturvedi, A., 01-09-2020, In: Wireless Personal Communications.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Design and development of smartphone-based imaging platform using electroluminescence illumination

  Banik, S., Melanthota, S. K., Dutta, S. & Mazumder, N., 05-2021, In: Results in Optics. 3, 100070.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and development of surface modified epigallocatechin 3-gallate NanoCubogel for localized delivery to oral submucous fibrosis therapy

  Mehta, C. H., Narayan, R., Acharya, S. & Nayak, U. Y., 12-2021, In: Journal of Drug Delivery Science and Technology. 66, 102911.

  Research output: Contribution to journal › Article › peer-review

• Design and development of the medFit app: A mobile application for cardiovascular disease rehabilitation

  Prabhu, G., Kuklyte, J., Gualano, L., Venkataraman, K., Ahmadi, A., Duff, O., Walsh, D., Woods, C., O’Connor, N. E. & Moran, K., 2018, Wireless Mobile Communication and Healthcare - 7th International Conference, MobiHealth 2017, Proceedings. Rahmani, A. M., TaheriNejad, N. & Perego, P. (eds.). Springer Verlag, p. 20-28 9 p. (Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering, LNICST; vol. 247).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Design and development of thiolated graphene oxide nanosheets for brain tumor targeting

  Nikam, A. N., More, M. P., Pandey, A. P., Patil, P. O., Patil, A. G. & Deshmukh, P. K., 02-07-2019, In: International Journal of Polymeric Materials and Polymeric Biomaterials.

  Research output: Contribution to journal › Article › peer-review
  13 Citations (Scopus)