Analysis of Sampling on Process Timing Parameters in a Networked Control System

K. V. Santhosh, Nathan Noronha Esilva

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This paper analyses the effect of network parameter on the performance of feedback control system. Effect of network parameters like transmission delay and quantizer delay on the output of the process system is shown, to derive its relation with the effect caused. Feedback control system consists of a proportional + integral controller, actuator, and a second order plant. Stabilized controller is placed on to a network. Time response parameters of the loop are analyzed by varying network parameters like transmission delay and quantizer delay. To offset the errors caused by these parameters it is essential to derive the relation. Regression analysis is used for the purpose of offset tuning. Results of the proposed technique are analyzed to evaluate the completeness of set objectives.

Original languageEnglish
Title of host publication2nd International Conference on Energy, Power and Environment
Subtitle of host publicationTowards Smart Technology, ICEPE 2018
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)9781538647691
DOIs
Publication statusPublished - 04-03-2019
Event2nd International Conference on Energy, Power and Environment, ICEPE 2018 - Shillong, Meghalaya, India
Duration: 01-06-201802-06-2018

Publication series

Name2nd International Conference on Energy, Power and Environment: Towards Smart Technology, ICEPE 2018

Conference

Conference2nd International Conference on Energy, Power and Environment, ICEPE 2018
CountryIndia
CityShillong, Meghalaya
Period01-06-1802-06-18

All Science Journal Classification (ASJC) codes

  • Control and Optimization
  • Energy Engineering and Power Technology
  • Computer Networks and Communications
  • Renewable Energy, Sustainability and the Environment

Fingerprint Dive into the research topics of 'Analysis of Sampling on Process Timing Parameters in a Networked Control System'. Together they form a unique fingerprint.

  • Cite this

    Santhosh, K. V., & Esilva, N. N. (2019). Analysis of Sampling on Process Timing Parameters in a Networked Control System. In 2nd International Conference on Energy, Power and Environment: Towards Smart Technology, ICEPE 2018 [8659086] (2nd International Conference on Energy, Power and Environment: Towards Smart Technology, ICEPE 2018). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/EPETSG.2018.8659086