Optical properties of sub-surface silver nanoparticulate films on 8 MeV electron beam irradiated polymer blends

S. C. Gurumurthy, Manjunatha Pattabi, Ganesh Sanjeev

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Results of the investigations carried out on the optical properties of silver nanoparticulate films deposited on the electron beam irradiated blends of polystyrene (PS) and poly(4-vinylpyridine) (P4VP) are reported. Sub-surface silver particulate films are deposited at a constant deposition rate of 0.4 nm/s on irradiated blends held at 455 K in a vacuum of 8 × 10−6 torr. The optical absorption studies indicate that the morphology of the nanoparticulate films can be tuned by electron beam irradiation of polymer blends. The change observed due to irradiation is attributed to the formation of free radicals, thereby altering the polymer–metal interaction. A shift in the plasmon resonance peak towards longer wavelengths is observed for 50 nm thick silver particulate films deposited on softened 8 MeV electron irradiated P4VP as compared to unirradiated P4VP. The shift is more in the case of P4VP than for PS, possibly due to the combined effect of free radicals produced by irradiation and the lone pair of electrons present in P4VP in enhancing the metal–polymer interaction. The saturation of free radicals takes place in P4VP at doses higher than 25 kGy. Further, the results also indicate that the free radical creation due to irradiation is more in PS than in P4VP, as the saturation takes place at lower doses in a PS/P4VP blend as compared to P4VP and in a blend with higher PS content. X-ray diffraction studies on silver films deposited on unirradiated and irradiated, softened polystyrene substrates do not show any significant change due to irradiation.

Original languageEnglish
Pages (from-to)4612-4616
Number of pages5
JournalJournal of Materials Science: Materials in Electronics
Volume25
Issue number10
DOIs
Publication statusPublished - 2014

Fingerprint

polymer blends
Polymer blends
Silver
Electron beams
Polystyrenes
polystyrene
Optical properties
silver
electron beams
Free radicals
optical properties
free radicals
Irradiation
irradiation
Free Radicals
particulates
saturation
dosage
Electrons
shift

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Atomic and Molecular Physics, and Optics
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Cite this

@article{02b81618bc0d4e63b3e1654a82d3c64c,
title = "Optical properties of sub-surface silver nanoparticulate films on 8 MeV electron beam irradiated polymer blends",
abstract = "Results of the investigations carried out on the optical properties of silver nanoparticulate films deposited on the electron beam irradiated blends of polystyrene (PS) and poly(4-vinylpyridine) (P4VP) are reported. Sub-surface silver particulate films are deposited at a constant deposition rate of 0.4 nm/s on irradiated blends held at 455 K in a vacuum of 8 × 10−6 torr. The optical absorption studies indicate that the morphology of the nanoparticulate films can be tuned by electron beam irradiation of polymer blends. The change observed due to irradiation is attributed to the formation of free radicals, thereby altering the polymer–metal interaction. A shift in the plasmon resonance peak towards longer wavelengths is observed for 50 nm thick silver particulate films deposited on softened 8 MeV electron irradiated P4VP as compared to unirradiated P4VP. The shift is more in the case of P4VP than for PS, possibly due to the combined effect of free radicals produced by irradiation and the lone pair of electrons present in P4VP in enhancing the metal–polymer interaction. The saturation of free radicals takes place in P4VP at doses higher than 25 kGy. Further, the results also indicate that the free radical creation due to irradiation is more in PS than in P4VP, as the saturation takes place at lower doses in a PS/P4VP blend as compared to P4VP and in a blend with higher PS content. X-ray diffraction studies on silver films deposited on unirradiated and irradiated, softened polystyrene substrates do not show any significant change due to irradiation.",
author = "Gurumurthy, {S. C.} and Manjunatha Pattabi and Ganesh Sanjeev",
year = "2014",
doi = "10.1007/s10854-014-2211-9",
language = "English",
volume = "25",
pages = "4612--4616",
journal = "Journal of Materials Science: Materials in Electronics",
issn = "0957-4522",
publisher = "Springer New York",
number = "10",

}

Optical properties of sub-surface silver nanoparticulate films on 8 MeV electron beam irradiated polymer blends. / Gurumurthy, S. C.; Pattabi, Manjunatha; Sanjeev, Ganesh.

In: Journal of Materials Science: Materials in Electronics, Vol. 25, No. 10, 2014, p. 4612-4616.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Optical properties of sub-surface silver nanoparticulate films on 8 MeV electron beam irradiated polymer blends

AU - Gurumurthy, S. C.

AU - Pattabi, Manjunatha

AU - Sanjeev, Ganesh

PY - 2014

Y1 - 2014

N2 - Results of the investigations carried out on the optical properties of silver nanoparticulate films deposited on the electron beam irradiated blends of polystyrene (PS) and poly(4-vinylpyridine) (P4VP) are reported. Sub-surface silver particulate films are deposited at a constant deposition rate of 0.4 nm/s on irradiated blends held at 455 K in a vacuum of 8 × 10−6 torr. The optical absorption studies indicate that the morphology of the nanoparticulate films can be tuned by electron beam irradiation of polymer blends. The change observed due to irradiation is attributed to the formation of free radicals, thereby altering the polymer–metal interaction. A shift in the plasmon resonance peak towards longer wavelengths is observed for 50 nm thick silver particulate films deposited on softened 8 MeV electron irradiated P4VP as compared to unirradiated P4VP. The shift is more in the case of P4VP than for PS, possibly due to the combined effect of free radicals produced by irradiation and the lone pair of electrons present in P4VP in enhancing the metal–polymer interaction. The saturation of free radicals takes place in P4VP at doses higher than 25 kGy. Further, the results also indicate that the free radical creation due to irradiation is more in PS than in P4VP, as the saturation takes place at lower doses in a PS/P4VP blend as compared to P4VP and in a blend with higher PS content. X-ray diffraction studies on silver films deposited on unirradiated and irradiated, softened polystyrene substrates do not show any significant change due to irradiation.

AB - Results of the investigations carried out on the optical properties of silver nanoparticulate films deposited on the electron beam irradiated blends of polystyrene (PS) and poly(4-vinylpyridine) (P4VP) are reported. Sub-surface silver particulate films are deposited at a constant deposition rate of 0.4 nm/s on irradiated blends held at 455 K in a vacuum of 8 × 10−6 torr. The optical absorption studies indicate that the morphology of the nanoparticulate films can be tuned by electron beam irradiation of polymer blends. The change observed due to irradiation is attributed to the formation of free radicals, thereby altering the polymer–metal interaction. A shift in the plasmon resonance peak towards longer wavelengths is observed for 50 nm thick silver particulate films deposited on softened 8 MeV electron irradiated P4VP as compared to unirradiated P4VP. The shift is more in the case of P4VP than for PS, possibly due to the combined effect of free radicals produced by irradiation and the lone pair of electrons present in P4VP in enhancing the metal–polymer interaction. The saturation of free radicals takes place in P4VP at doses higher than 25 kGy. Further, the results also indicate that the free radical creation due to irradiation is more in PS than in P4VP, as the saturation takes place at lower doses in a PS/P4VP blend as compared to P4VP and in a blend with higher PS content. X-ray diffraction studies on silver films deposited on unirradiated and irradiated, softened polystyrene substrates do not show any significant change due to irradiation.

UR - http://www.scopus.com/inward/record.url?scp=84920259510&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84920259510&partnerID=8YFLogxK

U2 - 10.1007/s10854-014-2211-9

DO - 10.1007/s10854-014-2211-9

M3 - Article

VL - 25

SP - 4612

EP - 4616

JO - Journal of Materials Science: Materials in Electronics

JF - Journal of Materials Science: Materials in Electronics

SN - 0957-4522

IS - 10

ER -