Analysis of drag and lift forces in different tailed ground effect vehicles

Pavan Hiremath, Manjunath Shettar, C. S. Suhas Kowshik, J. Rajath, P. D. Sukhesh

Research output: Contribution to journalArticle

Abstract

In recent days people are dependent highly on transportation and the demand for quicker modes of transportation are increasing day by day. Technological advances in the areas of roadways, airways and waterways have led to development of faster and efficient vehicles which has largely contributed in connecting people across the globe. This study deals with finding the effect of different forces acting on Ground Effect Vehicles. Initially three different tail models were considered and modeled in CATIA and then imported to ANSYS for further analysis. It was observed that the higher pressure at tips is a result of the shape of the GEV and it causes drag, since it is opposing the inlet flow. Lift is generated due to difference in pressures between top and bottom surfaces of the wing, which is a consequence of velocity difference. The pressure at top is much lesser that than bottom of the GEV, so lift is also generated. However, it was found from L/D ratio that V tail displayed higher response for the considered process parameters and boundary conditions.

Original languageEnglish
Pages (from-to)1399-1412
Number of pages14
JournalInternational Journal of Mechanical Engineering and Technology
Volume10
Issue number1
Publication statusPublished - 01-01-2019

Fingerprint

Air cushion vehicles
Drag
Inlet flow
Boundary conditions

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Cite this

@article{36024cc18728452ca2144ea16b60f747,
title = "Analysis of drag and lift forces in different tailed ground effect vehicles",
abstract = "In recent days people are dependent highly on transportation and the demand for quicker modes of transportation are increasing day by day. Technological advances in the areas of roadways, airways and waterways have led to development of faster and efficient vehicles which has largely contributed in connecting people across the globe. This study deals with finding the effect of different forces acting on Ground Effect Vehicles. Initially three different tail models were considered and modeled in CATIA and then imported to ANSYS for further analysis. It was observed that the higher pressure at tips is a result of the shape of the GEV and it causes drag, since it is opposing the inlet flow. Lift is generated due to difference in pressures between top and bottom surfaces of the wing, which is a consequence of velocity difference. The pressure at top is much lesser that than bottom of the GEV, so lift is also generated. However, it was found from L/D ratio that V tail displayed higher response for the considered process parameters and boundary conditions.",
author = "Pavan Hiremath and Manjunath Shettar and {Suhas Kowshik}, {C. S.} and J. Rajath and Sukhesh, {P. D.}",
year = "2019",
month = "1",
day = "1",
language = "English",
volume = "10",
pages = "1399--1412",
journal = "International Journal of Mechanical Engineering and Technology",
issn = "0976-6340",
publisher = "IAEME Publication",
number = "1",

}

Analysis of drag and lift forces in different tailed ground effect vehicles. / Hiremath, Pavan; Shettar, Manjunath; Suhas Kowshik, C. S.; Rajath, J.; Sukhesh, P. D.

In: International Journal of Mechanical Engineering and Technology, Vol. 10, No. 1, 01.01.2019, p. 1399-1412.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Analysis of drag and lift forces in different tailed ground effect vehicles

AU - Hiremath, Pavan

AU - Shettar, Manjunath

AU - Suhas Kowshik, C. S.

AU - Rajath, J.

AU - Sukhesh, P. D.

PY - 2019/1/1

Y1 - 2019/1/1

N2 - In recent days people are dependent highly on transportation and the demand for quicker modes of transportation are increasing day by day. Technological advances in the areas of roadways, airways and waterways have led to development of faster and efficient vehicles which has largely contributed in connecting people across the globe. This study deals with finding the effect of different forces acting on Ground Effect Vehicles. Initially three different tail models were considered and modeled in CATIA and then imported to ANSYS for further analysis. It was observed that the higher pressure at tips is a result of the shape of the GEV and it causes drag, since it is opposing the inlet flow. Lift is generated due to difference in pressures between top and bottom surfaces of the wing, which is a consequence of velocity difference. The pressure at top is much lesser that than bottom of the GEV, so lift is also generated. However, it was found from L/D ratio that V tail displayed higher response for the considered process parameters and boundary conditions.

AB - In recent days people are dependent highly on transportation and the demand for quicker modes of transportation are increasing day by day. Technological advances in the areas of roadways, airways and waterways have led to development of faster and efficient vehicles which has largely contributed in connecting people across the globe. This study deals with finding the effect of different forces acting on Ground Effect Vehicles. Initially three different tail models were considered and modeled in CATIA and then imported to ANSYS for further analysis. It was observed that the higher pressure at tips is a result of the shape of the GEV and it causes drag, since it is opposing the inlet flow. Lift is generated due to difference in pressures between top and bottom surfaces of the wing, which is a consequence of velocity difference. The pressure at top is much lesser that than bottom of the GEV, so lift is also generated. However, it was found from L/D ratio that V tail displayed higher response for the considered process parameters and boundary conditions.

UR - http://www.scopus.com/inward/record.url?scp=85061076680&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85061076680&partnerID=8YFLogxK

M3 - Article

VL - 10

SP - 1399

EP - 1412

JO - International Journal of Mechanical Engineering and Technology

JF - International Journal of Mechanical Engineering and Technology

SN - 0976-6340

IS - 1

ER -