Development of a numerical model for performance prediction of an integrated microcombustor-thermoelectric power generator

Karan Hiranandani, B. Aravind, V. Ratna Kishore, Sudarshan Kumar

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

This paper presents the development of a numerical model for a thermoelectric generator integrated with a novel microcombustor to predict the thermoelectric performance of the system. The novelty of the work lies in the development of a numerical model to predict and analyze the system's thermal characteristics and thermoelectric performance with numerical simulations. The system consists of a microscale combustor and two Bi2Te3 thermoelectric modules mounted on the combustor. The combustor has backward facing steps and a recirculating cup to enhance its flame stability and thermal characteristics over other combustors. Following the thermal analysis of the microcombustor, the model for predicting the power output from the thermoelectric modules is validated and then integrated by using separate sub-routine. A maximum open-circuit voltage of 8 V was reported for the integrated system. For a load resistance of 2.8 Ω, a power output of 5.6 W was obtained at a conversion efficiency of 6.8%. It can be concluded that the successful integration of a thermoelectric model into CFD software will provide great impetus to future studies on thermoelectric generators, while the optimized combustor, with a volume comparable to that of a dry cell, can serve as a viable replacement for electrochemical batteries.

Original languageEnglish
Article number116624
JournalEnergy
Volume192
DOIs
Publication statusPublished - 01-02-2020
Externally publishedYes

Fingerprint

Thermoelectric power
Combustors
Numerical models
Open circuit voltage
Thermoanalysis
Conversion efficiency
Computational fluid dynamics
Computer simulation
Hot Temperature

All Science Journal Classification (ASJC) codes

  • Civil and Structural Engineering
  • Building and Construction
  • Pollution
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Electrical and Electronic Engineering

Cite this

Hiranandani, Karan ; Aravind, B. ; Ratna Kishore, V. ; Kumar, Sudarshan. / Development of a numerical model for performance prediction of an integrated microcombustor-thermoelectric power generator. In: Energy. 2020 ; Vol. 192.
@article{3233452471da449b94264c28ac95d040,
title = "Development of a numerical model for performance prediction of an integrated microcombustor-thermoelectric power generator",
abstract = "This paper presents the development of a numerical model for a thermoelectric generator integrated with a novel microcombustor to predict the thermoelectric performance of the system. The novelty of the work lies in the development of a numerical model to predict and analyze the system's thermal characteristics and thermoelectric performance with numerical simulations. The system consists of a microscale combustor and two Bi2Te3 thermoelectric modules mounted on the combustor. The combustor has backward facing steps and a recirculating cup to enhance its flame stability and thermal characteristics over other combustors. Following the thermal analysis of the microcombustor, the model for predicting the power output from the thermoelectric modules is validated and then integrated by using separate sub-routine. A maximum open-circuit voltage of 8 V was reported for the integrated system. For a load resistance of 2.8 Ω, a power output of 5.6 W was obtained at a conversion efficiency of 6.8{\%}. It can be concluded that the successful integration of a thermoelectric model into CFD software will provide great impetus to future studies on thermoelectric generators, while the optimized combustor, with a volume comparable to that of a dry cell, can serve as a viable replacement for electrochemical batteries.",
author = "Karan Hiranandani and B. Aravind and {Ratna Kishore}, V. and Sudarshan Kumar",
year = "2020",
month = "2",
day = "1",
doi = "10.1016/j.energy.2019.116624",
language = "English",
volume = "192",
journal = "Energy",
issn = "0360-5442",
publisher = "Elsevier Limited",

}

Development of a numerical model for performance prediction of an integrated microcombustor-thermoelectric power generator. / Hiranandani, Karan; Aravind, B.; Ratna Kishore, V.; Kumar, Sudarshan.

In: Energy, Vol. 192, 116624, 01.02.2020.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Development of a numerical model for performance prediction of an integrated microcombustor-thermoelectric power generator

AU - Hiranandani, Karan

AU - Aravind, B.

AU - Ratna Kishore, V.

AU - Kumar, Sudarshan

PY - 2020/2/1

Y1 - 2020/2/1

N2 - This paper presents the development of a numerical model for a thermoelectric generator integrated with a novel microcombustor to predict the thermoelectric performance of the system. The novelty of the work lies in the development of a numerical model to predict and analyze the system's thermal characteristics and thermoelectric performance with numerical simulations. The system consists of a microscale combustor and two Bi2Te3 thermoelectric modules mounted on the combustor. The combustor has backward facing steps and a recirculating cup to enhance its flame stability and thermal characteristics over other combustors. Following the thermal analysis of the microcombustor, the model for predicting the power output from the thermoelectric modules is validated and then integrated by using separate sub-routine. A maximum open-circuit voltage of 8 V was reported for the integrated system. For a load resistance of 2.8 Ω, a power output of 5.6 W was obtained at a conversion efficiency of 6.8%. It can be concluded that the successful integration of a thermoelectric model into CFD software will provide great impetus to future studies on thermoelectric generators, while the optimized combustor, with a volume comparable to that of a dry cell, can serve as a viable replacement for electrochemical batteries.

AB - This paper presents the development of a numerical model for a thermoelectric generator integrated with a novel microcombustor to predict the thermoelectric performance of the system. The novelty of the work lies in the development of a numerical model to predict and analyze the system's thermal characteristics and thermoelectric performance with numerical simulations. The system consists of a microscale combustor and two Bi2Te3 thermoelectric modules mounted on the combustor. The combustor has backward facing steps and a recirculating cup to enhance its flame stability and thermal characteristics over other combustors. Following the thermal analysis of the microcombustor, the model for predicting the power output from the thermoelectric modules is validated and then integrated by using separate sub-routine. A maximum open-circuit voltage of 8 V was reported for the integrated system. For a load resistance of 2.8 Ω, a power output of 5.6 W was obtained at a conversion efficiency of 6.8%. It can be concluded that the successful integration of a thermoelectric model into CFD software will provide great impetus to future studies on thermoelectric generators, while the optimized combustor, with a volume comparable to that of a dry cell, can serve as a viable replacement for electrochemical batteries.

UR - http://www.scopus.com/inward/record.url?scp=85076029095&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85076029095&partnerID=8YFLogxK

U2 - 10.1016/j.energy.2019.116624

DO - 10.1016/j.energy.2019.116624

M3 - Article

AN - SCOPUS:85076029095

VL - 192

JO - Energy

JF - Energy

SN - 0360-5442

M1 - 116624

ER -