Effect of process parameters in electric discharge machining of D2 steel and estimation of coefficient for predicting surface roughness

Deepak Doreswamy, Jatin Javeri

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

D2 steel is widely used in tool and die making industry for a variety of applications. Due to its superior mechanical properties, machining of this material by conventional methods is challenging. In the present work, the effect of process parameters in EDM of D2 steel on surface roughness is investigated and process parameters are optimised to achieve least surface roughness. It is found that Ra decreased by 6.92% for change in current from 3 A to 4.5 A, and then it is increased by 67.82% for further increase in current. The change in spark gap and pulse-on time resulted in the increase in surface roughness by 8.78% and 22%, respectively. At optimum levels of process parameters, the least surface roughness achieved is 2.14 μm. SEM image reveals that due to cyclic nature of melting and cooling of the metal in EDM, it resulted in creating network of cracks and formation of recast layers on the machined region.

Original languageEnglish
Pages (from-to)101-117
Number of pages17
JournalInternational Journal of Machining and Machinability of Materials
Volume20
Issue number2
DOIs
Publication statusPublished - 01-01-2018

Fingerprint

Electric discharge machining
Surface roughness
Steel
Electric sparks
Machining
Melting
Cooling
Cracks
Mechanical properties
Scanning electron microscopy
Metals
Industry

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Cite this

@article{bd2b294f95cb4e108ab7cc4b4c580131,
title = "Effect of process parameters in electric discharge machining of D2 steel and estimation of coefficient for predicting surface roughness",
abstract = "D2 steel is widely used in tool and die making industry for a variety of applications. Due to its superior mechanical properties, machining of this material by conventional methods is challenging. In the present work, the effect of process parameters in EDM of D2 steel on surface roughness is investigated and process parameters are optimised to achieve least surface roughness. It is found that Ra decreased by 6.92{\%} for change in current from 3 A to 4.5 A, and then it is increased by 67.82{\%} for further increase in current. The change in spark gap and pulse-on time resulted in the increase in surface roughness by 8.78{\%} and 22{\%}, respectively. At optimum levels of process parameters, the least surface roughness achieved is 2.14 μm. SEM image reveals that due to cyclic nature of melting and cooling of the metal in EDM, it resulted in creating network of cracks and formation of recast layers on the machined region.",
author = "Deepak Doreswamy and Jatin Javeri",
year = "2018",
month = "1",
day = "1",
doi = "10.1504/IJMMM.2018.090542",
language = "English",
volume = "20",
pages = "101--117",
journal = "International Journal of Machining and Machinability of Materials",
issn = "1748-5711",
publisher = "Inderscience Enterprises Ltd",
number = "2",

}

Effect of process parameters in electric discharge machining of D2 steel and estimation of coefficient for predicting surface roughness. / Doreswamy, Deepak; Javeri, Jatin.

In: International Journal of Machining and Machinability of Materials, Vol. 20, No. 2, 01.01.2018, p. 101-117.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Effect of process parameters in electric discharge machining of D2 steel and estimation of coefficient for predicting surface roughness

AU - Doreswamy, Deepak

AU - Javeri, Jatin

PY - 2018/1/1

Y1 - 2018/1/1

N2 - D2 steel is widely used in tool and die making industry for a variety of applications. Due to its superior mechanical properties, machining of this material by conventional methods is challenging. In the present work, the effect of process parameters in EDM of D2 steel on surface roughness is investigated and process parameters are optimised to achieve least surface roughness. It is found that Ra decreased by 6.92% for change in current from 3 A to 4.5 A, and then it is increased by 67.82% for further increase in current. The change in spark gap and pulse-on time resulted in the increase in surface roughness by 8.78% and 22%, respectively. At optimum levels of process parameters, the least surface roughness achieved is 2.14 μm. SEM image reveals that due to cyclic nature of melting and cooling of the metal in EDM, it resulted in creating network of cracks and formation of recast layers on the machined region.

AB - D2 steel is widely used in tool and die making industry for a variety of applications. Due to its superior mechanical properties, machining of this material by conventional methods is challenging. In the present work, the effect of process parameters in EDM of D2 steel on surface roughness is investigated and process parameters are optimised to achieve least surface roughness. It is found that Ra decreased by 6.92% for change in current from 3 A to 4.5 A, and then it is increased by 67.82% for further increase in current. The change in spark gap and pulse-on time resulted in the increase in surface roughness by 8.78% and 22%, respectively. At optimum levels of process parameters, the least surface roughness achieved is 2.14 μm. SEM image reveals that due to cyclic nature of melting and cooling of the metal in EDM, it resulted in creating network of cracks and formation of recast layers on the machined region.

UR - http://www.scopus.com/inward/record.url?scp=85044377370&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85044377370&partnerID=8YFLogxK

U2 - 10.1504/IJMMM.2018.090542

DO - 10.1504/IJMMM.2018.090542

M3 - Article

VL - 20

SP - 101

EP - 117

JO - International Journal of Machining and Machinability of Materials

JF - International Journal of Machining and Machinability of Materials

SN - 1748-5711

IS - 2

ER -