Analysis of wear and sem characteristics on ferrous composites through powder metallurgy method

K. Ramadurai, V. Sathan Raj, R. Vinoth

Research output: Contribution to journalArticle

Abstract

Iron is the most commercially used metal in various fields from the ancient period. Nowadays its application in the marine and aerospace fields gets reduced gradually due to the density and ease of corrodibility nature. In this study the iron properties are optimized without compromising its hardness and strength. The metal matrix is formed in iron by adding alumina and bagasse fly ash as an alloying element. This study is done by powder metallurgical route. Also, experimental analysis is done on composite material after the sintering process at austenitization temperature. The wear test are taken for composite to check mechanical properties and the Scanning Electron Microscope (SEM) is used to understand the fine dispersion of alloying element in the composite. Finally, the samples are benchmarked with each other to identify that it is valuable one.

Original languageEnglish
Pages (from-to)609-614
Number of pages6
JournalInternational Journal of Mechanical and Production Engineering Research and Development
Volume8
Issue number4
DOIs
Publication statusPublished - 31-08-2018
Externally publishedYes

Fingerprint

Powder metallurgy
Iron
Wear of materials
Alloying elements
Composite materials
Metals
Coal Ash
Bagasse
Aluminum Oxide
Fly ash
Powders
Electron microscopes
Alumina
Sintering
Hardness
Scanning
Mechanical properties
Temperature

All Science Journal Classification (ASJC) codes

  • Aerospace Engineering
  • Mechanical Engineering
  • Fluid Flow and Transfer Processes

Cite this

@article{4ad58b145d1c4246a3049475b3d65e02,
title = "Analysis of wear and sem characteristics on ferrous composites through powder metallurgy method",
abstract = "Iron is the most commercially used metal in various fields from the ancient period. Nowadays its application in the marine and aerospace fields gets reduced gradually due to the density and ease of corrodibility nature. In this study the iron properties are optimized without compromising its hardness and strength. The metal matrix is formed in iron by adding alumina and bagasse fly ash as an alloying element. This study is done by powder metallurgical route. Also, experimental analysis is done on composite material after the sintering process at austenitization temperature. The wear test are taken for composite to check mechanical properties and the Scanning Electron Microscope (SEM) is used to understand the fine dispersion of alloying element in the composite. Finally, the samples are benchmarked with each other to identify that it is valuable one.",
author = "K. Ramadurai and {Sathan Raj}, V. and R. Vinoth",
year = "2018",
month = "8",
day = "31",
doi = "10.24247/ijmperdaug201863",
language = "English",
volume = "8",
pages = "609--614",
journal = "International Journal of Mechanical and Production Engineering Research and Development",
issn = "2249-6890",
publisher = "Transstellar Journal Publications and Research Consultancy Private Limited (TJPRC)",
number = "4",

}

Analysis of wear and sem characteristics on ferrous composites through powder metallurgy method. / Ramadurai, K.; Sathan Raj, V.; Vinoth, R.

In: International Journal of Mechanical and Production Engineering Research and Development, Vol. 8, No. 4, 31.08.2018, p. 609-614.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Analysis of wear and sem characteristics on ferrous composites through powder metallurgy method

AU - Ramadurai, K.

AU - Sathan Raj, V.

AU - Vinoth, R.

PY - 2018/8/31

Y1 - 2018/8/31

N2 - Iron is the most commercially used metal in various fields from the ancient period. Nowadays its application in the marine and aerospace fields gets reduced gradually due to the density and ease of corrodibility nature. In this study the iron properties are optimized without compromising its hardness and strength. The metal matrix is formed in iron by adding alumina and bagasse fly ash as an alloying element. This study is done by powder metallurgical route. Also, experimental analysis is done on composite material after the sintering process at austenitization temperature. The wear test are taken for composite to check mechanical properties and the Scanning Electron Microscope (SEM) is used to understand the fine dispersion of alloying element in the composite. Finally, the samples are benchmarked with each other to identify that it is valuable one.

AB - Iron is the most commercially used metal in various fields from the ancient period. Nowadays its application in the marine and aerospace fields gets reduced gradually due to the density and ease of corrodibility nature. In this study the iron properties are optimized without compromising its hardness and strength. The metal matrix is formed in iron by adding alumina and bagasse fly ash as an alloying element. This study is done by powder metallurgical route. Also, experimental analysis is done on composite material after the sintering process at austenitization temperature. The wear test are taken for composite to check mechanical properties and the Scanning Electron Microscope (SEM) is used to understand the fine dispersion of alloying element in the composite. Finally, the samples are benchmarked with each other to identify that it is valuable one.

UR - http://www.scopus.com/inward/record.url?scp=85050364470&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85050364470&partnerID=8YFLogxK

U2 - 10.24247/ijmperdaug201863

DO - 10.24247/ijmperdaug201863

M3 - Article

VL - 8

SP - 609

EP - 614

JO - International Journal of Mechanical and Production Engineering Research and Development

JF - International Journal of Mechanical and Production Engineering Research and Development

SN - 2249-6890

IS - 4

ER -