Modeling of cantilever type piezoelectric polymer actuator

Aparna, P. Navin Karanth, S. M. Kulkarni

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Among the various types of actuators available, piezoelectric materials are very promising on account of its miniaturization which results in making the products more compact and light. These materials are capable of producing large forces and precise displacement at higher efficiency and exhibit a linear property. This work mainly emphasizes on the behavior of the cantilever beam when piezoelectric actuation is carried out using PVDF layers. Piezoelectric actuators directly use the electric field induced strain which is derived from piezoelectric coefficients d31, d33. A design concept for bi-layered piezoelectric actuation using the d31 mode using PVDF as the material is emphasized here. The maximum tip deflection of the cantilever beam is studied for driving voltages of 90-140 V in the steps of 10V for three different thicknesses where the stacking of 2 layers is carried out in 4 actuation configurations namely PESP, PERP, SESP, SERP. The results obtained for bi-layer actuator is compared with single layer and the equivalent single layer thick actuator. All this is achieved by creating a finite element model for the cantilever beam in a FEM tool. The modelling is done in a real time scenario where the gluing layer, packaging layers, copper electrodes, Silver Ink are also considered to do a realistic analysis.

Original languageEnglish
Title of host publication2018 3rd International Conference on Control and Robotics Engineering, ICCRE 2018
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages274-279
Number of pages6
ISBN (Electronic)9781538666630
DOIs
Publication statusPublished - 08-06-2018
Externally publishedYes
Event3rd International Conference on Control and Robotics Engineering, ICCRE 2018 - Nagoya, Japan
Duration: 20-04-201823-04-2018

Conference

Conference3rd International Conference on Control and Robotics Engineering, ICCRE 2018
CountryJapan
CityNagoya
Period20-04-1823-04-18

Fingerprint

Cantilever beams
Actuators
Polymers
Deflection (structures)
Gluing
Piezoelectric materials
Piezoelectric actuators
Ink
Packaging
Silver
Electric fields
Copper
Finite element method
Electrodes
Electric potential

All Science Journal Classification (ASJC) codes

  • Artificial Intelligence
  • Mechanical Engineering
  • Computational Mechanics

Cite this

Aparna, Karanth, P. N., & Kulkarni, S. M. (2018). Modeling of cantilever type piezoelectric polymer actuator. In 2018 3rd International Conference on Control and Robotics Engineering, ICCRE 2018 (pp. 274-279). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICCRE.2018.8376479
Aparna ; Karanth, P. Navin ; Kulkarni, S. M. / Modeling of cantilever type piezoelectric polymer actuator. 2018 3rd International Conference on Control and Robotics Engineering, ICCRE 2018. Institute of Electrical and Electronics Engineers Inc., 2018. pp. 274-279
@inproceedings{24e24260a7fa4a5ba50aa89bbaca9d1d,
title = "Modeling of cantilever type piezoelectric polymer actuator",
abstract = "Among the various types of actuators available, piezoelectric materials are very promising on account of its miniaturization which results in making the products more compact and light. These materials are capable of producing large forces and precise displacement at higher efficiency and exhibit a linear property. This work mainly emphasizes on the behavior of the cantilever beam when piezoelectric actuation is carried out using PVDF layers. Piezoelectric actuators directly use the electric field induced strain which is derived from piezoelectric coefficients d31, d33. A design concept for bi-layered piezoelectric actuation using the d31 mode using PVDF as the material is emphasized here. The maximum tip deflection of the cantilever beam is studied for driving voltages of 90-140 V in the steps of 10V for three different thicknesses where the stacking of 2 layers is carried out in 4 actuation configurations namely PESP, PERP, SESP, SERP. The results obtained for bi-layer actuator is compared with single layer and the equivalent single layer thick actuator. All this is achieved by creating a finite element model for the cantilever beam in a FEM tool. The modelling is done in a real time scenario where the gluing layer, packaging layers, copper electrodes, Silver Ink are also considered to do a realistic analysis.",
author = "Aparna and Karanth, {P. Navin} and Kulkarni, {S. M.}",
year = "2018",
month = "6",
day = "8",
doi = "10.1109/ICCRE.2018.8376479",
language = "English",
pages = "274--279",
booktitle = "2018 3rd International Conference on Control and Robotics Engineering, ICCRE 2018",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
address = "United States",

}

Aparna, Karanth, PN & Kulkarni, SM 2018, Modeling of cantilever type piezoelectric polymer actuator. in 2018 3rd International Conference on Control and Robotics Engineering, ICCRE 2018. Institute of Electrical and Electronics Engineers Inc., pp. 274-279, 3rd International Conference on Control and Robotics Engineering, ICCRE 2018, Nagoya, Japan, 20-04-18. https://doi.org/10.1109/ICCRE.2018.8376479

Modeling of cantilever type piezoelectric polymer actuator. / Aparna; Karanth, P. Navin; Kulkarni, S. M.

2018 3rd International Conference on Control and Robotics Engineering, ICCRE 2018. Institute of Electrical and Electronics Engineers Inc., 2018. p. 274-279.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Modeling of cantilever type piezoelectric polymer actuator

AU - Aparna,

AU - Karanth, P. Navin

AU - Kulkarni, S. M.

PY - 2018/6/8

Y1 - 2018/6/8

N2 - Among the various types of actuators available, piezoelectric materials are very promising on account of its miniaturization which results in making the products more compact and light. These materials are capable of producing large forces and precise displacement at higher efficiency and exhibit a linear property. This work mainly emphasizes on the behavior of the cantilever beam when piezoelectric actuation is carried out using PVDF layers. Piezoelectric actuators directly use the electric field induced strain which is derived from piezoelectric coefficients d31, d33. A design concept for bi-layered piezoelectric actuation using the d31 mode using PVDF as the material is emphasized here. The maximum tip deflection of the cantilever beam is studied for driving voltages of 90-140 V in the steps of 10V for three different thicknesses where the stacking of 2 layers is carried out in 4 actuation configurations namely PESP, PERP, SESP, SERP. The results obtained for bi-layer actuator is compared with single layer and the equivalent single layer thick actuator. All this is achieved by creating a finite element model for the cantilever beam in a FEM tool. The modelling is done in a real time scenario where the gluing layer, packaging layers, copper electrodes, Silver Ink are also considered to do a realistic analysis.

AB - Among the various types of actuators available, piezoelectric materials are very promising on account of its miniaturization which results in making the products more compact and light. These materials are capable of producing large forces and precise displacement at higher efficiency and exhibit a linear property. This work mainly emphasizes on the behavior of the cantilever beam when piezoelectric actuation is carried out using PVDF layers. Piezoelectric actuators directly use the electric field induced strain which is derived from piezoelectric coefficients d31, d33. A design concept for bi-layered piezoelectric actuation using the d31 mode using PVDF as the material is emphasized here. The maximum tip deflection of the cantilever beam is studied for driving voltages of 90-140 V in the steps of 10V for three different thicknesses where the stacking of 2 layers is carried out in 4 actuation configurations namely PESP, PERP, SESP, SERP. The results obtained for bi-layer actuator is compared with single layer and the equivalent single layer thick actuator. All this is achieved by creating a finite element model for the cantilever beam in a FEM tool. The modelling is done in a real time scenario where the gluing layer, packaging layers, copper electrodes, Silver Ink are also considered to do a realistic analysis.

UR - http://www.scopus.com/inward/record.url?scp=85050779970&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85050779970&partnerID=8YFLogxK

U2 - 10.1109/ICCRE.2018.8376479

DO - 10.1109/ICCRE.2018.8376479

M3 - Conference contribution

SP - 274

EP - 279

BT - 2018 3rd International Conference on Control and Robotics Engineering, ICCRE 2018

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Aparna, Karanth PN, Kulkarni SM. Modeling of cantilever type piezoelectric polymer actuator. In 2018 3rd International Conference on Control and Robotics Engineering, ICCRE 2018. Institute of Electrical and Electronics Engineers Inc. 2018. p. 274-279 https://doi.org/10.1109/ICCRE.2018.8376479