Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2017
  • 2016

Author

  • Sathya Shankara Sharma
2016

Characteristic study and comparison of different hardening methods on low-alloy medium-carbon spring steel

Mehta, D. B., Sharma, S. S., Gurumurthy, B. M., Kishan Bairy, S., Dsouza, E. J. & Mendonca, A. P., 01-03-2016, In : International Journal of Applied Engineering Research. 11, 2, p. 1542-1547 6 p.

Research output: Contribution to journalArticle

Influence of artificial aging on the stir cast Al6061-SiC metal matrix composites under different aging conditions

Shankar, G., Sharma, S. S., Kini, A., Praksh, S. & Gurumurthy, 01-01-2016, In : International Journal of Technology. 7, 6, p. 1000-1008 9 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Study of Mechanical Properties of Dual Phase EN19 Steel (AISI4140)

Gurumurthy, Sharma, S. S., Gowrishankar, Sowmith, Abhishek & Devar, A., 01-10-2016, In : Indian Journal of Science and Technology. 9, 37, 97422.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Study of wear behavior and mechanical mixed layer on artificial aged Al6061 composite reinforced with B4C particles

Shankar, G., Sharma, S. S., Kini, A., Jayashree, P. K. & Gurumurthy, B. M., 01-03-2016, In : Indian Journal of Science and Technology. 9, 12, 88073.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Study on dual-phase structure of AISI4140 steel

Gurumurthy, B. M., Sharma, S. S., Shankar, M. C. G., Walia, R. & Agarwal, T., 01-09-2016, In : Indian Journal of Science and Technology. 9, 33, 93526.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Surface Improvement of Shafts by Turn-Assisted Deep Cold Rolling Process

Prabhu, R., Sharma, S. S., Jagannath, K., Kumar, K. & Kulkarni, S. M., 03-10-2016, In : MATEC Web of Conferences. 77, 10006.

Research output: Contribution to journalConference article

1 Citation (Scopus)
2017

A review on finite element method for machining of composite materials

Shetty, N., Shahabaz, S. M., Sharma, S. S. & Divakara Shetty, S., 15-09-2017, In : Composite Structures. 176, p. 790-802 13 p.

Research output: Contribution to journalReview article

36 Citations (Scopus)

Effect of artificial aging on fracture behavior of Al6061-Silica (SiO2) composites

Jagannath, K., Sharma, S. S., Prabhu, P. R., Gowri Shankar, S. M. C. & Harisha, S. R., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 59-62 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effect of homogenizing and age hardening on mechanical property enhancement of TIG welded Al6061 SICp composites

Jayashree, P. K., Sharma, S. S. & Shetty, R., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 89-93 5 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ferrite-martensite dual phase treatment of AISI 1040 steel and mechanical characterization

Gurumurthy, B. M., Sharma, S. S. & Kini, A. U., 01-01-2017, Advanced Materials and Engineering Materials VI - 6th ICAMEM. Trans Tech Publications Ltd, p. 280-283 4 p. (Key Engineering Materials; vol. 748 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

FRP-Nanoclay hybrid composites: A review

Shettar, M., Kini, A., Sharma, S. & Hiremath, P., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 146-150 5 p. (Materials Science Forum; vol. 904 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Citations (Scopus)

Influence of spheroidizing heat treatment on mechanical properties of EN47 steel

Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 136-139 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Investigation on effect of nano-fillers on mechanical properties of epoxy based composites using ANOVA

Shettar, M., Hiremath, P., Kini, A. & Sharma, S., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 137-141 5 p. (Materials Science Forum; vol. 904 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Metallography & bulk hardness of artificially aged Al6061-B4C-SiC stir cast hybrid composites

Sharma, S. S., Jagannath, K., Prabhu, P. R., Gowri, S., Harisha, S. R. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 140-143 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Microstructure and fracture behaviour of two stage stir cast Al6061-SiC composites

Gowri Shankar, M. C., Sharma, S. S., Achutha Kini, U., Hiremath, P. & Gurumurthy, 01-01-2017, In : Journal of Materials and Environmental Science. 8, 1, p. 257-263 7 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Process optimization on hardness of precipitation hardened Al6061 alloy using design of experiments

Shankar, G., Achutha Kini, U. & Sharma, S. S., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 27-32 6 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Spheroidize annealing and mechanical property evaluation of AISI 1040 steel

Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 3-8 6 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
13 Citations (Scopus)
2019
5 Citations (Scopus)
Open Access
2 Citations (Scopus)

An integrated approach of CCD-TOPSIS-RSM for optimizing the marine grade GFRP drilling process parameters

Bhat, R., Mohan, N., Sharma, S., Shandilya, M. & Jayachandran, K., 01-01-2019, In : Materials Today: Proceedings. 19, p. 307-311 5 p.

Research output: Contribution to journalConference article

3 Citations (Scopus)
1 Citation (Scopus)
7 Citations (Scopus)

Epoxy-clay nanocomposite coatings: A review on synthesis and characterization

Muralishwara, K., Kini, U. A. & Sharma, S., 12-06-2019, In : Materials Research Express. 6, 8, 082007.

Research output: Contribution to journalReview article

4 Citations (Scopus)
4 Citations (Scopus)
Open Access
1 Citation (Scopus)

Interactive study on phase morphology and mechanical characteristics of diffusion annealed and age hardened Al7075-steel powder reinforced metal matrix composites

Bhat, R., Sharma, S., Gowrishankar, M. C., Shettar, M., Kartik, B. M. & Kenny, V., 01-01-2019, In : Materials Research Express. 6, 1, 016508.

Research output: Contribution to journalArticle

1 Citation (Scopus)
1 Citation (Scopus)

Investigation on effect of cold soaking on the properties of nanoclay-GFRP composite

Kini, U. A., Shettar, M., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 01-01-2019, In : Materials Research Express. 6, 1, 015206.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Mechanical characterization and microstructural analysis of AISI 4340 ferrite-martensite dual phase steel

Gurumurthy, B. M., Sharma, S., Ramakrishna Vikas, S. & Achutha Kini, U., 01-01-2019, In : International Journal of Mechanical Engineering and Robotics Research. 8, 4, p. 553-558 6 p.

Research output: Contribution to journalArticle

Mechanical characterization and optimization of heat treatment parameters of manganese alloyed austempered ductile iron

Hegde, A., Sharma, S. & Sadanand, R. V., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4356-4367 12 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Mechanical characterization of heat treated Al2219 hybrid composites

Gowrishankar, M. C., Sharma, S., Pavan, B. K., Kiran, K., Rajendra, K., Hiremath, P. & Shettar, M., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4380-4389 10 p.

Research output: Contribution to journalArticle

Mechanical properties-morphology corroboration of spheroidized AISI1040 steel

Harisha, S. R., Sharma, S., Kini, U. A., Sharma, A. & Joshi, N., 14-06-2019, In : Materials Research Express. 6, 8, 0865G8.

Research output: Contribution to journalArticle

Mechanical testing and microstructure characterization of glass fiber reinforced isophthalic polyester composites

Bhat, R., Mohan, N., Sharma, S., Pratap, A., Keni, A. P. & Sodani, D., 01-07-2019, In : Journal of Materials Research and Technology. 8, 4, p. 3653-3661 9 p.

Research output: Contribution to journalArticle

Open Access
9 Citations (Scopus)

Multiple response optimisation of process parameters during drilling of GFRP composite with a solid carbide twist drill

Bhat, R., Mohan, N., Sharma, S., Pai, D. & Kulkarni, S., 2019, In : Materials Today: Proceedings. 28, p. 2039-2046 8 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Multi-response optimization of the thrust force, torque and surface roughness in drilling of glass fiber reinforced polyester composite using GRA-RSM

Bhat, R., Mohan, N., Sharma, S., Agarwal, R. A., Rathi, A. & Subudhi, K. A., 01-01-2019, In : Materials Today: Proceedings. 19, p. 333-338 6 p.

Research output: Contribution to journalConference article

4 Citations (Scopus)

Multi response parametric optimisation in machining of marine application based GFRP composite with HSS drill: Application of TOPSIS approach

Bhat, R., Mohan, N., Sharma, S., Kini, A. U., Shivakumar, S. & Naik, N., 2019, In : Materials Today: Proceedings. 28, p. 2077-2083 7 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)
1 Citation (Scopus)

Predictive analysis of peel up delamination in glass fibre reinforced polyester composite drilling

Bhat, R., Mohan, N., Kulkarni, S. M. & Sharma, S., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 694-702 9 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Prior solutionising deformation consequence on the aging characteristics of steel powder reinforced al 7075 composites

Rajesh, Sharma, S. S., Gowrishankar, M. C., Shettar, M., Hiremath, P. & Hegde, A., 09-2019, In : International Journal of Recent Technology and Engineering. 8, 2 Special Issue 11, p. 2256-2261 6 p.

Research output: Contribution to journalArticle

Sliding wear resistance and microhardness of epoxy clay nanocomposite coatings

Muralishwara, K., Achutha Kini, U., Sharma, S. & Hindi, J., 01-10-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 919-930 12 p., IJMPERDOCT201981.

Research output: Contribution to journalArticle

Study on tensile strength on artificially aged Al-Mg-Si alloy using Taguchi’s technique

Gowri Shankar, M. C., Shivaprakash, Y. M., Jayashree, P. K., Gurumurthy, B. M. & Sharma, S., 01-01-2019, In : International Journal of Mechanical Engineering and Technology. 10, 1, p. 1312-1320 9 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
6 Citations (Scopus)
Open Access
1 Citation (Scopus)
2020

Effect of heat treatment and inhibitor on corrosion behavior of AISI 4140 steel

Bhagyalaxmi, Sharma, S. & Kini, U. A., 01-01-2020, In : International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 87-100 14 p., IJMPERDAPR20208.

Research output: Contribution to journalArticle

Effect of post carburizing treatments on residual stress distribution in plain carbon and alloy steels- A numerical analysis

Hiremath, P., Sharma, S., Gowrishankar, M. C., Shettar, M. & Gurumurthy, B. M., 2020, In : Journal of Materials Research and Technology. 9, 4, p. 8439-8450 12 p.

Research output: Contribution to journalArticle

Open Access

Experimental validity on the casting characteristics of stir cast aluminium composites

Gowrishankar, M. C., Hiremath, P., Shettar, M., Sharma, S. & Satish Rao, U., 01-01-2020, (Accepted/In press) In : Journal of Materials Research and Technology.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)