How to handle a poorly placed femoral tunnel

Konsei Shino, Alberto Gobbi, Norimasa Nakamura, Anup Kumar, Tatsuo Mae

Research output: Chapter in Book/Report/Conference proceedingChapter

1 Citation (Scopus)

Abstract

Majority of primary anterior cruciate ligament reconstruction (ACLR) failures are caused by non-anatomically positioned femoral tunnels. They are predominantly anteriorly-proximally located by trans-tibial tunnel techniques for fear of posterior cortical blowout. For revision ACLR, it is important to avoid overlapping tunnels. The anatomic rectangular tunnel ACL reconstruction (ART ACLR) with a 10-mm wide bone-patellar tendon-bone (BTB) graft was developed to mimic natural fiber arrangement inside the native ACL, and to minimize space between the tunnel wall and the bone plug. As parallelepiped tunnels with a cross-sectional area of 50 mm2 in ART ACLR are smaller in aperture than 10-mm cylindrical tunnels with that of 79 mm2 in conventional techniques, the rectangular tunnels in revision ACLR may be less frequently compromised by non-anatomic previous tunnels. With this technique, we could more consistently create anatomically correct tunnels without tunnel-overlapping in one-stage revision ACLR. In case that the tunnel-overlapping is unavoidable, the route of over-the-top of the lateral condyle could be an acceptable option instead of the tunnel technique. Femoral tunnel malposition is a common situation in revision ACL reconstruction. Several factors must be considered prior to surgery. These include existing tunnel position, tunnel enlargement, presence of hardware, and graft selection for revision surgery. In this chapter, we will discuss the approach to femoral tunnel revision as well as techniques to handle various situations. We will also discuss our over-the-top technique and our recently described anatomical rectangular tunnel technique.

Original languageEnglish
Title of host publicationRevision ACL Reconstruction
Subtitle of host publicationIndications and Technique
PublisherSpringer New York
Pages87-96
Number of pages10
Volume9781461407669
ISBN (Electronic)9781461407669
ISBN (Print)1461407656, 9781461407652
DOIs
Publication statusPublished - 01-11-2014
Externally publishedYes

Fingerprint

Anterior Cruciate Ligament Reconstruction
Thigh
Bone-Patellar Tendon-Bone Grafts
Bone and Bones
Reoperation
Fear
Transplants

All Science Journal Classification (ASJC) codes

  • Medicine(all)

Cite this

Shino, K., Gobbi, A., Nakamura, N., Kumar, A., & Mae, T. (2014). How to handle a poorly placed femoral tunnel. In Revision ACL Reconstruction: Indications and Technique (Vol. 9781461407669, pp. 87-96). Springer New York. https://doi.org/10.1007/978-1-4614-0766-9_9
Shino, Konsei ; Gobbi, Alberto ; Nakamura, Norimasa ; Kumar, Anup ; Mae, Tatsuo. / How to handle a poorly placed femoral tunnel. Revision ACL Reconstruction: Indications and Technique. Vol. 9781461407669 Springer New York, 2014. pp. 87-96
@inbook{f6440caa4bbd412b8c082773d4880675,
title = "How to handle a poorly placed femoral tunnel",
abstract = "Majority of primary anterior cruciate ligament reconstruction (ACLR) failures are caused by non-anatomically positioned femoral tunnels. They are predominantly anteriorly-proximally located by trans-tibial tunnel techniques for fear of posterior cortical blowout. For revision ACLR, it is important to avoid overlapping tunnels. The anatomic rectangular tunnel ACL reconstruction (ART ACLR) with a 10-mm wide bone-patellar tendon-bone (BTB) graft was developed to mimic natural fiber arrangement inside the native ACL, and to minimize space between the tunnel wall and the bone plug. As parallelepiped tunnels with a cross-sectional area of 50 mm2 in ART ACLR are smaller in aperture than 10-mm cylindrical tunnels with that of 79 mm2 in conventional techniques, the rectangular tunnels in revision ACLR may be less frequently compromised by non-anatomic previous tunnels. With this technique, we could more consistently create anatomically correct tunnels without tunnel-overlapping in one-stage revision ACLR. In case that the tunnel-overlapping is unavoidable, the route of over-the-top of the lateral condyle could be an acceptable option instead of the tunnel technique. Femoral tunnel malposition is a common situation in revision ACL reconstruction. Several factors must be considered prior to surgery. These include existing tunnel position, tunnel enlargement, presence of hardware, and graft selection for revision surgery. In this chapter, we will discuss the approach to femoral tunnel revision as well as techniques to handle various situations. We will also discuss our over-the-top technique and our recently described anatomical rectangular tunnel technique.",
author = "Konsei Shino and Alberto Gobbi and Norimasa Nakamura and Anup Kumar and Tatsuo Mae",
year = "2014",
month = "11",
day = "1",
doi = "10.1007/978-1-4614-0766-9_9",
language = "English",
isbn = "1461407656",
volume = "9781461407669",
pages = "87--96",
booktitle = "Revision ACL Reconstruction",
publisher = "Springer New York",
address = "United States",

}

Shino, K, Gobbi, A, Nakamura, N, Kumar, A & Mae, T 2014, How to handle a poorly placed femoral tunnel. in Revision ACL Reconstruction: Indications and Technique. vol. 9781461407669, Springer New York, pp. 87-96. https://doi.org/10.1007/978-1-4614-0766-9_9

How to handle a poorly placed femoral tunnel. / Shino, Konsei; Gobbi, Alberto; Nakamura, Norimasa; Kumar, Anup; Mae, Tatsuo.

Revision ACL Reconstruction: Indications and Technique. Vol. 9781461407669 Springer New York, 2014. p. 87-96.

Research output: Chapter in Book/Report/Conference proceedingChapter

TY - CHAP

T1 - How to handle a poorly placed femoral tunnel

AU - Shino, Konsei

AU - Gobbi, Alberto

AU - Nakamura, Norimasa

AU - Kumar, Anup

AU - Mae, Tatsuo

PY - 2014/11/1

Y1 - 2014/11/1

N2 - Majority of primary anterior cruciate ligament reconstruction (ACLR) failures are caused by non-anatomically positioned femoral tunnels. They are predominantly anteriorly-proximally located by trans-tibial tunnel techniques for fear of posterior cortical blowout. For revision ACLR, it is important to avoid overlapping tunnels. The anatomic rectangular tunnel ACL reconstruction (ART ACLR) with a 10-mm wide bone-patellar tendon-bone (BTB) graft was developed to mimic natural fiber arrangement inside the native ACL, and to minimize space between the tunnel wall and the bone plug. As parallelepiped tunnels with a cross-sectional area of 50 mm2 in ART ACLR are smaller in aperture than 10-mm cylindrical tunnels with that of 79 mm2 in conventional techniques, the rectangular tunnels in revision ACLR may be less frequently compromised by non-anatomic previous tunnels. With this technique, we could more consistently create anatomically correct tunnels without tunnel-overlapping in one-stage revision ACLR. In case that the tunnel-overlapping is unavoidable, the route of over-the-top of the lateral condyle could be an acceptable option instead of the tunnel technique. Femoral tunnel malposition is a common situation in revision ACL reconstruction. Several factors must be considered prior to surgery. These include existing tunnel position, tunnel enlargement, presence of hardware, and graft selection for revision surgery. In this chapter, we will discuss the approach to femoral tunnel revision as well as techniques to handle various situations. We will also discuss our over-the-top technique and our recently described anatomical rectangular tunnel technique.

AB - Majority of primary anterior cruciate ligament reconstruction (ACLR) failures are caused by non-anatomically positioned femoral tunnels. They are predominantly anteriorly-proximally located by trans-tibial tunnel techniques for fear of posterior cortical blowout. For revision ACLR, it is important to avoid overlapping tunnels. The anatomic rectangular tunnel ACL reconstruction (ART ACLR) with a 10-mm wide bone-patellar tendon-bone (BTB) graft was developed to mimic natural fiber arrangement inside the native ACL, and to minimize space between the tunnel wall and the bone plug. As parallelepiped tunnels with a cross-sectional area of 50 mm2 in ART ACLR are smaller in aperture than 10-mm cylindrical tunnels with that of 79 mm2 in conventional techniques, the rectangular tunnels in revision ACLR may be less frequently compromised by non-anatomic previous tunnels. With this technique, we could more consistently create anatomically correct tunnels without tunnel-overlapping in one-stage revision ACLR. In case that the tunnel-overlapping is unavoidable, the route of over-the-top of the lateral condyle could be an acceptable option instead of the tunnel technique. Femoral tunnel malposition is a common situation in revision ACL reconstruction. Several factors must be considered prior to surgery. These include existing tunnel position, tunnel enlargement, presence of hardware, and graft selection for revision surgery. In this chapter, we will discuss the approach to femoral tunnel revision as well as techniques to handle various situations. We will also discuss our over-the-top technique and our recently described anatomical rectangular tunnel technique.

UR - http://www.scopus.com/inward/record.url?scp=84949176990&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84949176990&partnerID=8YFLogxK

U2 - 10.1007/978-1-4614-0766-9_9

DO - 10.1007/978-1-4614-0766-9_9

M3 - Chapter

SN - 1461407656

SN - 9781461407652

VL - 9781461407669

SP - 87

EP - 96

BT - Revision ACL Reconstruction

PB - Springer New York

ER -

Shino K, Gobbi A, Nakamura N, Kumar A, Mae T. How to handle a poorly placed femoral tunnel. In Revision ACL Reconstruction: Indications and Technique. Vol. 9781461407669. Springer New York. 2014. p. 87-96 https://doi.org/10.1007/978-1-4614-0766-9_9