Filter implementation using output transformer of UPS for power quality improvement

N. Anandh, Pramod Antony D'sa, M. V. Gautam, V. Sai Sandeep

Research output: Contribution to journalArticle

Abstract

Power electronics play a significant role in different areas of technology, more usage of power electronic devices lead to more harmonic content and various power quality issues in the system. Therefore, power quality gains more significance in the current era of research. Power electronics equipment’s with non-linear loads concludes with more harmonic disturbances and lower power factor. Harmonic impurities are the major problem ingredient due to the connection of non-linear load. To lessen the harmonics usually passive filters are used. The major objective of this work is to monitor and analyse the power quality of uninterrupted power supply by means of DAQ system that gathers real time data on the system and then the data is analysed using National Instruments LabVIEW. Once power quality analysis is done, a new technique of filter implementation using output transformer of the UPS was explored and passive filter was simulated using MATLAB/Simulink and then simulated filter was implemented in order to achieve power quality improvement.

Original languageEnglish
Pages (from-to)1251-1259
Number of pages9
JournalInternational Journal of Power Electronics and Drive Systems
Volume8
Issue number3
DOIs
Publication statusPublished - 01-09-2017

Fingerprint

Uninterruptible power systems
Power quality
Power electronics
Passive filters
MATLAB
Electronic equipment
Impurities

All Science Journal Classification (ASJC) codes

  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

Cite this

Anandh, N. ; D'sa, Pramod Antony ; Gautam, M. V. ; Sandeep, V. Sai. / Filter implementation using output transformer of UPS for power quality improvement. In: International Journal of Power Electronics and Drive Systems. 2017 ; Vol. 8, No. 3. pp. 1251-1259.
@article{a5c894db6f3140649fa2da72056072a0,
title = "Filter implementation using output transformer of UPS for power quality improvement",
abstract = "Power electronics play a significant role in different areas of technology, more usage of power electronic devices lead to more harmonic content and various power quality issues in the system. Therefore, power quality gains more significance in the current era of research. Power electronics equipment’s with non-linear loads concludes with more harmonic disturbances and lower power factor. Harmonic impurities are the major problem ingredient due to the connection of non-linear load. To lessen the harmonics usually passive filters are used. The major objective of this work is to monitor and analyse the power quality of uninterrupted power supply by means of DAQ system that gathers real time data on the system and then the data is analysed using National Instruments LabVIEW. Once power quality analysis is done, a new technique of filter implementation using output transformer of the UPS was explored and passive filter was simulated using MATLAB/Simulink and then simulated filter was implemented in order to achieve power quality improvement.",
author = "N. Anandh and D'sa, {Pramod Antony} and Gautam, {M. V.} and Sandeep, {V. Sai}",
year = "2017",
month = "9",
day = "1",
doi = "10.11591/ijpeds.v8i3.pp1251-1259",
language = "English",
volume = "8",
pages = "1251--1259",
journal = "International Journal of Power Electronics and Drive Systems",
issn = "2088-8694",
publisher = "Institute of Advanced Engineering and Science (IAES)",
number = "3",

}

Filter implementation using output transformer of UPS for power quality improvement. / Anandh, N.; D'sa, Pramod Antony; Gautam, M. V.; Sandeep, V. Sai.

In: International Journal of Power Electronics and Drive Systems, Vol. 8, No. 3, 01.09.2017, p. 1251-1259.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Filter implementation using output transformer of UPS for power quality improvement

AU - Anandh, N.

AU - D'sa, Pramod Antony

AU - Gautam, M. V.

AU - Sandeep, V. Sai

PY - 2017/9/1

Y1 - 2017/9/1

N2 - Power electronics play a significant role in different areas of technology, more usage of power electronic devices lead to more harmonic content and various power quality issues in the system. Therefore, power quality gains more significance in the current era of research. Power electronics equipment’s with non-linear loads concludes with more harmonic disturbances and lower power factor. Harmonic impurities are the major problem ingredient due to the connection of non-linear load. To lessen the harmonics usually passive filters are used. The major objective of this work is to monitor and analyse the power quality of uninterrupted power supply by means of DAQ system that gathers real time data on the system and then the data is analysed using National Instruments LabVIEW. Once power quality analysis is done, a new technique of filter implementation using output transformer of the UPS was explored and passive filter was simulated using MATLAB/Simulink and then simulated filter was implemented in order to achieve power quality improvement.

AB - Power electronics play a significant role in different areas of technology, more usage of power electronic devices lead to more harmonic content and various power quality issues in the system. Therefore, power quality gains more significance in the current era of research. Power electronics equipment’s with non-linear loads concludes with more harmonic disturbances and lower power factor. Harmonic impurities are the major problem ingredient due to the connection of non-linear load. To lessen the harmonics usually passive filters are used. The major objective of this work is to monitor and analyse the power quality of uninterrupted power supply by means of DAQ system that gathers real time data on the system and then the data is analysed using National Instruments LabVIEW. Once power quality analysis is done, a new technique of filter implementation using output transformer of the UPS was explored and passive filter was simulated using MATLAB/Simulink and then simulated filter was implemented in order to achieve power quality improvement.

UR - http://www.scopus.com/inward/record.url?scp=85042159401&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85042159401&partnerID=8YFLogxK

U2 - 10.11591/ijpeds.v8i3.pp1251-1259

DO - 10.11591/ijpeds.v8i3.pp1251-1259

M3 - Article

VL - 8

SP - 1251

EP - 1259

JO - International Journal of Power Electronics and Drive Systems

JF - International Journal of Power Electronics and Drive Systems

SN - 2088-8694

IS - 3

ER -