Mechanical characterization of aluminum 6061 with B4C and high entropy alloys

Munnangi Rishi, Satyanarayana Raju Chv, Laxmikant G. Keni, N. H. Padmaraj, K. N. Chethan

Research output: Contribution to journalArticle

Abstract

Aluminum matrix-based materials are widely used in aircraft, automobile industries due to its lightweight to strength ratio. Globally, researchers focus on developing the materials with lower density with high strength. In the present study, Aluminum 6061 is reinforced with B4C and High entropy alloys (HEA) particles. The specimens were prepared by the stir casting process. Three different samples were prepared by varying the composition of the B4C particles as 1% with 0.2% of HEA, 2% of B4C with 0.4% HEA and 3% of B4C with 0.6% of HEA. The mechanical characterization of samples showed a considerable increase in the hardness withthe increase of the reinforcements. The Aluminum 6061 with 2% B4C and 0.4% HEA were shown comparatively better tensile and hardness property, as compared to the other two samples.

Original languageEnglish
Article numberIJMPERDOCT201946
Pages (from-to)527-538
Number of pages12
JournalInternational Journal of Mechanical and Production Engineering Research and Development
Volume9
Issue number5
DOIs
Publication statusPublished - 01-10-2019

Fingerprint

Aluminum
Entropy
Hardness
Automotive industry
Reinforcement
Casting
Aircraft
Chemical analysis

All Science Journal Classification (ASJC) codes

  • Aerospace Engineering
  • Mechanical Engineering
  • Fluid Flow and Transfer Processes

Cite this

Rishi, Munnangi ; Chv, Satyanarayana Raju ; Keni, Laxmikant G. ; Padmaraj, N. H. ; Chethan, K. N. / Mechanical characterization of aluminum 6061 with B4C and high entropy alloys. In: International Journal of Mechanical and Production Engineering Research and Development. 2019 ; Vol. 9, No. 5. pp. 527-538.
@article{2006fd400e8740ad92bd48923a704320,
title = "Mechanical characterization of aluminum 6061 with B4C and high entropy alloys",
abstract = "Aluminum matrix-based materials are widely used in aircraft, automobile industries due to its lightweight to strength ratio. Globally, researchers focus on developing the materials with lower density with high strength. In the present study, Aluminum 6061 is reinforced with B4C and High entropy alloys (HEA) particles. The specimens were prepared by the stir casting process. Three different samples were prepared by varying the composition of the B4C particles as 1{\%} with 0.2{\%} of HEA, 2{\%} of B4C with 0.4{\%} HEA and 3{\%} of B4C with 0.6{\%} of HEA. The mechanical characterization of samples showed a considerable increase in the hardness withthe increase of the reinforcements. The Aluminum 6061 with 2{\%} B4C and 0.4{\%} HEA were shown comparatively better tensile and hardness property, as compared to the other two samples.",
author = "Munnangi Rishi and Chv, {Satyanarayana Raju} and Keni, {Laxmikant G.} and Padmaraj, {N. H.} and Chethan, {K. N.}",
year = "2019",
month = "10",
day = "1",
doi = "10.24247/ijmperdoct201946",
language = "English",
volume = "9",
pages = "527--538",
journal = "International Journal of Mechanical and Production Engineering Research and Development",
issn = "2249-6890",
publisher = "Transstellar Journal Publications and Research Consultancy Private Limited (TJPRC)",
number = "5",

}

Mechanical characterization of aluminum 6061 with B4C and high entropy alloys. / Rishi, Munnangi; Chv, Satyanarayana Raju; Keni, Laxmikant G.; Padmaraj, N. H.; Chethan, K. N.

In: International Journal of Mechanical and Production Engineering Research and Development, Vol. 9, No. 5, IJMPERDOCT201946, 01.10.2019, p. 527-538.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Mechanical characterization of aluminum 6061 with B4C and high entropy alloys

AU - Rishi, Munnangi

AU - Chv, Satyanarayana Raju

AU - Keni, Laxmikant G.

AU - Padmaraj, N. H.

AU - Chethan, K. N.

PY - 2019/10/1

Y1 - 2019/10/1

N2 - Aluminum matrix-based materials are widely used in aircraft, automobile industries due to its lightweight to strength ratio. Globally, researchers focus on developing the materials with lower density with high strength. In the present study, Aluminum 6061 is reinforced with B4C and High entropy alloys (HEA) particles. The specimens were prepared by the stir casting process. Three different samples were prepared by varying the composition of the B4C particles as 1% with 0.2% of HEA, 2% of B4C with 0.4% HEA and 3% of B4C with 0.6% of HEA. The mechanical characterization of samples showed a considerable increase in the hardness withthe increase of the reinforcements. The Aluminum 6061 with 2% B4C and 0.4% HEA were shown comparatively better tensile and hardness property, as compared to the other two samples.

AB - Aluminum matrix-based materials are widely used in aircraft, automobile industries due to its lightweight to strength ratio. Globally, researchers focus on developing the materials with lower density with high strength. In the present study, Aluminum 6061 is reinforced with B4C and High entropy alloys (HEA) particles. The specimens were prepared by the stir casting process. Three different samples were prepared by varying the composition of the B4C particles as 1% with 0.2% of HEA, 2% of B4C with 0.4% HEA and 3% of B4C with 0.6% of HEA. The mechanical characterization of samples showed a considerable increase in the hardness withthe increase of the reinforcements. The Aluminum 6061 with 2% B4C and 0.4% HEA were shown comparatively better tensile and hardness property, as compared to the other two samples.

UR - http://www.scopus.com/inward/record.url?scp=85073556231&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85073556231&partnerID=8YFLogxK

U2 - 10.24247/ijmperdoct201946

DO - 10.24247/ijmperdoct201946

M3 - Article

AN - SCOPUS:85073556231

VL - 9

SP - 527

EP - 538

JO - International Journal of Mechanical and Production Engineering Research and Development

JF - International Journal of Mechanical and Production Engineering Research and Development

SN - 2249-6890

IS - 5

M1 - IJMPERDOCT201946

ER -