Flow analysis inside coated porous media

Ahmad Kamal Ismail, Mohd Zulkifly Abdullah, Abdul Rashid Jamaludin, Mohammed Zubair, Nor Haslina Ibrahim

Research output: Chapter in Book/Report/Conference proceedingChapter

Abstract

A numerical study has been done to investigate the flow inside porous media (PM). Foam type PM used in the study have been classified into different porosity. The different porosity was due to the fabrication technique which involved the dip coating process. Coating technique is known as a method to increase the performance of PM when used as a medium of combustion. In this study, CFD analysis had been performed with 2D models to observe the flow across the PM. The result shows that the CFD model has the ability to predict the pressure drop caused by different porosities on selected coating materials.

Original languageEnglish
Title of host publicationAdvanced Structured Materials
PublisherSpringer Verlag
Pages153-160
Number of pages8
DOIs
Publication statusPublished - 01-01-2019

Publication series

NameAdvanced Structured Materials
Volume102
ISSN (Print)1869-8433
ISSN (Electronic)1869-8441

Fingerprint

Porous materials
Porosity
Computational fluid dynamics
Coatings
Coating techniques
Pressure drop
Foams
Fabrication

All Science Journal Classification (ASJC) codes

  • Materials Science(all)

Cite this

Ismail, A. K., Abdullah, M. Z., Jamaludin, A. R., Zubair, M., & Ibrahim, N. H. (2019). Flow analysis inside coated porous media. In Advanced Structured Materials (pp. 153-160). (Advanced Structured Materials; Vol. 102). Springer Verlag. https://doi.org/10.1007/978-3-030-05621-6_13
Ismail, Ahmad Kamal ; Abdullah, Mohd Zulkifly ; Jamaludin, Abdul Rashid ; Zubair, Mohammed ; Ibrahim, Nor Haslina. / Flow analysis inside coated porous media. Advanced Structured Materials. Springer Verlag, 2019. pp. 153-160 (Advanced Structured Materials).
@inbook{cfe1552c03034f22a0b0181801f8d8c1,
title = "Flow analysis inside coated porous media",
abstract = "A numerical study has been done to investigate the flow inside porous media (PM). Foam type PM used in the study have been classified into different porosity. The different porosity was due to the fabrication technique which involved the dip coating process. Coating technique is known as a method to increase the performance of PM when used as a medium of combustion. In this study, CFD analysis had been performed with 2D models to observe the flow across the PM. The result shows that the CFD model has the ability to predict the pressure drop caused by different porosities on selected coating materials.",
author = "Ismail, {Ahmad Kamal} and Abdullah, {Mohd Zulkifly} and Jamaludin, {Abdul Rashid} and Mohammed Zubair and Ibrahim, {Nor Haslina}",
year = "2019",
month = "1",
day = "1",
doi = "10.1007/978-3-030-05621-6_13",
language = "English",
series = "Advanced Structured Materials",
publisher = "Springer Verlag",
pages = "153--160",
booktitle = "Advanced Structured Materials",
address = "Germany",

}

Ismail, AK, Abdullah, MZ, Jamaludin, AR, Zubair, M & Ibrahim, NH 2019, Flow analysis inside coated porous media. in Advanced Structured Materials. Advanced Structured Materials, vol. 102, Springer Verlag, pp. 153-160. https://doi.org/10.1007/978-3-030-05621-6_13

Flow analysis inside coated porous media. / Ismail, Ahmad Kamal; Abdullah, Mohd Zulkifly; Jamaludin, Abdul Rashid; Zubair, Mohammed; Ibrahim, Nor Haslina.

Advanced Structured Materials. Springer Verlag, 2019. p. 153-160 (Advanced Structured Materials; Vol. 102).

Research output: Chapter in Book/Report/Conference proceedingChapter

TY - CHAP

T1 - Flow analysis inside coated porous media

AU - Ismail, Ahmad Kamal

AU - Abdullah, Mohd Zulkifly

AU - Jamaludin, Abdul Rashid

AU - Zubair, Mohammed

AU - Ibrahim, Nor Haslina

PY - 2019/1/1

Y1 - 2019/1/1

N2 - A numerical study has been done to investigate the flow inside porous media (PM). Foam type PM used in the study have been classified into different porosity. The different porosity was due to the fabrication technique which involved the dip coating process. Coating technique is known as a method to increase the performance of PM when used as a medium of combustion. In this study, CFD analysis had been performed with 2D models to observe the flow across the PM. The result shows that the CFD model has the ability to predict the pressure drop caused by different porosities on selected coating materials.

AB - A numerical study has been done to investigate the flow inside porous media (PM). Foam type PM used in the study have been classified into different porosity. The different porosity was due to the fabrication technique which involved the dip coating process. Coating technique is known as a method to increase the performance of PM when used as a medium of combustion. In this study, CFD analysis had been performed with 2D models to observe the flow across the PM. The result shows that the CFD model has the ability to predict the pressure drop caused by different porosities on selected coating materials.

UR - http://www.scopus.com/inward/record.url?scp=85061026149&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85061026149&partnerID=8YFLogxK

U2 - 10.1007/978-3-030-05621-6_13

DO - 10.1007/978-3-030-05621-6_13

M3 - Chapter

T3 - Advanced Structured Materials

SP - 153

EP - 160

BT - Advanced Structured Materials

PB - Springer Verlag

ER -

Ismail AK, Abdullah MZ, Jamaludin AR, Zubair M, Ibrahim NH. Flow analysis inside coated porous media. In Advanced Structured Materials. Springer Verlag. 2019. p. 153-160. (Advanced Structured Materials). https://doi.org/10.1007/978-3-030-05621-6_13