Design and simulation of grid connected hybrid solar-WECS using SIMULINK/MATLAB

S. P. Lakshman Rao, Ciji Pearl Kurian, B. K. Singh, Kumar Abhinav, Gaurav Nandy

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Abstract

As a result of rising concern of global warming and the depletion of fossil fuel reserves, many are looking at sustainable energy solutions to preserve the earth for the future generations. Environmentally friendly solutions are becoming more prominent than ever as a result of concern regarding the state of our deteriorating planet. This paper presents one of the alternate ways for the power generation, which is clean and economical for the future generation. The two sources which are used for power generation are solar and wind. DC output of photovoltaic panel and rectified dc output of Wind energy conversion system(WECS) is fed to the boost converter which is operating in closed loop in-order to maintain constant output power in any environmental condition. It consists of wind turbines with permanent magnet synchronous generator (PMSG). The output of boost converter is feed to the common dc link which is connected to the 3 phase Sinusoidal pulse width modulation (SPWM) inverter, which converts its dc input to 3 phase AC output. Simulated 2KW solar and 3.2KW wind hybrid system. The simulation of whole hybrid model is done in SIMULINK/MATLAB.

Original languageEnglish
Title of host publicationProceedings of the 2014 International Conference on Advances in Energy Conversion Technologies - Intelligent Energy Management
Subtitle of host publicationTechnologies and Challenges, ICAECT 2014
PublisherIEEE Computer Society
Pages241-247
Number of pages7
DOIs
Publication statusPublished - 2014
Event2014 International Conference on Advances in Energy Conversion Technologies - Intelligent Energy Management: Technologies and Challenges, ICAECT 2014 - Manipal, India
Duration: 23-01-201425-01-2014

Conference

Conference2014 International Conference on Advances in Energy Conversion Technologies - Intelligent Energy Management: Technologies and Challenges, ICAECT 2014
CountryIndia
CityManipal
Period23-01-1425-01-14

Fingerprint

Solar wind
Energy conversion
Wind power
MATLAB
Solar power generation
Synchronous generators
Global warming
Planets
Hybrid systems
Fossil fuels
Pulse width modulation
Wind turbines
Permanent magnets
Power generation
Earth (planet)

All Science Journal Classification (ASJC) codes

  • Energy Engineering and Power Technology
  • Fuel Technology

Cite this

Lakshman Rao, S. P., Kurian, C. P., Singh, B. K., Abhinav, K., & Nandy, G. (2014). Design and simulation of grid connected hybrid solar-WECS using SIMULINK/MATLAB. In Proceedings of the 2014 International Conference on Advances in Energy Conversion Technologies - Intelligent Energy Management: Technologies and Challenges, ICAECT 2014 (pp. 241-247). [6757095] IEEE Computer Society. https://doi.org/10.1109/ICAECT.2014.6757095
Lakshman Rao, S. P. ; Kurian, Ciji Pearl ; Singh, B. K. ; Abhinav, Kumar ; Nandy, Gaurav. / Design and simulation of grid connected hybrid solar-WECS using SIMULINK/MATLAB. Proceedings of the 2014 International Conference on Advances in Energy Conversion Technologies - Intelligent Energy Management: Technologies and Challenges, ICAECT 2014. IEEE Computer Society, 2014. pp. 241-247
@inproceedings{4c33cb82e9d14682897484a9df4a4db4,
title = "Design and simulation of grid connected hybrid solar-WECS using SIMULINK/MATLAB",
abstract = "As a result of rising concern of global warming and the depletion of fossil fuel reserves, many are looking at sustainable energy solutions to preserve the earth for the future generations. Environmentally friendly solutions are becoming more prominent than ever as a result of concern regarding the state of our deteriorating planet. This paper presents one of the alternate ways for the power generation, which is clean and economical for the future generation. The two sources which are used for power generation are solar and wind. DC output of photovoltaic panel and rectified dc output of Wind energy conversion system(WECS) is fed to the boost converter which is operating in closed loop in-order to maintain constant output power in any environmental condition. It consists of wind turbines with permanent magnet synchronous generator (PMSG). The output of boost converter is feed to the common dc link which is connected to the 3 phase Sinusoidal pulse width modulation (SPWM) inverter, which converts its dc input to 3 phase AC output. Simulated 2KW solar and 3.2KW wind hybrid system. The simulation of whole hybrid model is done in SIMULINK/MATLAB.",
author = "{Lakshman Rao}, {S. P.} and Kurian, {Ciji Pearl} and Singh, {B. K.} and Kumar Abhinav and Gaurav Nandy",
year = "2014",
doi = "10.1109/ICAECT.2014.6757095",
language = "English",
pages = "241--247",
booktitle = "Proceedings of the 2014 International Conference on Advances in Energy Conversion Technologies - Intelligent Energy Management",
publisher = "IEEE Computer Society",
address = "United States",

}

Lakshman Rao, SP, Kurian, CP, Singh, BK, Abhinav, K & Nandy, G 2014, Design and simulation of grid connected hybrid solar-WECS using SIMULINK/MATLAB. in Proceedings of the 2014 International Conference on Advances in Energy Conversion Technologies - Intelligent Energy Management: Technologies and Challenges, ICAECT 2014., 6757095, IEEE Computer Society, pp. 241-247, 2014 International Conference on Advances in Energy Conversion Technologies - Intelligent Energy Management: Technologies and Challenges, ICAECT 2014, Manipal, India, 23-01-14. https://doi.org/10.1109/ICAECT.2014.6757095

Design and simulation of grid connected hybrid solar-WECS using SIMULINK/MATLAB. / Lakshman Rao, S. P.; Kurian, Ciji Pearl; Singh, B. K.; Abhinav, Kumar; Nandy, Gaurav.

Proceedings of the 2014 International Conference on Advances in Energy Conversion Technologies - Intelligent Energy Management: Technologies and Challenges, ICAECT 2014. IEEE Computer Society, 2014. p. 241-247 6757095.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Design and simulation of grid connected hybrid solar-WECS using SIMULINK/MATLAB

AU - Lakshman Rao, S. P.

AU - Kurian, Ciji Pearl

AU - Singh, B. K.

AU - Abhinav, Kumar

AU - Nandy, Gaurav

PY - 2014

Y1 - 2014

N2 - As a result of rising concern of global warming and the depletion of fossil fuel reserves, many are looking at sustainable energy solutions to preserve the earth for the future generations. Environmentally friendly solutions are becoming more prominent than ever as a result of concern regarding the state of our deteriorating planet. This paper presents one of the alternate ways for the power generation, which is clean and economical for the future generation. The two sources which are used for power generation are solar and wind. DC output of photovoltaic panel and rectified dc output of Wind energy conversion system(WECS) is fed to the boost converter which is operating in closed loop in-order to maintain constant output power in any environmental condition. It consists of wind turbines with permanent magnet synchronous generator (PMSG). The output of boost converter is feed to the common dc link which is connected to the 3 phase Sinusoidal pulse width modulation (SPWM) inverter, which converts its dc input to 3 phase AC output. Simulated 2KW solar and 3.2KW wind hybrid system. The simulation of whole hybrid model is done in SIMULINK/MATLAB.

AB - As a result of rising concern of global warming and the depletion of fossil fuel reserves, many are looking at sustainable energy solutions to preserve the earth for the future generations. Environmentally friendly solutions are becoming more prominent than ever as a result of concern regarding the state of our deteriorating planet. This paper presents one of the alternate ways for the power generation, which is clean and economical for the future generation. The two sources which are used for power generation are solar and wind. DC output of photovoltaic panel and rectified dc output of Wind energy conversion system(WECS) is fed to the boost converter which is operating in closed loop in-order to maintain constant output power in any environmental condition. It consists of wind turbines with permanent magnet synchronous generator (PMSG). The output of boost converter is feed to the common dc link which is connected to the 3 phase Sinusoidal pulse width modulation (SPWM) inverter, which converts its dc input to 3 phase AC output. Simulated 2KW solar and 3.2KW wind hybrid system. The simulation of whole hybrid model is done in SIMULINK/MATLAB.

UR - http://www.scopus.com/inward/record.url?scp=84897510972&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84897510972&partnerID=8YFLogxK

U2 - 10.1109/ICAECT.2014.6757095

DO - 10.1109/ICAECT.2014.6757095

M3 - Conference contribution

AN - SCOPUS:84897510972

SP - 241

EP - 247

BT - Proceedings of the 2014 International Conference on Advances in Energy Conversion Technologies - Intelligent Energy Management

PB - IEEE Computer Society

ER -

Lakshman Rao SP, Kurian CP, Singh BK, Abhinav K, Nandy G. Design and simulation of grid connected hybrid solar-WECS using SIMULINK/MATLAB. In Proceedings of the 2014 International Conference on Advances in Energy Conversion Technologies - Intelligent Energy Management: Technologies and Challenges, ICAECT 2014. IEEE Computer Society. 2014. p. 241-247. 6757095 https://doi.org/10.1109/ICAECT.2014.6757095