GA based optimal location and size of the distributed generators in distribution system for different load conditions

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

In the recent past factors such as apprehensions over impacts of environmental aspects, distribution network improvement conditions, and other subsidised programs of the government have affected the distributed generators (DG) units count in commercial and domestic electrical power output. It is known that the optimal size and optimal placement of DG units may lead to low power losses, high voltage profiles. In real time scenario identifying an appropriate DG location and size is hard because of various system constraints. Therefore a method which can identify a optimum DG location and size is necessary. Using the method a power system with an acceptable reliability level and voltage profile can be designed. To serve this purpose in this paper a procedure/method which can calculate the optimum location for DG placement and appropriate DG size has been proposed. This method has been evaluated using a 14 bus distribution system. The optimization method has been designed using genetic algorithm (GA) and also for time varying loads.

Original languageEnglish
Title of host publication1st IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems, ICPEICES 2016
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)9781467385879
DOIs
Publication statusPublished - 13-02-2017
Event1st IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems, ICPEICES 2016 - Delhi, India
Duration: 04-07-201606-07-2016

Conference

Conference1st IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems, ICPEICES 2016
CountryIndia
CityDelhi
Period04-07-1606-07-16

Fingerprint

Optimal Location
Distribution System
Genetic algorithms
Genetic Algorithm
Generator
Electric potential
Electric power distribution
Placement
Voltage
Unit
Distribution Network
Power System
Optimization Methods
Time-varying
Count
Calculate
Scenarios
Necessary
Output

All Science Journal Classification (ASJC) codes

  • Computer Networks and Communications
  • Control and Optimization
  • Artificial Intelligence
  • Energy Engineering and Power Technology
  • Renewable Energy, Sustainability and the Environment
  • Electrical and Electronic Engineering

Cite this

Shivarudraswamy, R., Gaonkar, D. N., & Jayalakshmi, N. S. (2017). GA based optimal location and size of the distributed generators in distribution system for different load conditions. In 1st IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems, ICPEICES 2016 [7853256] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICPEICES.2016.7853256
Shivarudraswamy, R. ; Gaonkar, D. N. ; Jayalakshmi, N. S. / GA based optimal location and size of the distributed generators in distribution system for different load conditions. 1st IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems, ICPEICES 2016. Institute of Electrical and Electronics Engineers Inc., 2017.
@inproceedings{b1ce7fffd523493582589032ab123141,
title = "GA based optimal location and size of the distributed generators in distribution system for different load conditions",
abstract = "In the recent past factors such as apprehensions over impacts of environmental aspects, distribution network improvement conditions, and other subsidised programs of the government have affected the distributed generators (DG) units count in commercial and domestic electrical power output. It is known that the optimal size and optimal placement of DG units may lead to low power losses, high voltage profiles. In real time scenario identifying an appropriate DG location and size is hard because of various system constraints. Therefore a method which can identify a optimum DG location and size is necessary. Using the method a power system with an acceptable reliability level and voltage profile can be designed. To serve this purpose in this paper a procedure/method which can calculate the optimum location for DG placement and appropriate DG size has been proposed. This method has been evaluated using a 14 bus distribution system. The optimization method has been designed using genetic algorithm (GA) and also for time varying loads.",
author = "R. Shivarudraswamy and Gaonkar, {D. N.} and Jayalakshmi, {N. S.}",
year = "2017",
month = "2",
day = "13",
doi = "10.1109/ICPEICES.2016.7853256",
language = "English",
booktitle = "1st IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems, ICPEICES 2016",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
address = "United States",

}

Shivarudraswamy, R, Gaonkar, DN & Jayalakshmi, NS 2017, GA based optimal location and size of the distributed generators in distribution system for different load conditions. in 1st IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems, ICPEICES 2016., 7853256, Institute of Electrical and Electronics Engineers Inc., 1st IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems, ICPEICES 2016, Delhi, India, 04-07-16. https://doi.org/10.1109/ICPEICES.2016.7853256

GA based optimal location and size of the distributed generators in distribution system for different load conditions. / Shivarudraswamy, R.; Gaonkar, D. N.; Jayalakshmi, N. S.

1st IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems, ICPEICES 2016. Institute of Electrical and Electronics Engineers Inc., 2017. 7853256.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - GA based optimal location and size of the distributed generators in distribution system for different load conditions

AU - Shivarudraswamy, R.

AU - Gaonkar, D. N.

AU - Jayalakshmi, N. S.

PY - 2017/2/13

Y1 - 2017/2/13

N2 - In the recent past factors such as apprehensions over impacts of environmental aspects, distribution network improvement conditions, and other subsidised programs of the government have affected the distributed generators (DG) units count in commercial and domestic electrical power output. It is known that the optimal size and optimal placement of DG units may lead to low power losses, high voltage profiles. In real time scenario identifying an appropriate DG location and size is hard because of various system constraints. Therefore a method which can identify a optimum DG location and size is necessary. Using the method a power system with an acceptable reliability level and voltage profile can be designed. To serve this purpose in this paper a procedure/method which can calculate the optimum location for DG placement and appropriate DG size has been proposed. This method has been evaluated using a 14 bus distribution system. The optimization method has been designed using genetic algorithm (GA) and also for time varying loads.

AB - In the recent past factors such as apprehensions over impacts of environmental aspects, distribution network improvement conditions, and other subsidised programs of the government have affected the distributed generators (DG) units count in commercial and domestic electrical power output. It is known that the optimal size and optimal placement of DG units may lead to low power losses, high voltage profiles. In real time scenario identifying an appropriate DG location and size is hard because of various system constraints. Therefore a method which can identify a optimum DG location and size is necessary. Using the method a power system with an acceptable reliability level and voltage profile can be designed. To serve this purpose in this paper a procedure/method which can calculate the optimum location for DG placement and appropriate DG size has been proposed. This method has been evaluated using a 14 bus distribution system. The optimization method has been designed using genetic algorithm (GA) and also for time varying loads.

UR - http://www.scopus.com/inward/record.url?scp=85015819668&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85015819668&partnerID=8YFLogxK

U2 - 10.1109/ICPEICES.2016.7853256

DO - 10.1109/ICPEICES.2016.7853256

M3 - Conference contribution

AN - SCOPUS:85015819668

BT - 1st IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems, ICPEICES 2016

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Shivarudraswamy R, Gaonkar DN, Jayalakshmi NS. GA based optimal location and size of the distributed generators in distribution system for different load conditions. In 1st IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems, ICPEICES 2016. Institute of Electrical and Electronics Engineers Inc. 2017. 7853256 https://doi.org/10.1109/ICPEICES.2016.7853256