Analysis of additive in a liquid level process using multi sensor data fusion

K. V. Santhosh, Blessy Joy

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

This paper presents a technique for analyzing the amount of additives added to the liquid, whose level is to be controlled. The objective of the proposed work is to design a technique which will (i) measure level of liquid independent of solution, (ii) analyze the quantity of additives present in the solution and (iii) design a multi sensor framework to achieve objectives (i) and (ii). Capacitive Level Sensor (CLS) and Ultrasonic Level Sensor (ULS) are used for measurement of liquid level. Respective data conversion circuits are designed to convert output of both the sensor to a standard signal (voltage). For incorporation of Multi Sensor Data Fusion (MSDF) Joint Defense Labortory (JDL) framework is considered. Once the system is designed it is tested with data. Results obtained shows successful implementation of proposed work.

Original languageEnglish
Title of host publicationProceedings of the 10th International Conference on Intelligent Systems and Control, ISCO 2016
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)9781467378079
DOIs
Publication statusPublished - 31-10-2016
Event10th International Conference on Intelligent Systems and Control, ISCO 2016 - Coimbatore, India
Duration: 07-01-201608-01-2016

Conference

Conference10th International Conference on Intelligent Systems and Control, ISCO 2016
CountryIndia
CityCoimbatore
Period07-01-1608-01-16

Fingerprint

Multi-sensor Data Fusion
Sensor data fusion
Liquid
Sensor
Sensors
Liquids
Convert
Voltage
Output
Ultrasonics
Networks (circuits)
Electric potential
Design
Framework

All Science Journal Classification (ASJC) codes

  • Control and Optimization
  • Artificial Intelligence
  • Computer Networks and Communications

Cite this

Santhosh, K. V., & Joy, B. (2016). Analysis of additive in a liquid level process using multi sensor data fusion. In Proceedings of the 10th International Conference on Intelligent Systems and Control, ISCO 2016 [7726924] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ISCO.2016.7726924
Santhosh, K. V. ; Joy, Blessy. / Analysis of additive in a liquid level process using multi sensor data fusion. Proceedings of the 10th International Conference on Intelligent Systems and Control, ISCO 2016. Institute of Electrical and Electronics Engineers Inc., 2016.
@inproceedings{53e4514e2fff41e2a04ee25165a7020f,
title = "Analysis of additive in a liquid level process using multi sensor data fusion",
abstract = "This paper presents a technique for analyzing the amount of additives added to the liquid, whose level is to be controlled. The objective of the proposed work is to design a technique which will (i) measure level of liquid independent of solution, (ii) analyze the quantity of additives present in the solution and (iii) design a multi sensor framework to achieve objectives (i) and (ii). Capacitive Level Sensor (CLS) and Ultrasonic Level Sensor (ULS) are used for measurement of liquid level. Respective data conversion circuits are designed to convert output of both the sensor to a standard signal (voltage). For incorporation of Multi Sensor Data Fusion (MSDF) Joint Defense Labortory (JDL) framework is considered. Once the system is designed it is tested with data. Results obtained shows successful implementation of proposed work.",
author = "Santhosh, {K. V.} and Blessy Joy",
year = "2016",
month = "10",
day = "31",
doi = "10.1109/ISCO.2016.7726924",
language = "English",
booktitle = "Proceedings of the 10th International Conference on Intelligent Systems and Control, ISCO 2016",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
address = "United States",

}

Santhosh, KV & Joy, B 2016, Analysis of additive in a liquid level process using multi sensor data fusion. in Proceedings of the 10th International Conference on Intelligent Systems and Control, ISCO 2016., 7726924, Institute of Electrical and Electronics Engineers Inc., 10th International Conference on Intelligent Systems and Control, ISCO 2016, Coimbatore, India, 07-01-16. https://doi.org/10.1109/ISCO.2016.7726924

Analysis of additive in a liquid level process using multi sensor data fusion. / Santhosh, K. V.; Joy, Blessy.

Proceedings of the 10th International Conference on Intelligent Systems and Control, ISCO 2016. Institute of Electrical and Electronics Engineers Inc., 2016. 7726924.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Analysis of additive in a liquid level process using multi sensor data fusion

AU - Santhosh, K. V.

AU - Joy, Blessy

PY - 2016/10/31

Y1 - 2016/10/31

N2 - This paper presents a technique for analyzing the amount of additives added to the liquid, whose level is to be controlled. The objective of the proposed work is to design a technique which will (i) measure level of liquid independent of solution, (ii) analyze the quantity of additives present in the solution and (iii) design a multi sensor framework to achieve objectives (i) and (ii). Capacitive Level Sensor (CLS) and Ultrasonic Level Sensor (ULS) are used for measurement of liquid level. Respective data conversion circuits are designed to convert output of both the sensor to a standard signal (voltage). For incorporation of Multi Sensor Data Fusion (MSDF) Joint Defense Labortory (JDL) framework is considered. Once the system is designed it is tested with data. Results obtained shows successful implementation of proposed work.

AB - This paper presents a technique for analyzing the amount of additives added to the liquid, whose level is to be controlled. The objective of the proposed work is to design a technique which will (i) measure level of liquid independent of solution, (ii) analyze the quantity of additives present in the solution and (iii) design a multi sensor framework to achieve objectives (i) and (ii). Capacitive Level Sensor (CLS) and Ultrasonic Level Sensor (ULS) are used for measurement of liquid level. Respective data conversion circuits are designed to convert output of both the sensor to a standard signal (voltage). For incorporation of Multi Sensor Data Fusion (MSDF) Joint Defense Labortory (JDL) framework is considered. Once the system is designed it is tested with data. Results obtained shows successful implementation of proposed work.

UR - http://www.scopus.com/inward/record.url?scp=85007375275&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85007375275&partnerID=8YFLogxK

U2 - 10.1109/ISCO.2016.7726924

DO - 10.1109/ISCO.2016.7726924

M3 - Conference contribution

AN - SCOPUS:85007375275

BT - Proceedings of the 10th International Conference on Intelligent Systems and Control, ISCO 2016

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Santhosh KV, Joy B. Analysis of additive in a liquid level process using multi sensor data fusion. In Proceedings of the 10th International Conference on Intelligent Systems and Control, ISCO 2016. Institute of Electrical and Electronics Engineers Inc. 2016. 7726924 https://doi.org/10.1109/ISCO.2016.7726924