Find Research outputs

Search results

• 2016

  Characteristic study and comparison of different hardening methods on low-alloy medium-carbon spring steel

  Mehta, D. B., Sharma, S. S., Gurumurthy, B. M., Kishan Bairy, S., Dsouza, E. J. & Mendonca, A. P., 01-03-2016, In: International Journal of Applied Engineering Research. 11, 2, p. 1542-1547 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Hardening
  • Carbon
  • Steel
  • Heat treatment
  • Phase composition

• Influence of artificial aging on the stir cast Al6061-SiC metal matrix composites under different aging conditions

  Shankar, G., Sharma, S. S., Kini, A., Praksh, S. & Gurumurthy, 01-01-2016, In: International Journal of Technology. 7, 6, p. 1000-1008 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Wear Resistance
  • Matrix
  • Metals
  • Aging of materials
  • Hardness
  6 Citations (Scopus)

• Study of Mechanical Properties of Dual Phase EN19 Steel (AISI4140)

  Gurumurthy, Sharma, S. S., Gowrishankar, Sowmith, Abhishek & Devar, A., 01-10-2016, In: Indian Journal of Science and Technology. 9, 37, 97422.

  Research output: Contribution to journal › Article › peer-review

  • Dual phase steel
  • Heat treatment
  • Hardness
  • Mechanical properties
  • Wear resistance
  2 Citations (Scopus)

• Study of wear behavior and mechanical mixed layer on artificial aged Al6061 composite reinforced with B₄C particles

  Shankar, G., Sharma, S. S., Kini, A., Jayashree, P. K. & Gurumurthy, B. M., 01-03-2016, In: Indian Journal of Science and Technology. 9, 12, 88073.

  Research output: Contribution to journal › Article › peer-review

  • composite materials
  • hardness
  • precipitates
  • iron
  • boron carbides
  4 Citations (Scopus)

• Study on dual-phase structure of AISI4140 steel

  Gurumurthy, B. M., Sharma, S. S., Shankar, M. C. G., Walia, R. & Agarwal, T., 01-09-2016, In: Indian Journal of Science and Technology. 9, 33, 93526.

  Research output: Contribution to journal › Article › peer-review

  • steels
  • normalizing
  • pretreatment
  • impact resistance
  • bainite
  2 Citations (Scopus)

• Surface Improvement of Shafts by Turn-Assisted Deep Cold Rolling Process

  Prabhu, R., Sharma, S. S., Jagannath, K., Kumar, K. & Kulkarni, S. M., 03-10-2016, In: MATEC Web of Conferences. 77, 10006.

  Research output: Contribution to journal › Conference article › peer-review

  • Cold rolling
  • Steel
  • Residual stresses
  • Compressive stress
  • X ray diffraction
  2 Citations (Scopus)
• 2017

  A review on finite element method for machining of composite materials

  Shetty, N., Shahabaz, S. M., Sharma, S. S. & Divakara Shetty, S., 15-09-2017, In: Composite Structures. 176, p. 790-802 13 p.

  Research output: Contribution to journal › Review article › peer-review

  • Drilling
  • Machining
  • Finite element method
  • Composite materials
  • Delamination
  44 Citations (Scopus)

• Effect of artificial aging on fracture behavior of Al6061-Silica (SiO₂) composites

  Jagannath, K., Sharma, S. S., Prabhu, P. R., Gowri Shankar, S. M. C. & Harisha, S. R., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 59-62 4 p. (Materials Science Forum; vol. 880).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Silicon Dioxide
  • Silica
  • Aging of materials
  • silicon dioxide
  • composite materials
  1 Citation (Scopus)

• Effect of homogenizing and age hardening on mechanical property enhancement of TIG welded Al6061 SIC_p composites

  Jayashree, P. K., Sharma, S. S. & Shetty, R., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 89-93 5 p. (Materials Science Forum; vol. 909 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Noble Gases
  • Tungsten
  • Age hardening
  • Inert gases
  • precipitation hardening

• Ferrite-martensite dual phase treatment of AISI 1040 steel and mechanical characterization

  Gurumurthy, B. M., Sharma, S. S. & Kini, A. U., 01-01-2017, Advanced Materials and Engineering Materials VI - 6th ICAMEM. Trans Tech Publications Ltd, p. 280-283 4 p. (Key Engineering Materials; vol. 748 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Martensite
  • Steel
  • Ferrite
  • Tempering
  • Impact resistance
  2 Citations (Scopus)

• FRP-Nanoclay hybrid composites: A review

  Shettar, M., Kini, A., Sharma, S. & Hiremath, P., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 146-150 5 p. (Materials Science Forum; vol. 904 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • hybrid composites
  • mechanical properties
  • Mechanical properties
  • Composite materials
  • Nanocomposites
  10 Citations (Scopus)

• Influence of spheroidizing heat treatment on mechanical properties of EN47 steel

  Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 136-139 4 p. (Materials Science Forum; vol. 880).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Steel
  • Heat treatment
  • heat treatment
  • Hardness
  • Tempering
  5 Citations (Scopus)

• Investigation on effect of nano-fillers on mechanical properties of epoxy based composites using ANOVA

  Shettar, M., Hiremath, P., Kini, A. & Sharma, S., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 137-141 5 p. (Materials Science Forum; vol. 904 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Analysis of variance (ANOVA)
  • fillers
  • Fillers
  • mechanical properties
  • Mechanical properties
  3 Citations (Scopus)

• Metallography & bulk hardness of artificially aged Al6061-B₄C-SiC stir cast hybrid composites

  Sharma, S. S., Jagannath, K., Prabhu, P. R., Gowri, S., Harisha, S. R. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 140-143 4 p. (Materials Science Forum; vol. 880).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • hybrid composites
  • Metallography
  • metallography
  • casts
  • Hardness
  4 Citations (Scopus)

• Microstructure and fracture behaviour of two stage stir cast Al6061-SiC composites

  Gowri Shankar, M. C., Sharma, S. S., Achutha Kini, U., Hiremath, P. & Gurumurthy, 01-01-2017, In: Journal of Materials and Environmental Science. 8, 1, p. 257-263 7 p.

  Research output: Contribution to journal › Article › peer-review

  • microstructure
  • Microstructure
  • rupture
  • Composite materials
  • mechanical property
  4 Citations (Scopus)

• Potentiality of artificially aged aluminium 6061 hybrid composites reinforced with granite and graphite micro–fillers for structural applications: Potenzial von künstlich gealterten, mit Granit und Graphit verstärkten Aluminium- (6061) Hybrid-Verbundwerkstoffen für konstruktive Anwendungen

  Sharma, S. S., Pai, A. & Gowrishankar, M. C., 01-12-2017, In: Materialwissenschaft und Werkstofftechnik. 48, 11, p. 1082-1092 11 p.

  Research output: Contribution to journal › Article › peer-review

  • granite
  • hybrid composites
  • Graphite
  • Granite
  • Aluminum

• Process optimization on hardness of precipitation hardened Al6061 alloy using design of experiments

  Shankar, G., Achutha Kini, U. & Sharma, S. S., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 27-32 6 p. (Materials Science Forum; vol. 909 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • experiment design
  • Design of experiments
  • Age hardening
  • Aging of materials
  • Hardness

• Spheroidize annealing and mechanical property evaluation of AISI 1040 steel

  Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 3-8 6 p. (Materials Science Forum; vol. 909 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • carbon steels
  • Steel
  • Annealing
  • Carbon steel
  • steels
  1 Citation (Scopus)

• Study on Mechanical Characteristics of Nanoclay Reinforced Polymer Composites

  Shettar, M., Achutha Kini, U., Sharma, S. S. & Hiremath, P., 01-01-2017, In: Materials Today: Proceedings. 4, 10, p. 11158-11162 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Polymers
  • Polyesters
  • Tensile strength
  • Hardness
  • Resins
  15 Citations (Scopus)
• 2018

  Analytical study on the effect of copper and nickel in austempered ductile iron using analysis of variance

  Hindi, J., Gurumurthy, B. M., Sharma, S., Gowrishankar, M. C., Jain, N. & Muralidhar, M., 01-08-2018, In: International Journal of Mechanical Engineering and Technology. 9, 8, p. 286-295 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Iron analysis
  • Nodular iron
  • Analysis of variance (ANOVA)
  • Nickel
  • Copper

• Behavioral study of mechanical properties of glass fiber-epoxy composites under moisture absorption

  Kini, U. A., Shettar, M., Sharma, S. & Hiremath, P., 01-07-2018, In: International Journal of Mechanical Engineering and Technology. 9, 7, p. 1-5 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Glass fibers
  • Moisture
  • Bending strength
  • Mechanical properties
  • Tensile strength
  5 Citations (Scopus)

• Comparison of machinability of manganese alloyed austempered ductile iron produced using conventional and two step austempering processes

  Hegde, A. & Sharma, S., 01-05-2018, In: Materials Research Express. 5, 5, 056519.

  Research output: Contribution to journal › Article › peer-review

  • Nodular iron
  • Manganese
  • Machinability
  • Hardness
  • Toughness
  2 Citations (Scopus)

• Effect of heat treatment and mechanical characterization of AISI 4140 steel

  Bhagyalaxmi, Sharma, S. & Kini, V., 29-11-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 6, p. 603-610 8 p., IJMPERDDEC201863.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Characterization (materials science)
  • Heat treatment
  • Tensile strength
  • Hardness
  3 Citations (Scopus)

• Effect of post welded heat treatment on tungsten inert gas welded Al6061-SiC composites

  Jayashree, P. K., Sharma, S. S. & Shetty, R., 01-07-2018, In: International Journal of Mechanical Engineering and Robotics Research. 7, 4, p. 331-337 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Inert gases
  • Tungsten
  • Silicon carbide
  • Heat treatment

• Effect of precipitation hardening on stir cast AL6061-B₄C reinforced composite

  Gowri Shankar, M. C., Jayashree, P. K., Sharma, S. & Kini, A., 01-01-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 5, p. 459-466 8 p., IJMPERDOCT201851.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Aging of materials
  • Composite materials
  • Tensile strength
  • Hardness

• Effect of preheat treatment structure on mechanical characterization of AISI 4340 ferrite bainite dual phase steel

  Gurumurthy, B. M., Sharma, S. S., Kini, A. & Mansoor, S. I., 01-08-2018, In: International Journal of Mechanical Engineering and Technology. 9, 8, p. 84-89 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Dual phase steel
  • Bainite
  • Ferrite
  • Ductility
  • Salts
  3 Citations (Scopus)

• Enhancement in Hardness and Influence of Artificial Aging on Stir Cast Al6061-B₄C and Al6061-SiC Composites

  Gowri Shankar, M. C., Shettar, M., Sharma, S. S., Kini, A. & Jayashree, 01-01-2018, In: Materials Today: Proceedings. 5, 1, p. 2435-2443 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Aging of materials
  • Hardness
  • Composite materials
  • Age hardening
  • Alloying elements
  4 Citations (Scopus)

• Ferrite-Bainite Dual Phase Structure and Mechanical Characterization of AISI 4340 Steel

  Gurumurthy, B. M., Sharma, S. S. & Kini, A., 01-01-2018, In: Materials Today: Proceedings. 5, 11, p. 24907-24914 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Phase structure
  • Bainite
  • Steel
  • Ferrite
  • Characterization (materials science)
  5 Citations (Scopus)

• Hygrothermal Studies on GFRP Composites: A Review

  Shettar, M., Chaudhary, A., Hussain, Z., Kini, U. A. & Sharma, S., 09-01-2018, In: MATEC Web of Conferences. 144, 02026.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Glass fibers
  • Polymers
  • Composite materials
  • Environmental chambers
  7 Citations (Scopus)

• Influence of solutionising and aging treatments on mechanical behavior of Stir-Cast eutectoid steel powder reinforced Al 7075 metal matrix composites

  Rajesh, Sharma, S. & Gowrishankar, M. C., 01-01-2018, In: International Journal of Automotive and Mechanical Engineering. 15, 3, p. 5583-5591 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Carbon steel
  • Powders
  • Aging of materials
  • Composite materials
  • Tensile strength
  5 Citations (Scopus)

• Machinability and related properties of austempered ductile iron: A review

  Hegde, A., Sharma, S. & Gowri Shankar, M. C., 01-12-2018, In: Journal of Mechanical Engineering and Sciences. 12, p. 4180-4190 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Nodular iron
  • Machinability
  • Wear resistance
  • Mechanical properties
  • Graphite
  2 Citations (Scopus)

• Machinability study of manganese alloyed austempered ductile iron

  Hegde, A. & Sharma, S., 01-07-2018, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 40, 7, 338.

  Research output: Contribution to journal › Article › peer-review

  • Nodular iron
  • Machinability
  • Manganese
  • Surface roughness
  • Machining

• Mechanical characteristics evaluation of dual phase and related hardening techniques on AISI 4340 steel

  Gurumurthy, B. M., Sharma, S., Achutha Kini, U., Hegde, A. & Patil, A., 01-12-2018, In: Journal of Mechanical Engineering and Sciences. 12, p. 4018-4029 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Hardening
  • Ferrite
  • Steel
  • Bainite
  • Martensite
  5 Citations (Scopus)

• Mechanical characterization of deformed and heat treated copper-eutectoid steel powder reinforced composites

  Gowri Shankar, M. C., Sharma, S., Karthik, B. M., Pinjar, A. D., Jose, N. & Shriyan, H. C., 01-01-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 6, p. 289-302 14 p.

  Research output: Contribution to journal › Article › peer-review

  • Powders
  • Copper
  • Carbon steel
  • Reinforcement
  • Composite materials

• Optimization of TIG welding parameters for 6061Al alloy using Taguchi's design of experiments

  Jayashree, P. K., Sharma, S. S., Shetty, R., Mahato, A. & Gowrishankar, M. C., 01-01-2018, In: Materials Today: Proceedings. 5, 11, p. 23648-23655 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Inert gas welding
  • Tungsten
  • Design of experiments
  • Welding
  • Welds
  4 Citations (Scopus)

• Property Enhancement during Artificial Aging of Al6061- Silicon Oxide Metal Matrix Composites

  Prakash, Y. M. S., Shankar, M. C. G., Karthik, Sharma, S. S. & Kini, A., 01-01-2018, In: Materials Today: Proceedings. 5, 11, p. 24186-24193 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Silicon oxides
  • Metals
  • Aging of materials
  • Hardness
  • Composite materials
  2 Citations (Scopus)

• Quality enhancement of TIG Welded Al6061 SiCp composites by age hardening process

  Shankar, M. C. G., Jayashree, P. K., Sharma, S. S., Shetty, R. & Vinay, K., 01-01-2018, In: International Journal of Automotive and Mechanical Engineering. 15, 3, p. 5573-5582 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Inert gases
  • Tungsten
  • Welds
  • Tensile strength
  3 Citations (Scopus)

• Quench hardening and mechanical characterization of AISI 4140 steel

  Bhagyalaxmi, Sharma, S. & Shetty, A., 01-04-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 2, p. 589-594 6 p., IJMPERDAPR201958.

  Research output: Contribution to journal › Article › peer-review

  • Castor Oil
  • Steel
  • Hardening
  • Ice
  • Oils

• Study on Spheroidization and Related Heat Treatments of Medium Carbon Alloy Steels

  Harisha, S. R., Sharma, S., Kini, U. A. & Gowri Shankar, M. C., 09-01-2018, In: MATEC Web of Conferences. 144, 02008.

  Research output: Contribution to journal › Conference article › peer-review

  • Alloy steel
  • Carbon steel
  • Heat treatment
  • Carbon
  • Iron alloys
  3 Citations (Scopus)

• Tensile fractography of artificially aged Al6061-B4C composites

  Sharma, S., Kini, A., Shankar, G., Rakesh, T. C., Raja, H., Chaitanya, K. & Shettar, M., 01-09-2018, In: Journal of Mechanical Engineering and Sciences. 12, 3, p. 3866-3875 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Fractography
  • Aging of materials
  • Composite materials
  • Hardness
  • Reinforcement
  12 Citations (Scopus)

• The hardness behaviour of TIG welded al6061 alloy using statistical tool

  Jayashree, P. K., Raviraj, S., Sharma, S. S. & Shankar, G., 01-06-2018, In: Iranian Journal of Materials Science and Engineering. 15, 2, p. 88-96 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Aging of materials
  • Hardness
  • Noble Gases
  • Tungsten
  • Age hardening
• 2019

  A comprehensive study of glass fibre reinforced polymer (GFRP) drilling

  Mohan, N., Sharma, S. & Bhat, R., 01-02-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 1, p. 1-10 10 p.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Glass fibers
  • Polymers
  • Drilling
  • Machining
  5 Citations (Scopus)

• Aging kinetics and microstructural features of Al6061-SiC+B₄C stir cast hybrid composites

  Sathyashankarasharma, Gurumurthy, Gowrishankar, Kini, A., Shettar, M. & Hiremath, P., 31-12-2019, In: International Journal of Automotive and Mechanical Engineering. 16, 4, p. 7211-7224 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Aging of materials
  • Composite materials
  • Intermetallics
  • Reinforcement
  • Hardness
  3 Citations (Scopus)

• An integrated approach of CCD-TOPSIS-RSM for optimizing the marine grade GFRP drilling process parameters

  Bhat, R., Mohan, N., Sharma, S., Shandilya, M. & Jayachandran, K., 01-01-2019, In: Materials Today: Proceedings. 19, p. 307-311 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Polyesters
  • Glass fibers
  • Drilling
  • Delamination
  3 Citations (Scopus)

• Effect of carburization on microstructure of low carbon steel and the influence of process parameters on its tribological behavior

  Hiremath, P., Sharma, S., Gowrishankar, M. C., Shettar, M., Kowshik, C. S. S. & Naik, N., 01-06-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 718-725 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Low carbon steel
  • Microstructure
  • Wear of materials
  • Case hardening
  1 Citation (Scopus)

• Effect of hygrothermal aging on the mechanical properties of nanoclay-glass fiber-epoxy composite and optimization using full factorial design

  Kini, U. A., Shettar, M., Sharma, S., Hiremath, P., Gowrishankar, M. C., Hegde, A. & Siddhartha, D., 20-03-2019, In: Materials Research Express. 6, 6, 065311.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Glass fibers
  • Aging of materials
  • Mechanical properties
  • Bending strength
  9 Citations (Scopus)

• Epoxy-clay nanocomposite coatings: A review on synthesis and characterization

  Muralishwara, K., Kini, U. A. & Sharma, S., 12-06-2019, In: Materials Research Express. 6, 8, 082007.

  Research output: Contribution to journal › Review article › peer-review

  • Clay
  • Nanocomposites
  • Thermodynamic stability
  • Characterization (materials science)
  • Agglomeration
  5 Citations (Scopus)

• Experimental investigation on the tensile and flexural strength of nano-polymer composites

  Shettar, M., Kini, U. A., Sharma, S. & Hiremath, P., 01-09-2019, In: International Journal of Mechanical Engineering and Robotics Research. 8, 5, p. 702-707 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Bending strength
  • Tensile strength
  • Polymers
  • Glass fibers
  • Composite materials

• Influence of austenite and ferrite stabilizers on the microstructure and related mechanical properties of carburized steels

  Sharma, S., Hiremath, P., Gowrishankar, M. C. & Shettar, M., 01-01-2019, In: International Journal of Mechanical Engineering and Technology. 10, 1, p. 1235-1245 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Austenite
  • Ferrite
  • Microstructure
  • Mechanical properties
  • Steel
  4 Citations (Scopus)

• Influence of coconut shell powder carburizing medium and sodium carbonate energizer on carbon diffusion and hardness of pack carburized steels

  Hiremath, P., Sharma, S., Gowrishankar, M. C., Shettar, M. & Seregar, J., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 677-685 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • sodium carbonate
  • Sodium Carbonate
  • Carburizing
  • Steel
  • Powders
  1 Citation (Scopus)