Mechanical characterization and optimization of heat treatment parameters of manganese alloyed austempered ductile iron

Ananda Hegde, Sathyashankara Sharma, Ramakrishna Vikas Sadanand

Research output: Contribution to journalArticle

Abstract

Austempered Ductile Iron (ADI) belongs to the family of cast irons whose mechanical properties are altered using austempering heat treatment process. The objective of this paper is to study the effects of heat treatment parameters on manganese alloyed ADI. Hence, austenitization temperature, austempering temperature and austempering time are taken as the control variables along with the manganese content in the material. The effects of heat treatment are studied by measuring the ultimate tensile strength and the hardness of the material. The regression equations are developed to relate the various parameters under study. The microstructures of the specimen reveal that retained austenite content increases with increase in manganese and results in decrease in hardness of the material. The statistical analyses indicate that the austempering temperature is the major factor affecting the variation in hardness and tensile strength with 74.5 % of contribution within the range of values whereas, variation in manganese content does not have significant effect on hardness within the investigated composition range in the material.

Original languageEnglish
Pages (from-to)4356-4367
Number of pages12
JournalJournal of Mechanical Engineering and Sciences
Volume13
Issue number1
DOIs
Publication statusPublished - 01-03-2019

Fingerprint

Nodular iron
Manganese
Hardness
Heat treatment
Tensile strength
Cast iron
Austenite
Temperature
Mechanical properties
Microstructure
Chemical analysis

All Science Journal Classification (ASJC) codes

  • Computational Mechanics
  • Fuel Technology
  • Energy Engineering and Power Technology
  • Mechanics of Materials
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Cite this

@article{87d73d325edc4a9097d9136cb44b6c06,
title = "Mechanical characterization and optimization of heat treatment parameters of manganese alloyed austempered ductile iron",
abstract = "Austempered Ductile Iron (ADI) belongs to the family of cast irons whose mechanical properties are altered using austempering heat treatment process. The objective of this paper is to study the effects of heat treatment parameters on manganese alloyed ADI. Hence, austenitization temperature, austempering temperature and austempering time are taken as the control variables along with the manganese content in the material. The effects of heat treatment are studied by measuring the ultimate tensile strength and the hardness of the material. The regression equations are developed to relate the various parameters under study. The microstructures of the specimen reveal that retained austenite content increases with increase in manganese and results in decrease in hardness of the material. The statistical analyses indicate that the austempering temperature is the major factor affecting the variation in hardness and tensile strength with 74.5 {\%} of contribution within the range of values whereas, variation in manganese content does not have significant effect on hardness within the investigated composition range in the material.",
author = "Ananda Hegde and Sathyashankara Sharma and Sadanand, {Ramakrishna Vikas}",
year = "2019",
month = "3",
day = "1",
doi = "10.15282/jmes.13.1.2019.01.0371_rfseq1",
language = "English",
volume = "13",
pages = "4356--4367",
journal = "Journal of Mechanical Engineering and Sciences",
issn = "2289-4659",
publisher = "Faculty of Mechanical Engineering, Universiti Malaysia Pahang",
number = "1",

}

Mechanical characterization and optimization of heat treatment parameters of manganese alloyed austempered ductile iron. / Hegde, Ananda; Sharma, Sathyashankara; Sadanand, Ramakrishna Vikas.

In: Journal of Mechanical Engineering and Sciences, Vol. 13, No. 1, 01.03.2019, p. 4356-4367.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Mechanical characterization and optimization of heat treatment parameters of manganese alloyed austempered ductile iron

AU - Hegde, Ananda

AU - Sharma, Sathyashankara

AU - Sadanand, Ramakrishna Vikas

PY - 2019/3/1

Y1 - 2019/3/1

N2 - Austempered Ductile Iron (ADI) belongs to the family of cast irons whose mechanical properties are altered using austempering heat treatment process. The objective of this paper is to study the effects of heat treatment parameters on manganese alloyed ADI. Hence, austenitization temperature, austempering temperature and austempering time are taken as the control variables along with the manganese content in the material. The effects of heat treatment are studied by measuring the ultimate tensile strength and the hardness of the material. The regression equations are developed to relate the various parameters under study. The microstructures of the specimen reveal that retained austenite content increases with increase in manganese and results in decrease in hardness of the material. The statistical analyses indicate that the austempering temperature is the major factor affecting the variation in hardness and tensile strength with 74.5 % of contribution within the range of values whereas, variation in manganese content does not have significant effect on hardness within the investigated composition range in the material.

AB - Austempered Ductile Iron (ADI) belongs to the family of cast irons whose mechanical properties are altered using austempering heat treatment process. The objective of this paper is to study the effects of heat treatment parameters on manganese alloyed ADI. Hence, austenitization temperature, austempering temperature and austempering time are taken as the control variables along with the manganese content in the material. The effects of heat treatment are studied by measuring the ultimate tensile strength and the hardness of the material. The regression equations are developed to relate the various parameters under study. The microstructures of the specimen reveal that retained austenite content increases with increase in manganese and results in decrease in hardness of the material. The statistical analyses indicate that the austempering temperature is the major factor affecting the variation in hardness and tensile strength with 74.5 % of contribution within the range of values whereas, variation in manganese content does not have significant effect on hardness within the investigated composition range in the material.

UR - http://www.scopus.com/inward/record.url?scp=85065494978&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85065494978&partnerID=8YFLogxK

U2 - 10.15282/jmes.13.1.2019.01.0371_rfseq1

DO - 10.15282/jmes.13.1.2019.01.0371_rfseq1

M3 - Article

AN - SCOPUS:85065494978

VL - 13

SP - 4356

EP - 4367

JO - Journal of Mechanical Engineering and Sciences

JF - Journal of Mechanical Engineering and Sciences

SN - 2289-4659

IS - 1

ER -