Design and implementation of an isolated switched-mode power supply for led application

K. P. Reshma, R. Sreenath, Namratha Pai

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Abstract

This paper describes the design and implementation of an isolated switched mode power supply(SMPS) for LED lighting application. The flyback converter is used for AC to DC conversion as well as DC to DC conversion providing galvanic isolation between input and output. Basically, flyback converter can be derived from buck-boost converter, in which the inductor split to form a transformer. The transformer with specified turns ratio steps up or down the input voltage with isolation. The energy transfer from primary to secondary is controlled using a switch connected to primary. The duty ratio of the switch decides the output level, which can be controlled using an isolated secondary feedback. In this paper, a flyback circuit is designed to obtain a pure DC voltage of 12V, 5A from 230V, 50Hz AC mains. The output current can be regulated to drive a 16W LED load.

Original languageEnglish
Title of host publication2016 International Conference on Computation of Power, Energy, Information and Communication, ICCPEIC 2016
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages459-461
Number of pages3
ISBN (Electronic)9781509009015
DOIs
Publication statusPublished - 31-08-2016
Externally publishedYes
Event5th International Conference on Computation of Power, Energy Information and Communication, ICCPEIC 2016 - Melmaruvathur, Chennai, India
Duration: 20-04-201621-04-2016

Conference

Conference5th International Conference on Computation of Power, Energy Information and Communication, ICCPEIC 2016
CountryIndia
CityMelmaruvathur, Chennai
Period20-04-1621-04-16

Fingerprint

Switched mode power supplies
Converter
Light emitting diodes
Switches
Transformer
Isolation
Output
Switch
Electric potential
Voltage
Energy transfer
Lighting
Energy Transfer
Feedback
Networks (circuits)
Design

All Science Journal Classification (ASJC) codes

  • Computer Networks and Communications
  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering
  • Computer Science Applications
  • Control and Optimization

Cite this

Reshma, K. P., Sreenath, R., & Pai, N. (2016). Design and implementation of an isolated switched-mode power supply for led application. In 2016 International Conference on Computation of Power, Energy, Information and Communication, ICCPEIC 2016 (pp. 459-461). [7557277] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICCPEIC.2016.7557277
Reshma, K. P. ; Sreenath, R. ; Pai, Namratha. / Design and implementation of an isolated switched-mode power supply for led application. 2016 International Conference on Computation of Power, Energy, Information and Communication, ICCPEIC 2016. Institute of Electrical and Electronics Engineers Inc., 2016. pp. 459-461
@inproceedings{9013d079a8d04609b3bdeb5a7e8e4bcb,
title = "Design and implementation of an isolated switched-mode power supply for led application",
abstract = "This paper describes the design and implementation of an isolated switched mode power supply(SMPS) for LED lighting application. The flyback converter is used for AC to DC conversion as well as DC to DC conversion providing galvanic isolation between input and output. Basically, flyback converter can be derived from buck-boost converter, in which the inductor split to form a transformer. The transformer with specified turns ratio steps up or down the input voltage with isolation. The energy transfer from primary to secondary is controlled using a switch connected to primary. The duty ratio of the switch decides the output level, which can be controlled using an isolated secondary feedback. In this paper, a flyback circuit is designed to obtain a pure DC voltage of 12V, 5A from 230V, 50Hz AC mains. The output current can be regulated to drive a 16W LED load.",
author = "Reshma, {K. P.} and R. Sreenath and Namratha Pai",
year = "2016",
month = "8",
day = "31",
doi = "10.1109/ICCPEIC.2016.7557277",
language = "English",
pages = "459--461",
booktitle = "2016 International Conference on Computation of Power, Energy, Information and Communication, ICCPEIC 2016",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
address = "United States",

}

Reshma, KP, Sreenath, R & Pai, N 2016, Design and implementation of an isolated switched-mode power supply for led application. in 2016 International Conference on Computation of Power, Energy, Information and Communication, ICCPEIC 2016., 7557277, Institute of Electrical and Electronics Engineers Inc., pp. 459-461, 5th International Conference on Computation of Power, Energy Information and Communication, ICCPEIC 2016, Melmaruvathur, Chennai, India, 20-04-16. https://doi.org/10.1109/ICCPEIC.2016.7557277

Design and implementation of an isolated switched-mode power supply for led application. / Reshma, K. P.; Sreenath, R.; Pai, Namratha.

2016 International Conference on Computation of Power, Energy, Information and Communication, ICCPEIC 2016. Institute of Electrical and Electronics Engineers Inc., 2016. p. 459-461 7557277.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Design and implementation of an isolated switched-mode power supply for led application

AU - Reshma, K. P.

AU - Sreenath, R.

AU - Pai, Namratha

PY - 2016/8/31

Y1 - 2016/8/31

N2 - This paper describes the design and implementation of an isolated switched mode power supply(SMPS) for LED lighting application. The flyback converter is used for AC to DC conversion as well as DC to DC conversion providing galvanic isolation between input and output. Basically, flyback converter can be derived from buck-boost converter, in which the inductor split to form a transformer. The transformer with specified turns ratio steps up or down the input voltage with isolation. The energy transfer from primary to secondary is controlled using a switch connected to primary. The duty ratio of the switch decides the output level, which can be controlled using an isolated secondary feedback. In this paper, a flyback circuit is designed to obtain a pure DC voltage of 12V, 5A from 230V, 50Hz AC mains. The output current can be regulated to drive a 16W LED load.

AB - This paper describes the design and implementation of an isolated switched mode power supply(SMPS) for LED lighting application. The flyback converter is used for AC to DC conversion as well as DC to DC conversion providing galvanic isolation between input and output. Basically, flyback converter can be derived from buck-boost converter, in which the inductor split to form a transformer. The transformer with specified turns ratio steps up or down the input voltage with isolation. The energy transfer from primary to secondary is controlled using a switch connected to primary. The duty ratio of the switch decides the output level, which can be controlled using an isolated secondary feedback. In this paper, a flyback circuit is designed to obtain a pure DC voltage of 12V, 5A from 230V, 50Hz AC mains. The output current can be regulated to drive a 16W LED load.

UR - http://www.scopus.com/inward/record.url?scp=84992571497&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84992571497&partnerID=8YFLogxK

U2 - 10.1109/ICCPEIC.2016.7557277

DO - 10.1109/ICCPEIC.2016.7557277

M3 - Conference contribution

SP - 459

EP - 461

BT - 2016 International Conference on Computation of Power, Energy, Information and Communication, ICCPEIC 2016

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Reshma KP, Sreenath R, Pai N. Design and implementation of an isolated switched-mode power supply for led application. In 2016 International Conference on Computation of Power, Energy, Information and Communication, ICCPEIC 2016. Institute of Electrical and Electronics Engineers Inc. 2016. p. 459-461. 7557277 https://doi.org/10.1109/ICCPEIC.2016.7557277