Design and Analysis of Performance Characteristics of Electronic Ballast Used for Fluorescent Lamp

J. Lokesh, Akshat Khemka, Poorvi Sharma

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Simulation and measurement are essential to the process of designing electronics. But they have differences in capabilities and limitation of making it happen. This paper presents the detailed implementation of an electronic ballast, for a fluorescent lamp. The circuit is commutated smoothing circuit, power switch, and driving circuit. It is a low-voltage starter, non-stroboscopic, has no noise, energy efficient, and has high power factor with very high switching speed. Characteristic results and measurements are provided with comparison to market available ballast. The circuit has been successfully applied to a 36 W lamp.

Original languageEnglish
Title of host publicationAdvances in Systems, Control and Automation - ETAEERE-2016
PublisherSpringer Verlag
Pages251-257
Number of pages7
ISBN (Print)9789811047619
DOIs
Publication statusPublished - 01-01-2018
Externally publishedYes
EventInternational Conference on Emerging Trends and Advances in Electrical Engineering and Renewable Energy, ETAEERE 2016 - Majhitar, India
Duration: 17-12-201618-12-2016

Publication series

NameLecture Notes in Electrical Engineering
Volume442
ISSN (Print)1876-1100
ISSN (Electronic)1876-1119

Conference

ConferenceInternational Conference on Emerging Trends and Advances in Electrical Engineering and Renewable Energy, ETAEERE 2016
CountryIndia
CityMajhitar
Period17-12-1618-12-16

Fingerprint

Fluorescent lamps
Networks (circuits)
Starters
Electric lamps
Electronic equipment
Switches
Electric potential

All Science Journal Classification (ASJC) codes

  • Industrial and Manufacturing Engineering

Cite this

Lokesh, J., Khemka, A., & Sharma, P. (2018). Design and Analysis of Performance Characteristics of Electronic Ballast Used for Fluorescent Lamp. In Advances in Systems, Control and Automation - ETAEERE-2016 (pp. 251-257). (Lecture Notes in Electrical Engineering; Vol. 442). Springer Verlag. https://doi.org/10.1007/978-981-10-4762-6_23
Lokesh, J. ; Khemka, Akshat ; Sharma, Poorvi. / Design and Analysis of Performance Characteristics of Electronic Ballast Used for Fluorescent Lamp. Advances in Systems, Control and Automation - ETAEERE-2016. Springer Verlag, 2018. pp. 251-257 (Lecture Notes in Electrical Engineering).
@inproceedings{95ae1337dfab4c1085b0ca5aab4889e9,
title = "Design and Analysis of Performance Characteristics of Electronic Ballast Used for Fluorescent Lamp",
abstract = "Simulation and measurement are essential to the process of designing electronics. But they have differences in capabilities and limitation of making it happen. This paper presents the detailed implementation of an electronic ballast, for a fluorescent lamp. The circuit is commutated smoothing circuit, power switch, and driving circuit. It is a low-voltage starter, non-stroboscopic, has no noise, energy efficient, and has high power factor with very high switching speed. Characteristic results and measurements are provided with comparison to market available ballast. The circuit has been successfully applied to a 36 W lamp.",
author = "J. Lokesh and Akshat Khemka and Poorvi Sharma",
year = "2018",
month = "1",
day = "1",
doi = "10.1007/978-981-10-4762-6_23",
language = "English",
isbn = "9789811047619",
series = "Lecture Notes in Electrical Engineering",
publisher = "Springer Verlag",
pages = "251--257",
booktitle = "Advances in Systems, Control and Automation - ETAEERE-2016",
address = "Germany",

}

Lokesh, J, Khemka, A & Sharma, P 2018, Design and Analysis of Performance Characteristics of Electronic Ballast Used for Fluorescent Lamp. in Advances in Systems, Control and Automation - ETAEERE-2016. Lecture Notes in Electrical Engineering, vol. 442, Springer Verlag, pp. 251-257, International Conference on Emerging Trends and Advances in Electrical Engineering and Renewable Energy, ETAEERE 2016, Majhitar, India, 17-12-16. https://doi.org/10.1007/978-981-10-4762-6_23

Design and Analysis of Performance Characteristics of Electronic Ballast Used for Fluorescent Lamp. / Lokesh, J.; Khemka, Akshat; Sharma, Poorvi.

Advances in Systems, Control and Automation - ETAEERE-2016. Springer Verlag, 2018. p. 251-257 (Lecture Notes in Electrical Engineering; Vol. 442).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Design and Analysis of Performance Characteristics of Electronic Ballast Used for Fluorescent Lamp

AU - Lokesh, J.

AU - Khemka, Akshat

AU - Sharma, Poorvi

PY - 2018/1/1

Y1 - 2018/1/1

N2 - Simulation and measurement are essential to the process of designing electronics. But they have differences in capabilities and limitation of making it happen. This paper presents the detailed implementation of an electronic ballast, for a fluorescent lamp. The circuit is commutated smoothing circuit, power switch, and driving circuit. It is a low-voltage starter, non-stroboscopic, has no noise, energy efficient, and has high power factor with very high switching speed. Characteristic results and measurements are provided with comparison to market available ballast. The circuit has been successfully applied to a 36 W lamp.

AB - Simulation and measurement are essential to the process of designing electronics. But they have differences in capabilities and limitation of making it happen. This paper presents the detailed implementation of an electronic ballast, for a fluorescent lamp. The circuit is commutated smoothing circuit, power switch, and driving circuit. It is a low-voltage starter, non-stroboscopic, has no noise, energy efficient, and has high power factor with very high switching speed. Characteristic results and measurements are provided with comparison to market available ballast. The circuit has been successfully applied to a 36 W lamp.

UR - http://www.scopus.com/inward/record.url?scp=85040001008&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85040001008&partnerID=8YFLogxK

U2 - 10.1007/978-981-10-4762-6_23

DO - 10.1007/978-981-10-4762-6_23

M3 - Conference contribution

SN - 9789811047619

T3 - Lecture Notes in Electrical Engineering

SP - 251

EP - 257

BT - Advances in Systems, Control and Automation - ETAEERE-2016

PB - Springer Verlag

ER -

Lokesh J, Khemka A, Sharma P. Design and Analysis of Performance Characteristics of Electronic Ballast Used for Fluorescent Lamp. In Advances in Systems, Control and Automation - ETAEERE-2016. Springer Verlag. 2018. p. 251-257. (Lecture Notes in Electrical Engineering). https://doi.org/10.1007/978-981-10-4762-6_23