Experimental study on machining of AA7075 using Taguchi method

Anil Sequeiera, D. Deepak, H. K. Sachidananda

Research output: Contribution to journalArticlepeer-review

Abstract

The machining parameter during milling process plays a very important role in the machining process of various materials. In this study the various parameters such as feed, speed of the spindle, depth of cut has been studied considering AA7075 aluminum material and its effect on surface roughness of the workpiece have been studied. These types of material are commonly used in aerospace, defense, marine and automotive industries due to its high strength to weight ratio. The optimization of these parameters has been done considering Grey-Taguchi method. From this study it can be concluded that good surface finish can be achieved during machining of AA7075 by controlling the various parameters. From the results it can be concluded that the cutting speed, feed is significant as compared to depth of cut.

Original languageEnglish
Article number11
JournalSN Applied Sciences
Volume5
Issue number1
DOIs
Publication statusPublished - 01-2023

All Science Journal Classification (ASJC) codes

  • Chemical Engineering(all)
  • Materials Science(all)
  • Environmental Science(all)
  • Engineering(all)
  • Physics and Astronomy(all)
  • Earth and Planetary Sciences(all)

Fingerprint

Dive into the research topics of 'Experimental study on machining of AA7075 using Taguchi method'. Together they form a unique fingerprint.

Cite this