Fatigue Behaviour and Life Assessment of Jute-epoxy Composites under Tension-Tension Loading

N. H. Padmaraj, K. N. Chethan, Pavan, Anand Onkar

Research output: Contribution to journalArticle

Abstract

The present study involves fabrication and fatigue life assessment of multi-layered, woven jute fibres with epoxy matrix composites. Jute fabric were treated with 1N sodium hydroxidesolution for a duration of 6 hours. Alkali treatment was done to modify internal structure as well as surface properties of fibre. Laminates were fabricated by laying up multi layered woven jute fabric at varying angle [0-900/ (±450)2/0-900]. Vacuum bagging method was used to reduce the void content and thus increase the quality of composites. Tension-Tension fatigue tests were performed with a constant fatigue stress ratio (R=0.1) and results obtained from the tests were used to plot S-N Curve. A model based on power law equation was used for curve fitting.

Original languageEnglish
Article number012017
JournalIOP Conference Series: Materials Science and Engineering
Volume225
Issue number1
DOIs
Publication statusPublished - 07-09-2017

Fingerprint

Jute fibers
Fatigue of materials
Composite materials
Curve fitting
Alkalies
Laminates
Surface properties
Sodium
Vacuum
Fabrication
Fibers

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Engineering(all)

Cite this

@article{ad3aec24d8cf4921a002f1a6285e7d34,
title = "Fatigue Behaviour and Life Assessment of Jute-epoxy Composites under Tension-Tension Loading",
abstract = "The present study involves fabrication and fatigue life assessment of multi-layered, woven jute fibres with epoxy matrix composites. Jute fabric were treated with 1N sodium hydroxidesolution for a duration of 6 hours. Alkali treatment was done to modify internal structure as well as surface properties of fibre. Laminates were fabricated by laying up multi layered woven jute fabric at varying angle [0-900/ (±450)2/0-900]. Vacuum bagging method was used to reduce the void content and thus increase the quality of composites. Tension-Tension fatigue tests were performed with a constant fatigue stress ratio (R=0.1) and results obtained from the tests were used to plot S-N Curve. A model based on power law equation was used for curve fitting.",
author = "Padmaraj, {N. H.} and Chethan, {K. N.} and Pavan and Anand Onkar",
year = "2017",
month = "9",
day = "7",
doi = "10.1088/1757-899X/225/1/012017",
language = "English",
volume = "225",
journal = "IOP Conference Series: Materials Science and Engineering",
issn = "1757-8981",
publisher = "IOP Publishing Ltd.",
number = "1",

}

Fatigue Behaviour and Life Assessment of Jute-epoxy Composites under Tension-Tension Loading. / Padmaraj, N. H.; Chethan, K. N.; Pavan; Onkar, Anand.

In: IOP Conference Series: Materials Science and Engineering, Vol. 225, No. 1, 012017, 07.09.2017.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Fatigue Behaviour and Life Assessment of Jute-epoxy Composites under Tension-Tension Loading

AU - Padmaraj, N. H.

AU - Chethan, K. N.

AU - Pavan,

AU - Onkar, Anand

PY - 2017/9/7

Y1 - 2017/9/7

N2 - The present study involves fabrication and fatigue life assessment of multi-layered, woven jute fibres with epoxy matrix composites. Jute fabric were treated with 1N sodium hydroxidesolution for a duration of 6 hours. Alkali treatment was done to modify internal structure as well as surface properties of fibre. Laminates were fabricated by laying up multi layered woven jute fabric at varying angle [0-900/ (±450)2/0-900]. Vacuum bagging method was used to reduce the void content and thus increase the quality of composites. Tension-Tension fatigue tests were performed with a constant fatigue stress ratio (R=0.1) and results obtained from the tests were used to plot S-N Curve. A model based on power law equation was used for curve fitting.

AB - The present study involves fabrication and fatigue life assessment of multi-layered, woven jute fibres with epoxy matrix composites. Jute fabric were treated with 1N sodium hydroxidesolution for a duration of 6 hours. Alkali treatment was done to modify internal structure as well as surface properties of fibre. Laminates were fabricated by laying up multi layered woven jute fabric at varying angle [0-900/ (±450)2/0-900]. Vacuum bagging method was used to reduce the void content and thus increase the quality of composites. Tension-Tension fatigue tests were performed with a constant fatigue stress ratio (R=0.1) and results obtained from the tests were used to plot S-N Curve. A model based on power law equation was used for curve fitting.

UR - http://www.scopus.com/inward/record.url?scp=85030316053&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85030316053&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/225/1/012017

DO - 10.1088/1757-899X/225/1/012017

M3 - Article

AN - SCOPUS:85030316053

VL - 225

JO - IOP Conference Series: Materials Science and Engineering

JF - IOP Conference Series: Materials Science and Engineering

SN - 1757-8981

IS - 1

M1 - 012017

ER -