Double input soft-transition DC-DC converter for photo-voltaic applications

N. Anandh

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

A double input DC-DC converter based on Zero-Voltage Transition technique enough to attract power from two distinct sources serving a joint dc-bus is projected. This converter belongs to higher-order family behaving as buck converter with one dc source and it also performs as both buck and boost converter with another source. Here the two sources either independently or concurrently deliver power to the consequent load with least ripple current is an important aspect of the suggested converter. This aspect is mainly needed for photo-voltaic applications. The main objective here is to realize the soft-transition by incorporating the ZVT cell into the double input DC-DC converter which allows to increase the efficiency by decreasing the switching losses and current/voltage stresses in the converter. The digital voltage controller for the converter is designed using SISO tool in MATLAB. Analysis of 24V, 96W converter is done through both experimental process and simulation.

Original languageEnglish
Title of host publication2016 IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016 - Proceedings
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages2135-2139
Number of pages5
ISBN (Electronic)9781509007745
DOIs
Publication statusPublished - 05-01-2017
Event1st IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016 - Bangalore, India
Duration: 20-05-201621-05-2016

Conference

Conference1st IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016
CountryIndia
CityBangalore
Period20-05-1621-05-16

Fingerprint

DC-DC converters
Electric potential
MATLAB
Controllers

All Science Journal Classification (ASJC) codes

  • Computer Networks and Communications
  • Computer Science Applications
  • Information Systems
  • Electrical and Electronic Engineering

Cite this

Anandh, N. (2017). Double input soft-transition DC-DC converter for photo-voltaic applications. In 2016 IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016 - Proceedings (pp. 2135-2139). [7808217] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/RTEICT.2016.7808217
Anandh, N. / Double input soft-transition DC-DC converter for photo-voltaic applications. 2016 IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2017. pp. 2135-2139
@inproceedings{7b3538b71ace41d1a64b34c7e664601c,
title = "Double input soft-transition DC-DC converter for photo-voltaic applications",
abstract = "A double input DC-DC converter based on Zero-Voltage Transition technique enough to attract power from two distinct sources serving a joint dc-bus is projected. This converter belongs to higher-order family behaving as buck converter with one dc source and it also performs as both buck and boost converter with another source. Here the two sources either independently or concurrently deliver power to the consequent load with least ripple current is an important aspect of the suggested converter. This aspect is mainly needed for photo-voltaic applications. The main objective here is to realize the soft-transition by incorporating the ZVT cell into the double input DC-DC converter which allows to increase the efficiency by decreasing the switching losses and current/voltage stresses in the converter. The digital voltage controller for the converter is designed using SISO tool in MATLAB. Analysis of 24V, 96W converter is done through both experimental process and simulation.",
author = "N. Anandh",
year = "2017",
month = "1",
day = "5",
doi = "10.1109/RTEICT.2016.7808217",
language = "English",
pages = "2135--2139",
booktitle = "2016 IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016 - Proceedings",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
address = "United States",

}

Anandh, N 2017, Double input soft-transition DC-DC converter for photo-voltaic applications. in 2016 IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016 - Proceedings., 7808217, Institute of Electrical and Electronics Engineers Inc., pp. 2135-2139, 1st IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016, Bangalore, India, 20-05-16. https://doi.org/10.1109/RTEICT.2016.7808217

Double input soft-transition DC-DC converter for photo-voltaic applications. / Anandh, N.

2016 IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2017. p. 2135-2139 7808217.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Double input soft-transition DC-DC converter for photo-voltaic applications

AU - Anandh, N.

PY - 2017/1/5

Y1 - 2017/1/5

N2 - A double input DC-DC converter based on Zero-Voltage Transition technique enough to attract power from two distinct sources serving a joint dc-bus is projected. This converter belongs to higher-order family behaving as buck converter with one dc source and it also performs as both buck and boost converter with another source. Here the two sources either independently or concurrently deliver power to the consequent load with least ripple current is an important aspect of the suggested converter. This aspect is mainly needed for photo-voltaic applications. The main objective here is to realize the soft-transition by incorporating the ZVT cell into the double input DC-DC converter which allows to increase the efficiency by decreasing the switching losses and current/voltage stresses in the converter. The digital voltage controller for the converter is designed using SISO tool in MATLAB. Analysis of 24V, 96W converter is done through both experimental process and simulation.

AB - A double input DC-DC converter based on Zero-Voltage Transition technique enough to attract power from two distinct sources serving a joint dc-bus is projected. This converter belongs to higher-order family behaving as buck converter with one dc source and it also performs as both buck and boost converter with another source. Here the two sources either independently or concurrently deliver power to the consequent load with least ripple current is an important aspect of the suggested converter. This aspect is mainly needed for photo-voltaic applications. The main objective here is to realize the soft-transition by incorporating the ZVT cell into the double input DC-DC converter which allows to increase the efficiency by decreasing the switching losses and current/voltage stresses in the converter. The digital voltage controller for the converter is designed using SISO tool in MATLAB. Analysis of 24V, 96W converter is done through both experimental process and simulation.

UR - http://www.scopus.com/inward/record.url?scp=85015076455&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85015076455&partnerID=8YFLogxK

U2 - 10.1109/RTEICT.2016.7808217

DO - 10.1109/RTEICT.2016.7808217

M3 - Conference contribution

SP - 2135

EP - 2139

BT - 2016 IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016 - Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Anandh N. Double input soft-transition DC-DC converter for photo-voltaic applications. In 2016 IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 2017. p. 2135-2139. 7808217 https://doi.org/10.1109/RTEICT.2016.7808217