Find Research outputs

Search results

• Article

  A comprehensive study of glass fibre reinforced polymer (GFRP) drilling

  Mohan, N., Sharma, S. & Bhat, R., 01-02-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 1, p. 1-10 10 p.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Glass fibers
  • Polymers
  • Drilling
  • Machining
  5 Citations (Scopus)

• Aging kinetics and microstructural features of Al6061-SiC+B₄C stir cast hybrid composites

  Sathyashankarasharma, Gurumurthy, Gowrishankar, Kini, A., Shettar, M. & Hiremath, P., 31-12-2019, In: International Journal of Automotive and Mechanical Engineering. 16, 4, p. 7211-7224 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Aging of materials
  • Composite materials
  • Intermetallics
  • Reinforcement
  • Hardness
  3 Citations (Scopus)

• Analytical study on the effect of copper and nickel in austempered ductile iron using analysis of variance

  Hindi, J., Gurumurthy, B. M., Sharma, S., Gowrishankar, M. C., Jain, N. & Muralidhar, M., 01-08-2018, In: International Journal of Mechanical Engineering and Technology. 9, 8, p. 286-295 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Iron analysis
  • Nodular iron
  • Analysis of variance (ANOVA)
  • Nickel
  • Copper

• Behavioral study of mechanical properties of glass fiber-epoxy composites under moisture absorption

  Kini, U. A., Shettar, M., Sharma, S. & Hiremath, P., 01-07-2018, In: International Journal of Mechanical Engineering and Technology. 9, 7, p. 1-5 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Glass fibers
  • Moisture
  • Bending strength
  • Mechanical properties
  • Tensile strength
  5 Citations (Scopus)

• Characteristic study and comparison of different hardening methods on low-alloy medium-carbon spring steel

  Mehta, D. B., Sharma, S. S., Gurumurthy, B. M., Kishan Bairy, S., Dsouza, E. J. & Mendonca, A. P., 01-03-2016, In: International Journal of Applied Engineering Research. 11, 2, p. 1542-1547 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Hardening
  • Carbon
  • Steel
  • Heat treatment
  • Phase composition

• Comparison of machinability of manganese alloyed austempered ductile iron produced using conventional and two step austempering processes

  Hegde, A. & Sharma, S., 01-05-2018, In: Materials Research Express. 5, 5, 056519.

  Research output: Contribution to journal › Article › peer-review

  • Nodular iron
  • Manganese
  • Machinability
  • Hardness
  • Toughness
  2 Citations (Scopus)

• Effect of carburization on microstructure of low carbon steel and the influence of process parameters on its tribological behavior

  Hiremath, P., Sharma, S., Gowrishankar, M. C., Shettar, M., Kowshik, C. S. S. & Naik, N., 01-06-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 718-725 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Low carbon steel
  • Microstructure
  • Wear of materials
  • Case hardening
  1 Citation (Scopus)

• Effect of heat treatment and mechanical characterization of AISI 4140 steel

  Bhagyalaxmi, Sharma, S. & Kini, V., 29-11-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 6, p. 603-610 8 p., IJMPERDDEC201863.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Characterization (materials science)
  • Heat treatment
  • Tensile strength
  • Hardness
  3 Citations (Scopus)

• Effect of hygrothermal aging on the mechanical properties of nanoclay-glass fiber-epoxy composite and optimization using full factorial design

  Kini, U. A., Shettar, M., Sharma, S., Hiremath, P., Gowrishankar, M. C., Hegde, A. & Siddhartha, D., 20-03-2019, In: Materials Research Express. 6, 6, 065311.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Glass fibers
  • Aging of materials
  • Mechanical properties
  • Bending strength
  9 Citations (Scopus)

• Effect of post welded heat treatment on tungsten inert gas welded Al6061-SiC composites

  Jayashree, P. K., Sharma, S. S. & Shetty, R., 01-07-2018, In: International Journal of Mechanical Engineering and Robotics Research. 7, 4, p. 331-337 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Inert gases
  • Tungsten
  • Silicon carbide
  • Heat treatment

• Effect of precipitation hardening on stir cast AL6061-B₄C reinforced composite

  Gowri Shankar, M. C., Jayashree, P. K., Sharma, S. & Kini, A., 01-01-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 5, p. 459-466 8 p., IJMPERDOCT201851.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Aging of materials
  • Composite materials
  • Tensile strength
  • Hardness

• Effect of preheat treatment structure on mechanical characterization of AISI 4340 ferrite bainite dual phase steel

  Gurumurthy, B. M., Sharma, S. S., Kini, A. & Mansoor, S. I., 01-08-2018, In: International Journal of Mechanical Engineering and Technology. 9, 8, p. 84-89 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Dual phase steel
  • Bainite
  • Ferrite
  • Ductility
  • Salts
  3 Citations (Scopus)

• Enhancement in Hardness and Influence of Artificial Aging on Stir Cast Al6061-B₄C and Al6061-SiC Composites

  Gowri Shankar, M. C., Shettar, M., Sharma, S. S., Kini, A. & Jayashree, 01-01-2018, In: Materials Today: Proceedings. 5, 1, p. 2435-2443 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Aging of materials
  • Hardness
  • Composite materials
  • Age hardening
  • Alloying elements
  4 Citations (Scopus)

• Experimental investigation on the tensile and flexural strength of nano-polymer composites

  Shettar, M., Kini, U. A., Sharma, S. & Hiremath, P., 01-09-2019, In: International Journal of Mechanical Engineering and Robotics Research. 8, 5, p. 702-707 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Bending strength
  • Tensile strength
  • Polymers
  • Glass fibers
  • Composite materials

• Influence of artificial aging on the stir cast Al6061-SiC metal matrix composites under different aging conditions

  Shankar, G., Sharma, S. S., Kini, A., Praksh, S. & Gurumurthy, 01-01-2016, In: International Journal of Technology. 7, 6, p. 1000-1008 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Wear Resistance
  • Matrix
  • Metals
  • Aging of materials
  • Hardness
  6 Citations (Scopus)

• Influence of austenite and ferrite stabilizers on the microstructure and related mechanical properties of carburized steels

  Sharma, S., Hiremath, P., Gowrishankar, M. C. & Shettar, M., 01-01-2019, In: International Journal of Mechanical Engineering and Technology. 10, 1, p. 1235-1245 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Austenite
  • Ferrite
  • Microstructure
  • Mechanical properties
  • Steel
  4 Citations (Scopus)

• Influence of coconut shell powder carburizing medium and sodium carbonate energizer on carbon diffusion and hardness of pack carburized steels

  Hiremath, P., Sharma, S., Gowrishankar, M. C., Shettar, M. & Seregar, J., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 677-685 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • sodium carbonate
  • Sodium Carbonate
  • Carburizing
  • Steel
  • Powders
  1 Citation (Scopus)

• Influence of solutionising and aging treatments on mechanical behavior of Stir-Cast eutectoid steel powder reinforced Al 7075 metal matrix composites

  Rajesh, Sharma, S. & Gowrishankar, M. C., 01-01-2018, In: International Journal of Automotive and Mechanical Engineering. 15, 3, p. 5583-5591 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Carbon steel
  • Powders
  • Aging of materials
  • Composite materials
  • Tensile strength
  5 Citations (Scopus)

• Interactive study on phase morphology and mechanical characteristics of diffusion annealed and age hardened Al7075-steel powder reinforced metal matrix composites

  Bhat, R., Sharma, S., Gowrishankar, M. C., Shettar, M., Kartik, B. M. & Kenny, V., 01-01-2019, In: Materials Research Express. 6, 1, 016508.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Age hardening
  • Powders
  • Carbon steel
  • Metals
  1 Citation (Scopus)

• Investigation and optimization of thermal shock effects on the properties and microstructure of Nanoclay-Glass Fiber Reinforced Epoxy Composites

  Shettar, M., Achutha Kini, U., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 11-09-2019, In: Materials Research Express. 6, 10, 105360.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Thermal shock
  • Glass fibers
  • Microstructure
  • Composite materials
  2 Citations (Scopus)

• Investigation on effect of cold soaking on the properties of nanoclay-GFRP composite

  Kini, U. A., Shettar, M., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 01-01-2019, In: Materials Research Express. 6, 1, 015206.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Glass fibers
  • Polymers
  • Bending strength
  • Tensile strength
  8 Citations (Scopus)

• Machinability and related properties of austempered ductile iron: A review

  Hegde, A., Sharma, S. & Gowri Shankar, M. C., 01-12-2018, In: Journal of Mechanical Engineering and Sciences. 12, p. 4180-4190 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Nodular iron
  • Machinability
  • Wear resistance
  • Mechanical properties
  • Graphite
  2 Citations (Scopus)

• Machinability study of manganese alloyed austempered ductile iron

  Hegde, A. & Sharma, S., 01-07-2018, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 40, 7, 338.

  Research output: Contribution to journal › Article › peer-review

  • Nodular iron
  • Machinability
  • Manganese
  • Surface roughness
  • Machining

• Mechanical characteristics evaluation of dual phase and related hardening techniques on AISI 4340 steel

  Gurumurthy, B. M., Sharma, S., Achutha Kini, U., Hegde, A. & Patil, A., 01-12-2018, In: Journal of Mechanical Engineering and Sciences. 12, p. 4018-4029 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Hardening
  • Ferrite
  • Steel
  • Bainite
  • Martensite
  5 Citations (Scopus)

• Mechanical characterization and microstructural analysis of AISI 4340 ferrite-martensite dual phase steel

  Gurumurthy, B. M., Sharma, S., Ramakrishna Vikas, S. & Achutha Kini, U., 01-01-2019, In: International Journal of Mechanical Engineering and Robotics Research. 8, 4, p. 553-558 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Dual phase steel
  • Martensite
  • Ferrite
  • Toughness
  • Tensile strength

• Mechanical characterization and optimization of heat treatment parameters of manganese alloyed austempered ductile iron

  Hegde, A., Sharma, S. & Sadanand, R. V., 01-03-2019, In: Journal of Mechanical Engineering and Sciences. 13, 1, p. 4356-4367 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Nodular iron
  • Manganese
  • Characterization (materials science)
  • Heat treatment
  • Hardness
  1 Citation (Scopus)

• Mechanical characterization of deformed and heat treated copper-eutectoid steel powder reinforced composites

  Gowri Shankar, M. C., Sharma, S., Karthik, B. M., Pinjar, A. D., Jose, N. & Shriyan, H. C., 01-01-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 6, p. 289-302 14 p.

  Research output: Contribution to journal › Article › peer-review

  • Powders
  • Copper
  • Carbon steel
  • Reinforcement
  • Composite materials

• Mechanical characterization of heat treated Al2219 hybrid composites

  Gowrishankar, M. C., Sharma, S., Pavan, B. K., Kiran, K., Rajendra, K., Hiremath, P. & Shettar, M., 01-03-2019, In: Journal of Mechanical Engineering and Sciences. 13, 1, p. 4380-4389 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Characterization (materials science)
  • Composite materials
  • Hot Temperature
  • Impact resistance
  • Tensile strength

• Mechanical properties-morphology corroboration of spheroidized AISI1040 steel

  Harisha, S. R., Sharma, S., Kini, U. A., Sharma, A. & Joshi, N., 14-06-2019, In: Materials Research Express. 6, 8, 0865G8.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Heat treatment
  • Mechanical properties
  • Machinability
  • Annealing

• Mechanical testing and microstructure characterization of glass fiber reinforced isophthalic polyester composites

  Bhat, R., Mohan, N., Sharma, S., Pratap, A., Keni, A. P. & Sodani, D., 01-07-2019, In: Journal of Materials Research and Technology. 8, 4, p. 3653-3661 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • fiberglass
  • Polyesters
  • Mechanical testing
  • Glass fibers
  • Laminates
  12 Citations (Scopus)

• Microstructure and fracture behaviour of two stage stir cast Al6061-SiC composites

  Gowri Shankar, M. C., Sharma, S. S., Achutha Kini, U., Hiremath, P. & Gurumurthy, 01-01-2017, In: Journal of Materials and Environmental Science. 8, 1, p. 257-263 7 p.

  Research output: Contribution to journal › Article › peer-review

  • microstructure
  • Microstructure
  • rupture
  • Composite materials
  • mechanical property
  4 Citations (Scopus)

• Potentiality of artificially aged aluminium 6061 hybrid composites reinforced with granite and graphite micro–fillers for structural applications: Potenzial von künstlich gealterten, mit Granit und Graphit verstärkten Aluminium- (6061) Hybrid-Verbundwerkstoffen für konstruktive Anwendungen

  Sharma, S. S., Pai, A. & Gowrishankar, M. C., 01-12-2017, In: Materialwissenschaft und Werkstofftechnik. 48, 11, p. 1082-1092 11 p.

  Research output: Contribution to journal › Article › peer-review

  • granite
  • hybrid composites
  • Graphite
  • Granite
  • Aluminum

• Precipitation hardening effect on the aging characteristics of two step stir cast Al7075-GCI_p composites

  Hindi, J., Achutha Kini, U. & Sharma, S. S., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 670-676 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Cast iron
  • Aging of materials
  • Hardness
  • Composite materials
  1 Citation (Scopus)

• Predictive analysis of peel up delamination in glass fibre reinforced polyester composite drilling

  Bhat, R., Mohan, N., Kulkarni, S. M. & Sharma, S., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 694-702 9 p.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Predictive analytics
  • Polyesters
  • Delamination
  • Glass fibers
  2 Citations (Scopus)

• Prior solutionising deformation consequence on the aging characteristics of steel powder reinforced al 7075 composites

  Rajesh, Sharma, S. S., Gowrishankar, M. C., Shettar, M., Hiremath, P. & Hegde, A., 09-2019, In: International Journal of Recent Technology and Engineering. 8, 2 Special Issue 11, p. 2256-2261 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Powders
  • Aging of materials
  • Hardness
  • Reinforcement

• Quality enhancement of TIG Welded Al6061 SiCp composites by age hardening process

  Shankar, M. C. G., Jayashree, P. K., Sharma, S. S., Shetty, R. & Vinay, K., 01-01-2018, In: International Journal of Automotive and Mechanical Engineering. 15, 3, p. 5573-5582 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Inert gases
  • Tungsten
  • Welds
  • Tensile strength
  3 Citations (Scopus)

• Quench hardening and mechanical characterization of AISI 4140 steel

  Bhagyalaxmi, Sharma, S. & Shetty, A., 01-04-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 2, p. 589-594 6 p., IJMPERDAPR201958.

  Research output: Contribution to journal › Article › peer-review

  • Castor Oil
  • Steel
  • Hardening
  • Ice
  • Oils

• Sliding wear resistance and microhardness of epoxy clay nanocomposite coatings

  Muralishwara, K., Achutha Kini, U., Sharma, S. & Hindi, J., 01-10-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 919-930 12 p., IJMPERDOCT201981.

  Research output: Contribution to journal › Article › peer-review

  • Clay
  • Nanocomposites
  • Microhardness
  • Sonication
  • Wear resistance

• Study of Mechanical Properties of Dual Phase EN19 Steel (AISI4140)

  Gurumurthy, Sharma, S. S., Gowrishankar, Sowmith, Abhishek & Devar, A., 01-10-2016, In: Indian Journal of Science and Technology. 9, 37, 97422.

  Research output: Contribution to journal › Article › peer-review

  • Dual phase steel
  • Heat treatment
  • Hardness
  • Mechanical properties
  • Wear resistance
  2 Citations (Scopus)

• Study of wear behavior and mechanical mixed layer on artificial aged Al6061 composite reinforced with B₄C particles

  Shankar, G., Sharma, S. S., Kini, A., Jayashree, P. K. & Gurumurthy, B. M., 01-03-2016, In: Indian Journal of Science and Technology. 9, 12, 88073.

  Research output: Contribution to journal › Article › peer-review

  • composite materials
  • hardness
  • precipitates
  • iron
  • boron carbides
  4 Citations (Scopus)

• Study on dual-phase structure of AISI4140 steel

  Gurumurthy, B. M., Sharma, S. S., Shankar, M. C. G., Walia, R. & Agarwal, T., 01-09-2016, In: Indian Journal of Science and Technology. 9, 33, 93526.

  Research output: Contribution to journal › Article › peer-review

  • steels
  • normalizing
  • pretreatment
  • impact resistance
  • bainite
  2 Citations (Scopus)

• Study on Mechanical Characteristics of Nanoclay Reinforced Polymer Composites

  Shettar, M., Achutha Kini, U., Sharma, S. S. & Hiremath, P., 01-01-2017, In: Materials Today: Proceedings. 4, 10, p. 11158-11162 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Polymers
  • Polyesters
  • Tensile strength
  • Hardness
  • Resins
  15 Citations (Scopus)

• Study on tensile strength on artificially aged Al-Mg-Si alloy using Taguchi’s technique

  Gowri Shankar, M. C., Shivaprakash, Y. M., Jayashree, P. K., Gurumurthy, B. M. & Sharma, S., 01-01-2019, In: International Journal of Mechanical Engineering and Technology. 10, 1, p. 1312-1320 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Tensile strength
  • Aging of materials
  • Dispersion hardening
  • Cold working
  1 Citation (Scopus)

• Study on the mechanical properties of nanoclay-epoxy composites under different hygrothermal aging conditions

  Shettar, M., Kini, U. A., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 07-06-2019, In: Materials Research Express. 6, 8, 085333.

  Research output: Contribution to journal › Article › peer-review

  • ASTM standards
  • Aging of materials
  • Water
  • Mechanical properties
  • Composite materials
  7 Citations (Scopus)

• Surface roughness analysis in the drilling of carbon fiber/epoxy composite laminates using hybrid Taguchi-Response experimental design

  Shahabaz, S. M., Shetty, N., Shetty, S. D. & Sharma, S. S., 01-01-2019, In: Materials Research Express. 7, 1, 015322.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Carbon Fiber
  • Carbon fibers
  • Design of experiments
  • Laminates
  • Drilling
  1 Citation (Scopus)

• Tensile fractography of artificially aged Al6061-B4C composites

  Sharma, S., Kini, A., Shankar, G., Rakesh, T. C., Raja, H., Chaitanya, K. & Shettar, M., 01-09-2018, In: Journal of Mechanical Engineering and Sciences. 12, 3, p. 3866-3875 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Fractography
  • Aging of materials
  • Composite materials
  • Hardness
  • Reinforcement
  12 Citations (Scopus)

• The hardness behaviour of TIG welded al6061 alloy using statistical tool

  Jayashree, P. K., Raviraj, S., Sharma, S. S. & Shankar, G., 01-06-2018, In: Iranian Journal of Materials Science and Engineering. 15, 2, p. 88-96 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Aging of materials
  • Hardness
  • Noble Gases
  • Tungsten
  • Age hardening

• Wear related study on the precipitation hardened al7075-grey cast iron particulate reinforced composites

  Achutha Kini, U., Hindi, J. & Sharma, S. S., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 703-708 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Cast iron
  • Reinforcement
  • Wear of materials
  • Composite materials
  • Wear resistance
• Conference article

  An integrated approach of CCD-TOPSIS-RSM for optimizing the marine grade GFRP drilling process parameters

  Bhat, R., Mohan, N., Sharma, S., Shandilya, M. & Jayachandran, K., 01-01-2019, In: Materials Today: Proceedings. 19, p. 307-311 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Polyesters
  • Glass fibers
  • Drilling
  • Delamination
  3 Citations (Scopus)

• Ferrite-Bainite Dual Phase Structure and Mechanical Characterization of AISI 4340 Steel

  Gurumurthy, B. M., Sharma, S. S. & Kini, A., 01-01-2018, In: Materials Today: Proceedings. 5, 11, p. 24907-24914 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Phase structure
  • Bainite
  • Steel
  • Ferrite
  • Characterization (materials science)
  5 Citations (Scopus)