Find Research outputs

Search results

• 2020

  Analysis on magnetocaloric and structural properties of heusler alloys used in magnetic refrigeration

  Sandeep Nambiar, S., Murthy, B. R. N., Sharma, S. & Prasanna, A. A., 08-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 4, p. 29-46 18 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Magnetic refrigeration
  • Structural properties
  • Martensitic transformations
  • Temperature
  • Refrigerants

• Coated and uncoated reinforcements metal matrix composites characteristics and applications–A critical review

  B M, K., M C, G., Sharma, S., Hiremath, P., Shettar, M. & Shetty, N., 2020, In: Cogent Engineering. 7, 1, 1856758.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Metals
  • Reinforcement
  • Composite materials
  • Nickel
  • Copper

• Effect of heat treatment and inhibitor on corrosion behavior of AISI 4140 steel

  Bhagyalaxmi, Sharma, S. & Kini, U. A., 01-01-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 87-100 14 p., IJMPERDAPR20208.

  Research output: Contribution to journal › Article › peer-review

  • Thioureas
  • Thiourea
  • Corrosion inhibitors
  • Steel
  • Heat treatment

• Effect of post carburizing treatments on residual stress distribution in plain carbon and alloy steels- A numerical analysis

  Hiremath, P., Sharma, S., Gowrishankar, M. C., Shettar, M. & Gurumurthy, B. M., 2020, In: Journal of Materials Research and Technology. 9, 4, p. 8439-8450 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Carburizing
  • Steel
  • Alloy steel
  • Carbon steel
  • Numerical analysis

• Experimental validity on the casting characteristics of stir cast aluminium composites

  Gowrishankar, M. C., Hiremath, P., Shettar, M., Sharma, S. & Satish Rao, U., 01-01-2020, In: Journal of Materials Research and Technology.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Aluminum
  • Casting
  • Composite materials
  • Reinforcement
  • Aluminum alloys
  5 Citations (Scopus)

• Hygrothermal chamber aging effect on mechanical behavior and morphology of glass fiber-epoxy-nanoclay composites

  Shettar, M., Kini, U. A., Sharma, S., Hiremath, P. & Gowrishankar, G. C. G., 01-01-2020, In: Materials Research Express. 7, 1, 015318.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • fiberglass
  • Glass fibers
  • Aging of materials
  • Composite materials
  • Casting
  4 Citations (Scopus)

• Influence of homogenization and aging on tensile strength and fracture behavior of TIG welded Al6061-SiC composites

  Jayashree, P. K., Gowrishankar, M. C., Sharma, S., Shetty, R., Shettar, M. & Hiremath, P., 01-01-2020, In: Journal of Materials Research and Technology.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Tensile strength
  • Aging of materials
  • Composite materials
  • Hardness
  • Metals

• Mechanical characterization of dual phase and austempered aisi 1040 normalized steel

  Gurumurthy, B. M., Shivaprakash, Y. M., Sharma, S., Achutha Kini, U. & Mathur, R., 01-01-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 247-258 12 p., IJMPERDAPR202022.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Carbon steel
  • Mechanical properties
  • Dual phase steel
  • Bainite

• Mechanical property association of dual phase and austempered aisi 4140 normalized steel

  Sharma, S., Gurumurthy, B. M., Achutha Kini, U., Gowrishankar, M. C. & Shivaprakash, Y. M., 2020, Frontiers of Composite Materials IV. Martin, D. & Perova, T. (eds.). Trans Tech Publications Ltd, p. 174-179 6 p. (Materials Science Forum; vol. 995 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Martensite
  • Steel
  • Impact strength
  • Ferrite
  • Tensile strength

• Microstructure authentication on mechanical property of medium carbon Low alloy duplex steels

  Gurumurthy, B. M., Gowrishankar, M. C., Sharma, S., Kini, A., Shettar, M. & Hiremath, P., 01-01-2020, In: Journal of Materials Research and Technology.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Duplex stainless steel
  • Alloy steel
  • Martensite
  • Carbon
  • Authentication
  1 Citation (Scopus)

• Multiple response optimisation of process parameters during drilling of GFRP composite with a solid carbide twist drill

  Bhat, R., Mohan, N., Sharma, S., Pai, D. & Kulkarni, S., 01-01-2020, In: Materials Today: Proceedings. 28, p. 2039-2046 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Glass fibers
  • Carbides
  • Polymers
  • Drilling
  1 Citation (Scopus)

• Multi-response optimization of the turn-assisted deep cold rolling process parameters for enhanced surface characteristics and residual stress of AISI 4140 steel shafts

  Prabhu, P. R., Kulkarni, S. M. & Sharma, S., 2020, In: Journal of Materials Research and Technology. 9, 5, p. 11402-11423 22 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Cold rolling
  • Steel
  • Residual stresses
  • Fatigue of materials
  • Surface hardening
  1 Citation (Scopus)

• Multi response parametric optimisation in machining of marine application based GFRP composite with HSS drill: Application of TOPSIS approach

  Bhat, R., Mohan, N., Sharma, S., Kini, A. U., Shivakumar, S. & Naik, N., 01-01-2020, In: Materials Today: Proceedings. 28, p. 2077-2083 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Marine applications
  • fiberglass
  • Machining
  • Glass fibers
  • Composite materials
  2 Citations (Scopus)

• Post solutionising rolling sway on the precipitation behaviour of eutectoid steel powder reinforced al7075 ternary alloy composites

  Rajesh, Sharma, S., Gowrishankar, M. C., Shettar, M., Hiremath, P. & Hegde, A., 2020, Frontiers of Composite Materials IV. Martin, D. & Perova, T. (eds.). Trans Tech Publications Ltd, p. 9-14 6 p. (Materials Science Forum; vol. 995 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Ternary alloys
  • ternary alloys
  • Powders
  • Carbon steel
  • Aging of materials

• Sliding Wear Behaviour of Nickel-Coated Short Fibre-Reinforced Al7075 Composites

  Kumar, N., Kiran, M. D., Sharma, S. S., Ravikiran Kamath, B. & Veeresha, R. K., 01-10-2020, In: Journal of Failure Analysis and Prevention.

  Research output: Contribution to journal › Article › peer-review

  • Carbon Fiber
  • Nickel
  • Carbon fibers
  • Wear of materials
  • Fibers

• Study of cycle time reduction and assembly process improvement for various electric stackers

  Hiremath, P., Kumara, K., Sharma, S., Joseph, C. & Gowrishankar, M. C., 04-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 779-792 14 p., IJMPERDAPR202078.

  Research output: Contribution to journal › Article › peer-review

  • Standardization
  • Materials handling
  • Welding
  • Pipe fittings
  • Hydraulic actuators

• Surface Properties and Corrosion Behavior of Turn-Assisted Deep-Cold-Rolled AISI 4140 Steel

  Prabhu, P. R., Prabhu, D., Sharma, S. & Kulkarni, S. M., 01-09-2020, In: Journal of Materials Engineering and Performance.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Steel
  • Surface properties
  • Corrosion
  • Corrosion rate
  • Residual stresses

• Tensile fractography of artificially aged al6061-sic+b4c hybrid composites

  Sharma, S., Gowrishankar, M. C., Hiremath, P., Shettar, M. & Gurumurthy, B. M., 2020, Frontiers of Composite Materials IV. Martin, D. & Perova, T. (eds.). Trans Tech Publications Ltd, p. 3-8 6 p. (Materials Science Forum; vol. 995 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • silicon carbide
  • hybrid composites
  • fractography
  • Fractography
  • Silicon carbide
• 2019

  A comprehensive study of glass fibre reinforced polymer (GFRP) drilling

  Mohan, N., Sharma, S. & Bhat, R., 01-02-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 1, p. 1-10 10 p.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Glass fibers
  • Polymers
  • Drilling
  • Machining
  5 Citations (Scopus)

• Aging kinetics and microstructural features of Al6061-SiC+B₄C stir cast hybrid composites

  Sathyashankarasharma, Gurumurthy, Gowrishankar, Kini, A., Shettar, M. & Hiremath, P., 31-12-2019, In: International Journal of Automotive and Mechanical Engineering. 16, 4, p. 7211-7224 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Aging of materials
  • Composite materials
  • Intermetallics
  • Reinforcement
  • Hardness
  3 Citations (Scopus)

• An integrated approach of CCD-TOPSIS-RSM for optimizing the marine grade GFRP drilling process parameters

  Bhat, R., Mohan, N., Sharma, S., Shandilya, M. & Jayachandran, K., 01-01-2019, In: Materials Today: Proceedings. 19, p. 307-311 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Polyesters
  • Glass fibers
  • Drilling
  • Delamination
  3 Citations (Scopus)

• Effect of carburization on microstructure of low carbon steel and the influence of process parameters on its tribological behavior

  Hiremath, P., Sharma, S., Gowrishankar, M. C., Shettar, M., Kowshik, C. S. S. & Naik, N., 01-06-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 718-725 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Low carbon steel
  • Microstructure
  • Wear of materials
  • Case hardening
  1 Citation (Scopus)

• Effect of hygrothermal aging on the mechanical properties of nanoclay-glass fiber-epoxy composite and optimization using full factorial design

  Kini, U. A., Shettar, M., Sharma, S., Hiremath, P., Gowrishankar, M. C., Hegde, A. & Siddhartha, D., 20-03-2019, In: Materials Research Express. 6, 6, 065311.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Glass fibers
  • Aging of materials
  • Mechanical properties
  • Bending strength
  9 Citations (Scopus)

• Epoxy-clay nanocomposite coatings: A review on synthesis and characterization

  Muralishwara, K., Kini, U. A. & Sharma, S., 12-06-2019, In: Materials Research Express. 6, 8, 082007.

  Research output: Contribution to journal › Review article › peer-review

  • Clay
  • Nanocomposites
  • Thermodynamic stability
  • Characterization (materials science)
  • Agglomeration
  5 Citations (Scopus)

• Experimental investigation on the tensile and flexural strength of nano-polymer composites

  Shettar, M., Kini, U. A., Sharma, S. & Hiremath, P., 01-09-2019, In: International Journal of Mechanical Engineering and Robotics Research. 8, 5, p. 702-707 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Bending strength
  • Tensile strength
  • Polymers
  • Glass fibers
  • Composite materials

• Influence of austenite and ferrite stabilizers on the microstructure and related mechanical properties of carburized steels

  Sharma, S., Hiremath, P., Gowrishankar, M. C. & Shettar, M., 01-01-2019, In: International Journal of Mechanical Engineering and Technology. 10, 1, p. 1235-1245 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Austenite
  • Ferrite
  • Microstructure
  • Mechanical properties
  • Steel
  4 Citations (Scopus)

• Influence of coconut shell powder carburizing medium and sodium carbonate energizer on carbon diffusion and hardness of pack carburized steels

  Hiremath, P., Sharma, S., Gowrishankar, M. C., Shettar, M. & Seregar, J., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 677-685 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • sodium carbonate
  • Sodium Carbonate
  • Carburizing
  • Steel
  • Powders
  1 Citation (Scopus)

• Interactive study on phase morphology and mechanical characteristics of diffusion annealed and age hardened Al7075-steel powder reinforced metal matrix composites

  Bhat, R., Sharma, S., Gowrishankar, M. C., Shettar, M., Kartik, B. M. & Kenny, V., 01-01-2019, In: Materials Research Express. 6, 1, 016508.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Age hardening
  • Powders
  • Carbon steel
  • Metals
  1 Citation (Scopus)

• Investigation and optimization of thermal shock effects on the properties and microstructure of Nanoclay-Glass Fiber Reinforced Epoxy Composites

  Shettar, M., Achutha Kini, U., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 11-09-2019, In: Materials Research Express. 6, 10, 105360.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Thermal shock
  • Glass fibers
  • Microstructure
  • Composite materials
  2 Citations (Scopus)

• Investigation on effect of cold soaking on the properties of nanoclay-GFRP composite

  Kini, U. A., Shettar, M., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 01-01-2019, In: Materials Research Express. 6, 1, 015206.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Glass fibers
  • Polymers
  • Bending strength
  • Tensile strength
  8 Citations (Scopus)

• Mechanical characterization and microstructural analysis of AISI 4340 ferrite-martensite dual phase steel

  Gurumurthy, B. M., Sharma, S., Ramakrishna Vikas, S. & Achutha Kini, U., 01-01-2019, In: International Journal of Mechanical Engineering and Robotics Research. 8, 4, p. 553-558 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Dual phase steel
  • Martensite
  • Ferrite
  • Toughness
  • Tensile strength

• Mechanical characterization and optimization of heat treatment parameters of manganese alloyed austempered ductile iron

  Hegde, A., Sharma, S. & Sadanand, R. V., 01-03-2019, In: Journal of Mechanical Engineering and Sciences. 13, 1, p. 4356-4367 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Nodular iron
  • Manganese
  • Characterization (materials science)
  • Heat treatment
  • Hardness
  1 Citation (Scopus)

• Mechanical characterization of heat treated Al2219 hybrid composites

  Gowrishankar, M. C., Sharma, S., Pavan, B. K., Kiran, K., Rajendra, K., Hiremath, P. & Shettar, M., 01-03-2019, In: Journal of Mechanical Engineering and Sciences. 13, 1, p. 4380-4389 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Characterization (materials science)
  • Composite materials
  • Hot Temperature
  • Impact resistance
  • Tensile strength

• Mechanical properties-morphology corroboration of spheroidized AISI1040 steel

  Harisha, S. R., Sharma, S., Kini, U. A., Sharma, A. & Joshi, N., 14-06-2019, In: Materials Research Express. 6, 8, 0865G8.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Heat treatment
  • Mechanical properties
  • Machinability
  • Annealing

• Mechanical testing and microstructure characterization of glass fiber reinforced isophthalic polyester composites

  Bhat, R., Mohan, N., Sharma, S., Pratap, A., Keni, A. P. & Sodani, D., 01-07-2019, In: Journal of Materials Research and Technology. 8, 4, p. 3653-3661 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • fiberglass
  • Polyesters
  • Mechanical testing
  • Glass fibers
  • Laminates
  12 Citations (Scopus)

• Multi-response optimization of the thrust force, torque and surface roughness in drilling of glass fiber reinforced polyester composite using GRA-RSM

  Bhat, R., Mohan, N., Sharma, S., Agarwal, R. A., Rathi, A. & Subudhi, K. A., 01-01-2019, In: Materials Today: Proceedings. 19, p. 333-338 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Polyesters
  • Glass fibers
  • Drilling
  • Surface roughness
  6 Citations (Scopus)

• Precipitation hardening effect on the aging characteristics of two step stir cast Al7075-GCI_p composites

  Hindi, J., Achutha Kini, U. & Sharma, S. S., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 670-676 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Cast iron
  • Aging of materials
  • Hardness
  • Composite materials
  1 Citation (Scopus)

• Predictive analysis of peel up delamination in glass fibre reinforced polyester composite drilling

  Bhat, R., Mohan, N., Kulkarni, S. M. & Sharma, S., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 694-702 9 p.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Predictive analytics
  • Polyesters
  • Delamination
  • Glass fibers
  2 Citations (Scopus)

• Prior solutionising deformation consequence on the aging characteristics of steel powder reinforced al 7075 composites

  Rajesh, Sharma, S. S., Gowrishankar, M. C., Shettar, M., Hiremath, P. & Hegde, A., 09-2019, In: International Journal of Recent Technology and Engineering. 8, 2 Special Issue 11, p. 2256-2261 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Powders
  • Aging of materials
  • Hardness
  • Reinforcement

• Sliding wear resistance and microhardness of epoxy clay nanocomposite coatings

  Muralishwara, K., Achutha Kini, U., Sharma, S. & Hindi, J., 01-10-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 919-930 12 p., IJMPERDOCT201981.

  Research output: Contribution to journal › Article › peer-review

  • Clay
  • Nanocomposites
  • Microhardness
  • Sonication
  • Wear resistance

• Study on tensile strength on artificially aged Al-Mg-Si alloy using Taguchi’s technique

  Gowri Shankar, M. C., Shivaprakash, Y. M., Jayashree, P. K., Gurumurthy, B. M. & Sharma, S., 01-01-2019, In: International Journal of Mechanical Engineering and Technology. 10, 1, p. 1312-1320 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Tensile strength
  • Aging of materials
  • Dispersion hardening
  • Cold working
  1 Citation (Scopus)

• Study on the mechanical properties of nanoclay-epoxy composites under different hygrothermal aging conditions

  Shettar, M., Kini, U. A., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 07-06-2019, In: Materials Research Express. 6, 8, 085333.

  Research output: Contribution to journal › Article › peer-review

  • ASTM standards
  • Aging of materials
  • Water
  • Mechanical properties
  • Composite materials
  7 Citations (Scopus)

• Surface roughness analysis in the drilling of carbon fiber/epoxy composite laminates using hybrid Taguchi-Response experimental design

  Shahabaz, S. M., Shetty, N., Shetty, S. D. & Sharma, S. S., 01-01-2019, In: Materials Research Express. 7, 1, 015322.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Carbon Fiber
  • Carbon fibers
  • Design of experiments
  • Laminates
  • Drilling
  1 Citation (Scopus)

• Wear related study on the precipitation hardened al7075-grey cast iron particulate reinforced composites

  Achutha Kini, U., Hindi, J. & Sharma, S. S., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 703-708 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Cast iron
  • Reinforcement
  • Wear of materials
  • Composite materials
  • Wear resistance
• 2017

  A review on finite element method for machining of composite materials

  Shetty, N., Shahabaz, S. M., Sharma, S. S. & Divakara Shetty, S., 15-09-2017, In: Composite Structures. 176, p. 790-802 13 p.

  Research output: Contribution to journal › Review article › peer-review

  • Drilling
  • Machining
  • Finite element method
  • Composite materials
  • Delamination
  44 Citations (Scopus)

• Effect of artificial aging on fracture behavior of Al6061-Silica (SiO₂) composites

  Jagannath, K., Sharma, S. S., Prabhu, P. R., Gowri Shankar, S. M. C. & Harisha, S. R., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 59-62 4 p. (Materials Science Forum; vol. 880).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Silicon Dioxide
  • Silica
  • Aging of materials
  • silicon dioxide
  • composite materials
  1 Citation (Scopus)

• Effect of homogenizing and age hardening on mechanical property enhancement of TIG welded Al6061 SIC_p composites

  Jayashree, P. K., Sharma, S. S. & Shetty, R., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 89-93 5 p. (Materials Science Forum; vol. 909 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Noble Gases
  • Tungsten
  • Age hardening
  • Inert gases
  • precipitation hardening

• Ferrite-martensite dual phase treatment of AISI 1040 steel and mechanical characterization

  Gurumurthy, B. M., Sharma, S. S. & Kini, A. U., 01-01-2017, Advanced Materials and Engineering Materials VI - 6th ICAMEM. Trans Tech Publications Ltd, p. 280-283 4 p. (Key Engineering Materials; vol. 748 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Martensite
  • Steel
  • Ferrite
  • Tempering
  • Impact resistance
  2 Citations (Scopus)

• FRP-Nanoclay hybrid composites: A review

  Shettar, M., Kini, A., Sharma, S. & Hiremath, P., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 146-150 5 p. (Materials Science Forum; vol. 904 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • hybrid composites
  • mechanical properties
  • Mechanical properties
  • Composite materials
  • Nanocomposites
  10 Citations (Scopus)

• Influence of spheroidizing heat treatment on mechanical properties of EN47 steel

  Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 136-139 4 p. (Materials Science Forum; vol. 880).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Steel
  • Heat treatment
  • heat treatment
  • Hardness
  • Tempering
  5 Citations (Scopus)