Control of integrating process with dead time using auto-tuning approach

G. Saravanakumar, R. S.D. Wahidabanu

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

A modification of Smith predictor for controlling higher order processes with integral action and long dead-time is proposed in this paper. The controller used in this Smith predictor is an Integral-Proportional Derivative controller, where the Integrator is in the forward path and the Proportional and Derivative control are in the feedback, acting on the feedback signal. The main objective of this paper is to design a dead time compensator, which has minimum tuning parameters, simple controller tuning, and robust performance of tuning formulae, and to obtain a critically damped system that is as fast as possible in its set point and load disturbance rejection performance. The controller in this paper is tuned by an adaptive method. This paper also presents a survey of various dead time compensators and their performance analysis.

Original languageEnglish
Pages (from-to)89-98
Number of pages10
JournalBrazilian Journal of Chemical Engineering
Volume26
Issue number1
DOIs
Publication statusPublished - 01-01-2009
Externally publishedYes

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Chemical Engineering(all)

Cite this