Find Research outputs

Search results

• Article

  Characteristic study and comparison of different hardening methods on low-alloy medium-carbon spring steel

  Mehta, D. B., Sharma, S. S., Gurumurthy, B. M., Kishan Bairy, S., Dsouza, E. J. & Mendonca, A. P., 01-03-2016, In: International Journal of Applied Engineering Research. 11, 2, p. 1542-1547 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Hardening
  • Carbon
  • Steel
  • Heat treatment
  • Phase composition

• Influence of artificial aging on the stir cast Al6061-SiC metal matrix composites under different aging conditions

  Shankar, G., Sharma, S. S., Kini, A., Praksh, S. & Gurumurthy, 01-01-2016, In: International Journal of Technology. 7, 6, p. 1000-1008 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Wear Resistance
  • Matrix
  • Metals
  • Aging of materials
  • Hardness
  6 Citations (Scopus)

• Microstructure and fracture behaviour of two stage stir cast Al6061-SiC composites

  Gowri Shankar, M. C., Sharma, S. S., Achutha Kini, U., Hiremath, P. & Gurumurthy, 01-01-2017, In: Journal of Materials and Environmental Science. 8, 1, p. 257-263 7 p.

  Research output: Contribution to journal › Article › peer-review

  • microstructure
  • Microstructure
  • rupture
  • Composite materials
  • mechanical property
  5 Citations (Scopus)

• Potentiality of artificially aged aluminium 6061 hybrid composites reinforced with granite and graphite micro–fillers for structural applications: Potenzial von künstlich gealterten, mit Granit und Graphit verstärkten Aluminium- (6061) Hybrid-Verbundwerkstoffen für konstruktive Anwendungen

  Sharma, S. S., Pai, A. & Gowrishankar, M. C., 01-12-2017, In: Materialwissenschaft und Werkstofftechnik. 48, 11, p. 1082-1092 11 p.

  Research output: Contribution to journal › Article › peer-review

  • granite
  • hybrid composites
  • Graphite
  • Granite
  • Aluminum

• Study of Mechanical Properties of Dual Phase EN19 Steel (AISI4140)

  Gurumurthy, Sharma, S. S., Gowrishankar, Sowmith, Abhishek & Devar, A., 01-10-2016, In: Indian Journal of Science and Technology. 9, 37, 97422.

  Research output: Contribution to journal › Article › peer-review

  • Dual phase steel
  • Heat treatment
  • Hardness
  • Mechanical properties
  • Wear resistance
  2 Citations (Scopus)

• Study of wear behavior and mechanical mixed layer on artificial aged Al6061 composite reinforced with B₄C particles

  Shankar, G., Sharma, S. S., Kini, A., Jayashree, P. K. & Gurumurthy, B. M., 01-03-2016, In: Indian Journal of Science and Technology. 9, 12, 88073.

  Research output: Contribution to journal › Article › peer-review

  • composite materials
  • hardness
  • precipitates
  • iron
  • boron carbides
  4 Citations (Scopus)

• Study on dual-phase structure of AISI4140 steel

  Gurumurthy, B. M., Sharma, S. S., Shankar, M. C. G., Walia, R. & Agarwal, T., 01-09-2016, In: Indian Journal of Science and Technology. 9, 33, 93526.

  Research output: Contribution to journal › Article › peer-review

  • steels
  • normalizing
  • pretreatment
  • impact resistance
  • bainite
  2 Citations (Scopus)

• Study on Mechanical Characteristics of Nanoclay Reinforced Polymer Composites

  Shettar, M., Achutha Kini, U., Sharma, S. S. & Hiremath, P., 01-01-2017, In: Materials Today: Proceedings. 4, 10, p. 11158-11162 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Polymers
  • Polyesters
  • Tensile strength
  • Hardness
  • Resins
  16 Citations (Scopus)
• Conference article

  Surface Improvement of Shafts by Turn-Assisted Deep Cold Rolling Process

  Prabhu, R., Sharma, S. S., Jagannath, K., Kumar, K. & Kulkarni, S. M., 03-10-2016, In: MATEC Web of Conferences. 77, 10006.

  Research output: Contribution to journal › Conference article › peer-review

  • Cold rolling
  • Steel
  • Residual stresses
  • Compressive stress
  • X ray diffraction
  2 Citations (Scopus)
• Conference contribution

  Effect of artificial aging on fracture behavior of Al6061-Silica (SiO₂) composites

  Jagannath, K., Sharma, S. S., Prabhu, P. R., Gowri Shankar, S. M. C. & Harisha, S. R., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 59-62 4 p. (Materials Science Forum; vol. 880).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Silicon Dioxide
  • Silica
  • Aging of materials
  • silicon dioxide
  • composite materials
  1 Citation (Scopus)

• Effect of homogenizing and age hardening on mechanical property enhancement of TIG welded Al6061 SIC_p composites

  Jayashree, P. K., Sharma, S. S. & Shetty, R., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 89-93 5 p. (Materials Science Forum; vol. 909 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Noble Gases
  • Tungsten
  • Age hardening
  • Inert gases
  • precipitation hardening

• Ferrite-martensite dual phase treatment of AISI 1040 steel and mechanical characterization

  Gurumurthy, B. M., Sharma, S. S. & Kini, A. U., 01-01-2017, Advanced Materials and Engineering Materials VI - 6th ICAMEM. Trans Tech Publications Ltd, p. 280-283 4 p. (Key Engineering Materials; vol. 748 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Martensite
  • Steel
  • Ferrite
  • Tempering
  • Impact resistance
  2 Citations (Scopus)

• FRP-Nanoclay hybrid composites: A review

  Shettar, M., Kini, A., Sharma, S. & Hiremath, P., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 146-150 5 p. (Materials Science Forum; vol. 904 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • hybrid composites
  • mechanical properties
  • Mechanical properties
  • Composite materials
  • Nanocomposites
  10 Citations (Scopus)

• Influence of spheroidizing heat treatment on mechanical properties of EN47 steel

  Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 136-139 4 p. (Materials Science Forum; vol. 880).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Steel
  • Heat treatment
  • heat treatment
  • Hardness
  • Tempering
  5 Citations (Scopus)

• Investigation on effect of nano-fillers on mechanical properties of epoxy based composites using ANOVA

  Shettar, M., Hiremath, P., Kini, A. & Sharma, S., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 137-141 5 p. (Materials Science Forum; vol. 904 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Analysis of variance (ANOVA)
  • fillers
  • Fillers
  • mechanical properties
  • Mechanical properties
  3 Citations (Scopus)

• Metallography & bulk hardness of artificially aged Al6061-B₄C-SiC stir cast hybrid composites

  Sharma, S. S., Jagannath, K., Prabhu, P. R., Gowri, S., Harisha, S. R. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 140-143 4 p. (Materials Science Forum; vol. 880).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • hybrid composites
  • Metallography
  • metallography
  • casts
  • Hardness
  5 Citations (Scopus)

• Process optimization on hardness of precipitation hardened Al6061 alloy using design of experiments

  Shankar, G., Achutha Kini, U. & Sharma, S. S., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 27-32 6 p. (Materials Science Forum; vol. 909 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • experiment design
  • Design of experiments
  • Age hardening
  • Aging of materials
  • Hardness

• Spheroidize annealing and mechanical property evaluation of AISI 1040 steel

  Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 3-8 6 p. (Materials Science Forum; vol. 909 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • carbon steels
  • Steel
  • Annealing
  • Carbon steel
  • steels
  1 Citation (Scopus)
• Review article

  A review on finite element method for machining of composite materials

  Shetty, N., Shahabaz, S. M., Sharma, S. S. & Divakara Shetty, S., 15-09-2017, In: Composite Structures. 176, p. 790-802 13 p.

  Research output: Contribution to journal › Review article › peer-review

  • Drilling
  • Machining
  • Finite element method
  • Composite materials
  • Delamination
  45 Citations (Scopus)