Find Research Outputs

Search results

• 2016

  Characteristic study and comparison of different hardening methods on low-alloy medium-carbon spring steel

  Mehta, D. B., Sharma, S. S., Gurumurthy, B. M., Kishan Bairy, S., Dsouza, E. J. & Mendonca, A. P., 01-03-2016, In: International Journal of Applied Engineering Research. 11, 2, p. 1542-1547 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Hardening
  • Carbon
  • Steel
  • Heat treatment
  • Phase composition

• Influence of artificial aging on the stir cast Al6061-SiC metal matrix composites under different aging conditions

  Shankar, G., Sharma, S. S., Kini, A., Praksh, S. & Gurumurthy, 01-01-2016, In: International Journal of Technology. 7, 6, p. 1000-1008 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Wear Resistance
  • Matrix
  • Metals
  • Aging of materials
  • Hardness
  6 Citations (Scopus)

• Study of Mechanical Properties of Dual Phase EN19 Steel (AISI4140)

  Gurumurthy, Sharma, S. S., Gowrishankar, Sowmith, Abhishek & Devar, A., 01-10-2016, In: Indian Journal of Science and Technology. 9, 37, 97422.

  Research output: Contribution to journal › Article › peer-review

  • Dual phase steel
  • Heat treatment
  • Hardness
  • Mechanical properties
  • Wear resistance
  2 Citations (Scopus)

• Study of wear behavior and mechanical mixed layer on artificial aged Al6061 composite reinforced with B₄C particles

  Shankar, G., Sharma, S. S., Kini, A., Jayashree, P. K. & Gurumurthy, B. M., 01-03-2016, In: Indian Journal of Science and Technology. 9, 12, 88073.

  Research output: Contribution to journal › Article › peer-review

  • composite materials
  • hardness
  • precipitates
  • iron
  • boron carbides
  3 Citations (Scopus)

• Study on dual-phase structure of AISI4140 steel

  Gurumurthy, B. M., Sharma, S. S., Shankar, M. C. G., Walia, R. & Agarwal, T., 01-09-2016, In: Indian Journal of Science and Technology. 9, 33, 93526.

  Research output: Contribution to journal › Article › peer-review

  • steels
  • normalizing
  • pretreatment
  • impact resistance
  • bainite
  2 Citations (Scopus)

• Surface Improvement of Shafts by Turn-Assisted Deep Cold Rolling Process

  Prabhu, R., Sharma, S. S., Jagannath, K., Kumar, K. & Kulkarni, S. M., 03-10-2016, In: MATEC Web of Conferences. 77, 10006.

  Research output: Contribution to journal › Conference article › peer-review

  • Cold rolling
  • Steel
  • Residual stresses
  • Compressive stress
  • X ray diffraction
  2 Citations (Scopus)
• 2019

  A comprehensive study of glass fibre reinforced polymer (GFRP) drilling

  Mohan, N., Sharma, S. & Bhat, R., 01-02-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 1, p. 1-10 10 p.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Glass fibers
  • Polymers
  • Drilling
  • Machining
  5 Citations (Scopus)

• Aging kinetics and microstructural features of Al6061-SiC+B₄C stir cast hybrid composites

  Sathyashankarasharma, Gurumurthy, Gowrishankar, Kini, A., Shettar, M. & Hiremath, P., 31-12-2019, In: International Journal of Automotive and Mechanical Engineering. 16, 4, p. 7211-7224 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Aging of materials
  • Composite materials
  • Intermetallics
  • Reinforcement
  • Hardness
  3 Citations (Scopus)

• An integrated approach of CCD-TOPSIS-RSM for optimizing the marine grade GFRP drilling process parameters

  Bhat, R., Mohan, N., Sharma, S., Shandilya, M. & Jayachandran, K., 01-01-2019, In: Materials Today: Proceedings. 19, p. 307-311 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Polyesters
  • Glass fibers
  • Drilling
  • Delamination
  3 Citations (Scopus)

• Effect of carburization on microstructure of low carbon steel and the influence of process parameters on its tribological behavior

  Hiremath, P., Sharma, S., Gowrishankar, M. C., Shettar, M., Kowshik, C. S. S. & Naik, N., 01-06-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 718-725 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Low carbon steel
  • Microstructure
  • Wear of materials
  • Case hardening
  1 Citation (Scopus)

• Effect of hygrothermal aging on the mechanical properties of nanoclay-glass fiber-epoxy composite and optimization using full factorial design

  Kini, U. A., Shettar, M., Sharma, S., Hiremath, P., Gowrishankar, M. C., Hegde, A. & Siddhartha, D., 20-03-2019, In: Materials Research Express. 6, 6, 065311.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Glass fibers
  • Aging of materials
  • Mechanical properties
  • Bending strength
  7 Citations (Scopus)

• Epoxy-clay nanocomposite coatings: A review on synthesis and characterization

  Muralishwara, K., Kini, U. A. & Sharma, S., 12-06-2019, In: Materials Research Express. 6, 8, 082007.

  Research output: Contribution to journal › Review article › peer-review

  • Clay
  • Nanocomposites
  • Thermodynamic stability
  • Characterization (materials science)
  • Agglomeration
  5 Citations (Scopus)

• Experimental investigation on the tensile and flexural strength of nano-polymer composites

  Shettar, M., Kini, U. A., Sharma, S. & Hiremath, P., 01-09-2019, In: International Journal of Mechanical Engineering and Robotics Research. 8, 5, p. 702-707 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Bending strength
  • Tensile strength
  • Polymers
  • Glass fibers
  • Composite materials

• Influence of austenite and ferrite stabilizers on the microstructure and related mechanical properties of carburized steels

  Sharma, S., Hiremath, P., Gowrishankar, M. C. & Shettar, M., 01-01-2019, In: International Journal of Mechanical Engineering and Technology. 10, 1, p. 1235-1245 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Austenite
  • Ferrite
  • Microstructure
  • Mechanical properties
  • Steel
  4 Citations (Scopus)

• Influence of coconut shell powder carburizing medium and sodium carbonate energizer on carbon diffusion and hardness of pack carburized steels

  Hiremath, P., Sharma, S., Gowrishankar, M. C., Shettar, M. & Seregar, J., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 677-685 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • sodium carbonate
  • Sodium Carbonate
  • Carburizing
  • Steel
  • Powders
  1 Citation (Scopus)

• Interactive study on phase morphology and mechanical characteristics of diffusion annealed and age hardened Al7075-steel powder reinforced metal matrix composites

  Bhat, R., Sharma, S., Gowrishankar, M. C., Shettar, M., Kartik, B. M. & Kenny, V., 01-01-2019, In: Materials Research Express. 6, 1, 016508.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Age hardening
  • Powders
  • Carbon steel
  • Metals
  1 Citation (Scopus)

• Investigation and optimization of thermal shock effects on the properties and microstructure of Nanoclay-Glass Fiber Reinforced Epoxy Composites

  Shettar, M., Achutha Kini, U., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 11-09-2019, In: Materials Research Express. 6, 10, 105360.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Thermal shock
  • Glass fibers
  • Microstructure
  • Composite materials
  1 Citation (Scopus)

• Investigation on effect of cold soaking on the properties of nanoclay-GFRP composite

  Kini, U. A., Shettar, M., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 01-01-2019, In: Materials Research Express. 6, 1, 015206.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Glass fibers
  • Polymers
  • Bending strength
  • Tensile strength
  7 Citations (Scopus)

• Mechanical characterization and microstructural analysis of AISI 4340 ferrite-martensite dual phase steel

  Gurumurthy, B. M., Sharma, S., Ramakrishna Vikas, S. & Achutha Kini, U., 01-01-2019, In: International Journal of Mechanical Engineering and Robotics Research. 8, 4, p. 553-558 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Dual phase steel
  • Martensite
  • Ferrite
  • Toughness
  • Tensile strength

• Mechanical characterization and optimization of heat treatment parameters of manganese alloyed austempered ductile iron

  Hegde, A., Sharma, S. & Sadanand, R. V., 01-03-2019, In: Journal of Mechanical Engineering and Sciences. 13, 1, p. 4356-4367 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Nodular iron
  • Manganese
  • Characterization (materials science)
  • Heat treatment
  • Hardness
  1 Citation (Scopus)

• Mechanical characterization of heat treated Al2219 hybrid composites

  Gowrishankar, M. C., Sharma, S., Pavan, B. K., Kiran, K., Rajendra, K., Hiremath, P. & Shettar, M., 01-03-2019, In: Journal of Mechanical Engineering and Sciences. 13, 1, p. 4380-4389 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Characterization (materials science)
  • Composite materials
  • Hot Temperature
  • Impact resistance
  • Tensile strength

• Mechanical properties-morphology corroboration of spheroidized AISI1040 steel

  Harisha, S. R., Sharma, S., Kini, U. A., Sharma, A. & Joshi, N., 14-06-2019, In: Materials Research Express. 6, 8, 0865G8.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Heat treatment
  • Mechanical properties
  • Machinability
  • Annealing

• Mechanical testing and microstructure characterization of glass fiber reinforced isophthalic polyester composites

  Bhat, R., Mohan, N., Sharma, S., Pratap, A., Keni, A. P. & Sodani, D., 01-07-2019, In: Journal of Materials Research and Technology. 8, 4, p. 3653-3661 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • fiberglass
  • Polyesters
  • Mechanical testing
  • Glass fibers
  • Laminates
  10 Citations (Scopus)

• Multi-response optimization of the thrust force, torque and surface roughness in drilling of glass fiber reinforced polyester composite using GRA-RSM

  Bhat, R., Mohan, N., Sharma, S., Agarwal, R. A., Rathi, A. & Subudhi, K. A., 01-01-2019, In: Materials Today: Proceedings. 19, p. 333-338 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Polyesters
  • Glass fibers
  • Drilling
  • Surface roughness
  6 Citations (Scopus)

• Precipitation hardening effect on the aging characteristics of two step stir cast Al7075-GCI_p composites

  Hindi, J., Achutha Kini, U. & Sharma, S. S., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 670-676 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Cast iron
  • Aging of materials
  • Hardness
  • Composite materials
  1 Citation (Scopus)

• Predictive analysis of peel up delamination in glass fibre reinforced polyester composite drilling

  Bhat, R., Mohan, N., Kulkarni, S. M. & Sharma, S., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 694-702 9 p.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Predictive analytics
  • Polyesters
  • Delamination
  • Glass fibers
  2 Citations (Scopus)

• Prior solutionising deformation consequence on the aging characteristics of steel powder reinforced al 7075 composites

  Rajesh, Sharma, S. S., Gowrishankar, M. C., Shettar, M., Hiremath, P. & Hegde, A., 09-2019, In: International Journal of Recent Technology and Engineering. 8, 2 Special Issue 11, p. 2256-2261 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Powders
  • Aging of materials
  • Hardness
  • Reinforcement

• Sliding wear resistance and microhardness of epoxy clay nanocomposite coatings

  Muralishwara, K., Achutha Kini, U., Sharma, S. & Hindi, J., 01-10-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 919-930 12 p., IJMPERDOCT201981.

  Research output: Contribution to journal › Article › peer-review

  • Clay
  • Nanocomposites
  • Microhardness
  • Sonication
  • Wear resistance

• Study on tensile strength on artificially aged Al-Mg-Si alloy using Taguchi’s technique

  Gowri Shankar, M. C., Shivaprakash, Y. M., Jayashree, P. K., Gurumurthy, B. M. & Sharma, S., 01-01-2019, In: International Journal of Mechanical Engineering and Technology. 10, 1, p. 1312-1320 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Tensile strength
  • Aging of materials
  • Dispersion hardening
  • Cold working
  1 Citation (Scopus)

• Study on the mechanical properties of nanoclay-epoxy composites under different hygrothermal aging conditions

  Shettar, M., Kini, U. A., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 07-06-2019, In: Materials Research Express. 6, 8, 085333.

  Research output: Contribution to journal › Article › peer-review

  • ASTM standards
  • Aging of materials
  • Water
  • Mechanical properties
  • Composite materials
  6 Citations (Scopus)

• Surface roughness analysis in the drilling of carbon fiber/epoxy composite laminates using hybrid Taguchi-Response experimental design

  Shahabaz, S. M., Shetty, N., Shetty, S. D. & Sharma, S. S., 01-01-2019, In: Materials Research Express. 7, 1, 015322.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Carbon Fiber
  • Carbon fibers
  • Design of experiments
  • Laminates
  • Drilling
  1 Citation (Scopus)

• Wear related study on the precipitation hardened al7075-grey cast iron particulate reinforced composites

  Achutha Kini, U., Hindi, J. & Sharma, S. S., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 703-708 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Cast iron
  • Reinforcement
  • Wear of materials
  • Composite materials
  • Wear resistance