Find Research outputs

Search results

• Article

  Study of Mechanical Properties of Dual Phase EN19 Steel (AISI4140)

  Gurumurthy, Sharma, S. S., Gowrishankar, Sowmith, Abhishek & Devar, A., 01-10-2016, In: Indian Journal of Science and Technology. 9, 37, 97422.

  Research output: Contribution to journal › Article › peer-review

  • Dual phase steel
  • Heat treatment
  • Hardness
  • Mechanical properties
  • Wear resistance
  2 Citations (Scopus)

• Study of wear behavior and mechanical mixed layer on artificial aged Al6061 composite reinforced with B₄C particles

  Shankar, G., Sharma, S. S., Kini, A., Jayashree, P. K. & Gurumurthy, B. M., 01-03-2016, In: Indian Journal of Science and Technology. 9, 12, 88073.

  Research output: Contribution to journal › Article › peer-review

  • composite materials
  • hardness
  • precipitates
  • iron
  • boron carbides
  4 Citations (Scopus)

• Study on dual-phase structure of AISI4140 steel

  Gurumurthy, B. M., Sharma, S. S., Shankar, M. C. G., Walia, R. & Agarwal, T., 01-09-2016, In: Indian Journal of Science and Technology. 9, 33, 93526.

  Research output: Contribution to journal › Article › peer-review

  • steels
  • normalizing
  • pretreatment
  • impact resistance
  • bainite
  2 Citations (Scopus)

• Study on Mechanical Characteristics of Nanoclay Reinforced Polymer Composites

  Shettar, M., Achutha Kini, U., Sharma, S. S. & Hiremath, P., 01-01-2017, In: Materials Today: Proceedings. 4, 10, p. 11158-11162 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Polymers
  • Polyesters
  • Tensile strength
  • Hardness
  • Resins
  15 Citations (Scopus)

• Study on tensile strength on artificially aged Al-Mg-Si alloy using Taguchi’s technique

  Gowri Shankar, M. C., Shivaprakash, Y. M., Jayashree, P. K., Gurumurthy, B. M. & Sharma, S., 01-01-2019, In: International Journal of Mechanical Engineering and Technology. 10, 1, p. 1312-1320 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Tensile strength
  • Aging of materials
  • Dispersion hardening
  • Cold working
  1 Citation (Scopus)

• Study on the mechanical properties of nanoclay-epoxy composites under different hygrothermal aging conditions

  Shettar, M., Kini, U. A., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 07-06-2019, In: Materials Research Express. 6, 8, 085333.

  Research output: Contribution to journal › Article › peer-review

  • ASTM standards
  • Aging of materials
  • Water
  • Mechanical properties
  • Composite materials
  7 Citations (Scopus)

• Surface Properties and Corrosion Behavior of Turn-Assisted Deep-Cold-Rolled AISI 4140 Steel

  Prabhu, P. R., Prabhu, D., Sharma, S. & Kulkarni, S. M., 01-09-2020, In: Journal of Materials Engineering and Performance.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Steel
  • Surface properties
  • Corrosion
  • Corrosion rate
  • Residual stresses

• Surface roughness analysis in the drilling of carbon fiber/epoxy composite laminates using hybrid Taguchi-Response experimental design

  Shahabaz, S. M., Shetty, N., Shetty, S. D. & Sharma, S. S., 01-01-2019, In: Materials Research Express. 7, 1, 015322.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Carbon Fiber
  • Carbon fibers
  • Design of experiments
  • Laminates
  • Drilling
  1 Citation (Scopus)

• Tensile fractography of artificially aged Al6061-B4C composites

  Sharma, S., Kini, A., Shankar, G., Rakesh, T. C., Raja, H., Chaitanya, K. & Shettar, M., 01-09-2018, In: Journal of Mechanical Engineering and Sciences. 12, 3, p. 3866-3875 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Fractography
  • Aging of materials
  • Composite materials
  • Hardness
  • Reinforcement
  12 Citations (Scopus)

• The hardness behaviour of TIG welded al6061 alloy using statistical tool

  Jayashree, P. K., Raviraj, S., Sharma, S. S. & Shankar, G., 01-06-2018, In: Iranian Journal of Materials Science and Engineering. 15, 2, p. 88-96 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Aging of materials
  • Hardness
  • Noble Gases
  • Tungsten
  • Age hardening

• Wear related study on the precipitation hardened al7075-grey cast iron particulate reinforced composites

  Achutha Kini, U., Hindi, J. & Sharma, S. S., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 703-708 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Cast iron
  • Reinforcement
  • Wear of materials
  • Composite materials
  • Wear resistance
• Conference article

  An integrated approach of CCD-TOPSIS-RSM for optimizing the marine grade GFRP drilling process parameters

  Bhat, R., Mohan, N., Sharma, S., Shandilya, M. & Jayachandran, K., 01-01-2019, In: Materials Today: Proceedings. 19, p. 307-311 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Polyesters
  • Glass fibers
  • Drilling
  • Delamination
  3 Citations (Scopus)

• Ferrite-Bainite Dual Phase Structure and Mechanical Characterization of AISI 4340 Steel

  Gurumurthy, B. M., Sharma, S. S. & Kini, A., 01-01-2018, In: Materials Today: Proceedings. 5, 11, p. 24907-24914 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Phase structure
  • Bainite
  • Steel
  • Ferrite
  • Characterization (materials science)
  5 Citations (Scopus)

• Hygrothermal Studies on GFRP Composites: A Review

  Shettar, M., Chaudhary, A., Hussain, Z., Kini, U. A. & Sharma, S., 09-01-2018, In: MATEC Web of Conferences. 144, 02026.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Glass fibers
  • Polymers
  • Composite materials
  • Environmental chambers
  7 Citations (Scopus)

• Multiple response optimisation of process parameters during drilling of GFRP composite with a solid carbide twist drill

  Bhat, R., Mohan, N., Sharma, S., Pai, D. & Kulkarni, S., 01-01-2020, In: Materials Today: Proceedings. 28, p. 2039-2046 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Glass fibers
  • Carbides
  • Polymers
  • Drilling
  1 Citation (Scopus)

• Multi-response optimization of the thrust force, torque and surface roughness in drilling of glass fiber reinforced polyester composite using GRA-RSM

  Bhat, R., Mohan, N., Sharma, S., Agarwal, R. A., Rathi, A. & Subudhi, K. A., 01-01-2019, In: Materials Today: Proceedings. 19, p. 333-338 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Polyesters
  • Glass fibers
  • Drilling
  • Surface roughness
  6 Citations (Scopus)

• Multi response parametric optimisation in machining of marine application based GFRP composite with HSS drill: Application of TOPSIS approach

  Bhat, R., Mohan, N., Sharma, S., Kini, A. U., Shivakumar, S. & Naik, N., 01-01-2020, In: Materials Today: Proceedings. 28, p. 2077-2083 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Marine applications
  • fiberglass
  • Machining
  • Glass fibers
  • Composite materials
  2 Citations (Scopus)

• Optimization of TIG welding parameters for 6061Al alloy using Taguchi's design of experiments

  Jayashree, P. K., Sharma, S. S., Shetty, R., Mahato, A. & Gowrishankar, M. C., 01-01-2018, In: Materials Today: Proceedings. 5, 11, p. 23648-23655 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Inert gas welding
  • Tungsten
  • Design of experiments
  • Welding
  • Welds
  4 Citations (Scopus)

• Property Enhancement during Artificial Aging of Al6061- Silicon Oxide Metal Matrix Composites

  Prakash, Y. M. S., Shankar, M. C. G., Karthik, Sharma, S. S. & Kini, A., 01-01-2018, In: Materials Today: Proceedings. 5, 11, p. 24186-24193 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Silicon oxides
  • Metals
  • Aging of materials
  • Hardness
  • Composite materials
  2 Citations (Scopus)

• Study on Spheroidization and Related Heat Treatments of Medium Carbon Alloy Steels

  Harisha, S. R., Sharma, S., Kini, U. A. & Gowri Shankar, M. C., 09-01-2018, In: MATEC Web of Conferences. 144, 02008.

  Research output: Contribution to journal › Conference article › peer-review

  • Alloy steel
  • Carbon steel
  • Heat treatment
  • Carbon
  • Iron alloys
  3 Citations (Scopus)

• Surface Improvement of Shafts by Turn-Assisted Deep Cold Rolling Process

  Prabhu, R., Sharma, S. S., Jagannath, K., Kumar, K. & Kulkarni, S. M., 03-10-2016, In: MATEC Web of Conferences. 77, 10006.

  Research output: Contribution to journal › Conference article › peer-review

  • Cold rolling
  • Steel
  • Residual stresses
  • Compressive stress
  • X ray diffraction
  2 Citations (Scopus)
• Conference contribution

  Effect of artificial aging on fracture behavior of Al6061-Silica (SiO₂) composites

  Jagannath, K., Sharma, S. S., Prabhu, P. R., Gowri Shankar, S. M. C. & Harisha, S. R., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 59-62 4 p. (Materials Science Forum; vol. 880).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Silicon Dioxide
  • Silica
  • Aging of materials
  • silicon dioxide
  • composite materials
  1 Citation (Scopus)

• Effect of homogenizing and age hardening on mechanical property enhancement of TIG welded Al6061 SIC_p composites

  Jayashree, P. K., Sharma, S. S. & Shetty, R., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 89-93 5 p. (Materials Science Forum; vol. 909 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Noble Gases
  • Tungsten
  • Age hardening
  • Inert gases
  • precipitation hardening

• Ferrite-martensite dual phase treatment of AISI 1040 steel and mechanical characterization

  Gurumurthy, B. M., Sharma, S. S. & Kini, A. U., 01-01-2017, Advanced Materials and Engineering Materials VI - 6th ICAMEM. Trans Tech Publications Ltd, p. 280-283 4 p. (Key Engineering Materials; vol. 748 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Martensite
  • Steel
  • Ferrite
  • Tempering
  • Impact resistance
  2 Citations (Scopus)

• FRP-Nanoclay hybrid composites: A review

  Shettar, M., Kini, A., Sharma, S. & Hiremath, P., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 146-150 5 p. (Materials Science Forum; vol. 904 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • hybrid composites
  • mechanical properties
  • Mechanical properties
  • Composite materials
  • Nanocomposites
  10 Citations (Scopus)

• Influence of spheroidizing heat treatment on mechanical properties of EN47 steel

  Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 136-139 4 p. (Materials Science Forum; vol. 880).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Steel
  • Heat treatment
  • heat treatment
  • Hardness
  • Tempering
  5 Citations (Scopus)

• Investigation on effect of nano-fillers on mechanical properties of epoxy based composites using ANOVA

  Shettar, M., Hiremath, P., Kini, A. & Sharma, S., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 137-141 5 p. (Materials Science Forum; vol. 904 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Analysis of variance (ANOVA)
  • fillers
  • Fillers
  • mechanical properties
  • Mechanical properties
  3 Citations (Scopus)

• Mechanical property association of dual phase and austempered aisi 4140 normalized steel

  Sharma, S., Gurumurthy, B. M., Achutha Kini, U., Gowrishankar, M. C. & Shivaprakash, Y. M., 2020, Frontiers of Composite Materials IV. Martin, D. & Perova, T. (eds.). Trans Tech Publications Ltd, p. 174-179 6 p. (Materials Science Forum; vol. 995 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Martensite
  • Steel
  • Impact strength
  • Ferrite
  • Tensile strength

• Metallography & bulk hardness of artificially aged Al6061-B₄C-SiC stir cast hybrid composites

  Sharma, S. S., Jagannath, K., Prabhu, P. R., Gowri, S., Harisha, S. R. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 140-143 4 p. (Materials Science Forum; vol. 880).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • hybrid composites
  • Metallography
  • metallography
  • casts
  • Hardness
  4 Citations (Scopus)

• Post solutionising rolling sway on the precipitation behaviour of eutectoid steel powder reinforced al7075 ternary alloy composites

  Rajesh, Sharma, S., Gowrishankar, M. C., Shettar, M., Hiremath, P. & Hegde, A., 2020, Frontiers of Composite Materials IV. Martin, D. & Perova, T. (eds.). Trans Tech Publications Ltd, p. 9-14 6 p. (Materials Science Forum; vol. 995 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Ternary alloys
  • ternary alloys
  • Powders
  • Carbon steel
  • Aging of materials

• Process optimization on hardness of precipitation hardened Al6061 alloy using design of experiments

  Shankar, G., Achutha Kini, U. & Sharma, S. S., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 27-32 6 p. (Materials Science Forum; vol. 909 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • experiment design
  • Design of experiments
  • Age hardening
  • Aging of materials
  • Hardness

• Spheroidize annealing and mechanical property evaluation of AISI 1040 steel

  Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 3-8 6 p. (Materials Science Forum; vol. 909 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • carbon steels
  • Steel
  • Annealing
  • Carbon steel
  • steels
  1 Citation (Scopus)

• Tensile fractography of artificially aged al6061-sic+b4c hybrid composites

  Sharma, S., Gowrishankar, M. C., Hiremath, P., Shettar, M. & Gurumurthy, B. M., 2020, Frontiers of Composite Materials IV. Martin, D. & Perova, T. (eds.). Trans Tech Publications Ltd, p. 3-8 6 p. (Materials Science Forum; vol. 995 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • silicon carbide
  • hybrid composites
  • fractography
  • Fractography
  • Silicon carbide
• Review article

  A review on finite element method for machining of composite materials

  Shetty, N., Shahabaz, S. M., Sharma, S. S. & Divakara Shetty, S., 15-09-2017, In: Composite Structures. 176, p. 790-802 13 p.

  Research output: Contribution to journal › Review article › peer-review

  • Drilling
  • Machining
  • Finite element method
  • Composite materials
  • Delamination
  44 Citations (Scopus)

• Epoxy-clay nanocomposite coatings: A review on synthesis and characterization

  Muralishwara, K., Kini, U. A. & Sharma, S., 12-06-2019, In: Materials Research Express. 6, 8, 082007.

  Research output: Contribution to journal › Review article › peer-review

  • Clay
  • Nanocomposites
  • Thermodynamic stability
  • Characterization (materials science)
  • Agglomeration
  5 Citations (Scopus)