Find Research Outputs

Search results

• Influence of spheroidizing heat treatment on mechanical properties of EN47 steel

  Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 136-139 4 p. (Materials Science Forum; vol. 880).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Steel
  • Heat treatment
  • heat treatment
  • Hardness
  • Tempering
  5 Citations (Scopus)

• Influence of solutionising and aging treatments on mechanical behavior of Stir-Cast eutectoid steel powder reinforced Al 7075 metal matrix composites

  Rajesh, Sharma, S. & Gowrishankar, M. C., 01-01-2018, In: International Journal of Automotive and Mechanical Engineering. 15, 3, p. 5583-5591 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Carbon steel
  • Powders
  • Aging of materials
  • Composite materials
  • Tensile strength
  5 Citations (Scopus)

• Influence of homogenization and aging on tensile strength and fracture behavior of TIG welded Al6061-SiC composites

  Jayashree, P. K., Gowrishankar, M. C., Sharma, S., Shetty, R., Shettar, M. & Hiremath, P., 01-01-2020, In: Journal of Materials Research and Technology.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Tensile strength
  • Aging of materials
  • Composite materials
  • Hardness
  • Metals

• Influence of coconut shell powder carburizing medium and sodium carbonate energizer on carbon diffusion and hardness of pack carburized steels

  Hiremath, P., Sharma, S., Gowrishankar, M. C., Shettar, M. & Seregar, J., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 677-685 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • sodium carbonate
  • Sodium Carbonate
  • Carburizing
  • Steel
  • Powders
  1 Citation (Scopus)

• Influence of austenite and ferrite stabilizers on the microstructure and related mechanical properties of carburized steels

  Sharma, S., Hiremath, P., Gowrishankar, M. C. & Shettar, M., 01-01-2019, In: International Journal of Mechanical Engineering and Technology. 10, 1, p. 1235-1245 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Austenite
  • Ferrite
  • Microstructure
  • Mechanical properties
  • Steel
  4 Citations (Scopus)

• Influence of artificial aging on the stir cast Al6061-SiC metal matrix composites under different aging conditions

  Shankar, G., Sharma, S. S., Kini, A., Praksh, S. & Gurumurthy, 01-01-2016, In: International Journal of Technology. 7, 6, p. 1000-1008 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Wear Resistance
  • Matrix
  • Metals
  • Aging of materials
  • Hardness
  6 Citations (Scopus)

• Hygrothermal Studies on GFRP Composites: A Review

  Shettar, M., Chaudhary, A., Hussain, Z., Kini, U. A. & Sharma, S., 09-01-2018, In: MATEC Web of Conferences. 144, 02026.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Glass fibers
  • Polymers
  • Composite materials
  • Environmental chambers
  7 Citations (Scopus)

• Hygrothermal chamber aging effect on mechanical behavior and morphology of glass fiber-epoxy-nanoclay composites

  Shettar, M., Kini, U. A., Sharma, S., Hiremath, P. & Gowrishankar, G. C. G., 01-01-2020, In: Materials Research Express. 7, 1, 015318.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • fiberglass
  • Glass fibers
  • Aging of materials
  • Composite materials
  • Casting
  2 Citations (Scopus)

• FRP-Nanoclay hybrid composites: A review

  Shettar, M., Kini, A., Sharma, S. & Hiremath, P., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 146-150 5 p. (Materials Science Forum; vol. 904 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • hybrid composites
  • mechanical properties
  • Mechanical properties
  • Composite materials
  • Nanocomposites
  10 Citations (Scopus)

• Ferrite-martensite dual phase treatment of AISI 1040 steel and mechanical characterization

  Gurumurthy, B. M., Sharma, S. S. & Kini, A. U., 01-01-2017, Advanced Materials and Engineering Materials VI - 6th ICAMEM. Trans Tech Publications Ltd, p. 280-283 4 p. (Key Engineering Materials; vol. 748 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Martensite
  • Steel
  • Ferrite
  • Tempering
  • Impact resistance
  2 Citations (Scopus)

• Ferrite-Bainite Dual Phase Structure and Mechanical Characterization of AISI 4340 Steel

  Gurumurthy, B. M., Sharma, S. S. & Kini, A., 01-01-2018, In: Materials Today: Proceedings. 5, 11, p. 24907-24914 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Phase structure
  • Bainite
  • Steel
  • Ferrite
  • Characterization (materials science)
  5 Citations (Scopus)

• Experimental validity on the casting characteristics of stir cast aluminium composites

  Gowrishankar, M. C., Hiremath, P., Shettar, M., Sharma, S. & Satish Rao, U., 01-01-2020, In: Journal of Materials Research and Technology.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Aluminum
  • Casting
  • Composite materials
  • Reinforcement
  • Aluminum alloys
  5 Citations (Scopus)

• Experimental investigation on the tensile and flexural strength of nano-polymer composites

  Shettar, M., Kini, U. A., Sharma, S. & Hiremath, P., 01-09-2019, In: International Journal of Mechanical Engineering and Robotics Research. 8, 5, p. 702-707 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Bending strength
  • Tensile strength
  • Polymers
  • Glass fibers
  • Composite materials

• Epoxy-clay nanocomposite coatings: A review on synthesis and characterization

  Muralishwara, K., Kini, U. A. & Sharma, S., 12-06-2019, In: Materials Research Express. 6, 8, 082007.

  Research output: Contribution to journal › Review article › peer-review

  • Clay
  • Nanocomposites
  • Thermodynamic stability
  • Characterization (materials science)
  • Agglomeration
  5 Citations (Scopus)

• Enhancement in Hardness and Influence of Artificial Aging on Stir Cast Al6061-B₄C and Al6061-SiC Composites

  Gowri Shankar, M. C., Shettar, M., Sharma, S. S., Kini, A. & Jayashree, 01-01-2018, In: Materials Today: Proceedings. 5, 1, p. 2435-2443 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Aging of materials
  • Hardness
  • Composite materials
  • Age hardening
  • Alloying elements
  3 Citations (Scopus)

• Effect of preheat treatment structure on mechanical characterization of AISI 4340 ferrite bainite dual phase steel

  Gurumurthy, B. M., Sharma, S. S., Kini, A. & Mansoor, S. I., 01-08-2018, In: International Journal of Mechanical Engineering and Technology. 9, 8, p. 84-89 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Dual phase steel
  • Bainite
  • Ferrite
  • Ductility
  • Salts
  2 Citations (Scopus)

• Effect of precipitation hardening on stir cast AL6061-B₄C reinforced composite

  Gowri Shankar, M. C., Jayashree, P. K., Sharma, S. & Kini, A., 01-01-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 5, p. 459-466 8 p., IJMPERDOCT201851.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Aging of materials
  • Composite materials
  • Tensile strength
  • Hardness

• Effect of post welded heat treatment on tungsten inert gas welded Al6061-SiC composites

  Jayashree, P. K., Sharma, S. S. & Shetty, R., 01-07-2018, In: International Journal of Mechanical Engineering and Robotics Research. 7, 4, p. 331-337 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Inert gases
  • Tungsten
  • Silicon carbide
  • Heat treatment

• Effect of post carburizing treatments on residual stress distribution in plain carbon and alloy steels- A numerical analysis

  Hiremath, P., Sharma, S., Gowrishankar, M. C., Shettar, M. & Gurumurthy, B. M., 2020, In: Journal of Materials Research and Technology. 9, 4, p. 8439-8450 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Carburizing
  • Steel
  • Alloy steel
  • Carbon steel
  • Numerical analysis

• Effect of hygrothermal aging on the mechanical properties of nanoclay-glass fiber-epoxy composite and optimization using full factorial design

  Kini, U. A., Shettar, M., Sharma, S., Hiremath, P., Gowrishankar, M. C., Hegde, A. & Siddhartha, D., 20-03-2019, In: Materials Research Express. 6, 6, 065311.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Glass fibers
  • Aging of materials
  • Mechanical properties
  • Bending strength
  7 Citations (Scopus)

• Effect of homogenizing and age hardening on mechanical property enhancement of TIG welded Al6061 SIC_p composites

  Jayashree, P. K., Sharma, S. S. & Shetty, R., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 89-93 5 p. (Materials Science Forum; vol. 909 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Noble Gases
  • Tungsten
  • Age hardening
  • Inert gases
  • precipitation hardening

• Effect of heat treatment and mechanical characterization of AISI 4140 steel

  Bhagyalaxmi, Sharma, S. & Kini, V., 29-11-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 6, p. 603-610 8 p., IJMPERDDEC201863.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Characterization (materials science)
  • Heat treatment
  • Tensile strength
  • Hardness
  2 Citations (Scopus)

• Effect of heat treatment and inhibitor on corrosion behavior of AISI 4140 steel

  Bhagyalaxmi, Sharma, S. & Kini, U. A., 01-01-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 87-100 14 p., IJMPERDAPR20208.

  Research output: Contribution to journal › Article › peer-review

  • Thioureas
  • Thiourea
  • Corrosion inhibitors
  • Steel
  • Heat treatment

• Effect of carburization on microstructure of low carbon steel and the influence of process parameters on its tribological behavior

  Hiremath, P., Sharma, S., Gowrishankar, M. C., Shettar, M., Kowshik, C. S. S. & Naik, N., 01-06-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 718-725 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Low carbon steel
  • Microstructure
  • Wear of materials
  • Case hardening
  1 Citation (Scopus)

• Effect of artificial aging on fracture behavior of Al6061-Silica (SiO₂) composites

  Jagannath, K., Sharma, S. S., Prabhu, P. R., Gowri Shankar, S. M. C. & Harisha, S. R., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 59-62 4 p. (Materials Science Forum; vol. 880).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Silicon Dioxide
  • Silica
  • Aging of materials
  • silicon dioxide
  • composite materials
  1 Citation (Scopus)

• Comparison of machinability of manganese alloyed austempered ductile iron produced using conventional and two step austempering processes

  Hegde, A. & Sharma, S., 01-05-2018, In: Materials Research Express. 5, 5, 056519.

  Research output: Contribution to journal › Article › peer-review

  • Nodular iron
  • Manganese
  • Machinability
  • Hardness
  • Toughness
  2 Citations (Scopus)

• Coated and uncoated reinforcements metal matrix composites characteristics and applications–A critical review

  B M, K., M C, G., Sharma, S., Hiremath, P., Shettar, M. & Shetty, N., 2020, In: Cogent Engineering. 7, 1, 1856758.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Metals
  • Reinforcement
  • Composite materials
  • Nickel
  • Copper

• Characteristic study and comparison of different hardening methods on low-alloy medium-carbon spring steel

  Mehta, D. B., Sharma, S. S., Gurumurthy, B. M., Kishan Bairy, S., Dsouza, E. J. & Mendonca, A. P., 01-03-2016, In: International Journal of Applied Engineering Research. 11, 2, p. 1542-1547 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Hardening
  • Carbon
  • Steel
  • Heat treatment
  • Phase composition

• Behavioral study of mechanical properties of glass fiber-epoxy composites under moisture absorption

  Kini, U. A., Shettar, M., Sharma, S. & Hiremath, P., 01-07-2018, In: International Journal of Mechanical Engineering and Technology. 9, 7, p. 1-5 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Glass fibers
  • Moisture
  • Bending strength
  • Mechanical properties
  • Tensile strength
  5 Citations (Scopus)

• A review on finite element method for machining of composite materials

  Shetty, N., Shahabaz, S. M., Sharma, S. S. & Divakara Shetty, S., 15-09-2017, In: Composite Structures. 176, p. 790-802 13 p.

  Research output: Contribution to journal › Review article › peer-review

  • Drilling
  • Machining
  • Finite element method
  • Composite materials
  • Delamination
  42 Citations (Scopus)

• An integrated approach of CCD-TOPSIS-RSM for optimizing the marine grade GFRP drilling process parameters

  Bhat, R., Mohan, N., Sharma, S., Shandilya, M. & Jayachandran, K., 01-01-2019, In: Materials Today: Proceedings. 19, p. 307-311 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Polyesters
  • Glass fibers
  • Drilling
  • Delamination
  3 Citations (Scopus)

• Analytical study on the effect of copper and nickel in austempered ductile iron using analysis of variance

  Hindi, J., Gurumurthy, B. M., Sharma, S., Gowrishankar, M. C., Jain, N. & Muralidhar, M., 01-08-2018, In: International Journal of Mechanical Engineering and Technology. 9, 8, p. 286-295 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Iron analysis
  • Nodular iron
  • Analysis of variance (ANOVA)
  • Nickel
  • Copper

• Analysis on magnetocaloric and structural properties of heusler alloys used in magnetic refrigeration

  Sandeep Nambiar, S., Murthy, B. R. N., Sharma, S. & Prasanna, A. A., 08-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 4, p. 29-46 18 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Magnetic refrigeration
  • Structural properties
  • Martensitic transformations
  • Temperature
  • Refrigerants

• Aging kinetics and microstructural features of Al6061-SiC+B₄C stir cast hybrid composites

  Sathyashankarasharma, Gurumurthy, Gowrishankar, Kini, A., Shettar, M. & Hiremath, P., 31-12-2019, In: International Journal of Automotive and Mechanical Engineering. 16, 4, p. 7211-7224 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Aging of materials
  • Composite materials
  • Intermetallics
  • Reinforcement
  • Hardness
  3 Citations (Scopus)

• A comprehensive study of glass fibre reinforced polymer (GFRP) drilling

  Mohan, N., Sharma, S. & Bhat, R., 01-02-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 1, p. 1-10 10 p.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Glass fibers
  • Polymers
  • Drilling
  • Machining
  5 Citations (Scopus)