Oxygen level monitoring in an oxygen cylinder

K. V. Santhosh, B. K. Roy, Pankaj Kumar Bhowmik

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

This paper aims at designing an oxygen level monitoring technique in an oxygen cylinder. The amount of oxygen present inside the oxygen cylinder is very vital information when such cylinder is in use for supply of oxygen to a critical patient. The amount of oxygen present inside the cylinder is measured by the pressure at the outlet nozzle. The pressure is measured using a high precision MEMS Pressure Sensor. The output of the MEMS pressure sensor is voltage of the order milli. An amplifier is used to amplify this milli volt signal. A microcontroller is used in cascade to process the signal and display the pressure of oxygen cylinder. Also a buzzer is given which cautions the attendants of patient whenever the level of oxygen is below a pre-decided value. The signal is further transmitted to the monitoring station through wireless communication module. Graphical display is used at monitoring station to indicate the pressure in the oxygen cylinders to initiate actions like replacement of empty cylinders with filled ones. Experimental results show that. The aims set for this paper are achieved satisfactorily.

Original languageEnglish
Title of host publicationIEEE-International Conference on Advances in Engineering, Science and Management, ICAESM-2012
Pages592-595
Number of pages4
Publication statusPublished - 2012
Externally publishedYes
Event1st International Conference on Advances in Engineering, Science and Management, ICAESM-2012 - Nagapattinam, Tamil Nadu, India
Duration: 30-03-201231-03-2012

Conference

Conference1st International Conference on Advances in Engineering, Science and Management, ICAESM-2012
CountryIndia
CityNagapattinam, Tamil Nadu
Period30-03-1231-03-12

Fingerprint

Oxygen
Monitoring
Pressure sensors
MEMS
Microcontrollers
Nozzles
Display devices
Communication
Electric potential

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

Cite this

Santhosh, K. V., Roy, B. K., & Kumar Bhowmik, P. (2012). Oxygen level monitoring in an oxygen cylinder. In IEEE-International Conference on Advances in Engineering, Science and Management, ICAESM-2012 (pp. 592-595). [6216068]
Santhosh, K. V. ; Roy, B. K. ; Kumar Bhowmik, Pankaj. / Oxygen level monitoring in an oxygen cylinder. IEEE-International Conference on Advances in Engineering, Science and Management, ICAESM-2012. 2012. pp. 592-595
@inproceedings{654aeddf42b04078b05b84c47f0c3ff0,
title = "Oxygen level monitoring in an oxygen cylinder",
abstract = "This paper aims at designing an oxygen level monitoring technique in an oxygen cylinder. The amount of oxygen present inside the oxygen cylinder is very vital information when such cylinder is in use for supply of oxygen to a critical patient. The amount of oxygen present inside the cylinder is measured by the pressure at the outlet nozzle. The pressure is measured using a high precision MEMS Pressure Sensor. The output of the MEMS pressure sensor is voltage of the order milli. An amplifier is used to amplify this milli volt signal. A microcontroller is used in cascade to process the signal and display the pressure of oxygen cylinder. Also a buzzer is given which cautions the attendants of patient whenever the level of oxygen is below a pre-decided value. The signal is further transmitted to the monitoring station through wireless communication module. Graphical display is used at monitoring station to indicate the pressure in the oxygen cylinders to initiate actions like replacement of empty cylinders with filled ones. Experimental results show that. The aims set for this paper are achieved satisfactorily.",
author = "Santhosh, {K. V.} and Roy, {B. K.} and {Kumar Bhowmik}, Pankaj",
year = "2012",
language = "English",
isbn = "9781467302135",
pages = "592--595",
booktitle = "IEEE-International Conference on Advances in Engineering, Science and Management, ICAESM-2012",

}

Santhosh, KV, Roy, BK & Kumar Bhowmik, P 2012, Oxygen level monitoring in an oxygen cylinder. in IEEE-International Conference on Advances in Engineering, Science and Management, ICAESM-2012., 6216068, pp. 592-595, 1st International Conference on Advances in Engineering, Science and Management, ICAESM-2012, Nagapattinam, Tamil Nadu, India, 30-03-12.

Oxygen level monitoring in an oxygen cylinder. / Santhosh, K. V.; Roy, B. K.; Kumar Bhowmik, Pankaj.

IEEE-International Conference on Advances in Engineering, Science and Management, ICAESM-2012. 2012. p. 592-595 6216068.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Oxygen level monitoring in an oxygen cylinder

AU - Santhosh, K. V.

AU - Roy, B. K.

AU - Kumar Bhowmik, Pankaj

PY - 2012

Y1 - 2012

N2 - This paper aims at designing an oxygen level monitoring technique in an oxygen cylinder. The amount of oxygen present inside the oxygen cylinder is very vital information when such cylinder is in use for supply of oxygen to a critical patient. The amount of oxygen present inside the cylinder is measured by the pressure at the outlet nozzle. The pressure is measured using a high precision MEMS Pressure Sensor. The output of the MEMS pressure sensor is voltage of the order milli. An amplifier is used to amplify this milli volt signal. A microcontroller is used in cascade to process the signal and display the pressure of oxygen cylinder. Also a buzzer is given which cautions the attendants of patient whenever the level of oxygen is below a pre-decided value. The signal is further transmitted to the monitoring station through wireless communication module. Graphical display is used at monitoring station to indicate the pressure in the oxygen cylinders to initiate actions like replacement of empty cylinders with filled ones. Experimental results show that. The aims set for this paper are achieved satisfactorily.

AB - This paper aims at designing an oxygen level monitoring technique in an oxygen cylinder. The amount of oxygen present inside the oxygen cylinder is very vital information when such cylinder is in use for supply of oxygen to a critical patient. The amount of oxygen present inside the cylinder is measured by the pressure at the outlet nozzle. The pressure is measured using a high precision MEMS Pressure Sensor. The output of the MEMS pressure sensor is voltage of the order milli. An amplifier is used to amplify this milli volt signal. A microcontroller is used in cascade to process the signal and display the pressure of oxygen cylinder. Also a buzzer is given which cautions the attendants of patient whenever the level of oxygen is below a pre-decided value. The signal is further transmitted to the monitoring station through wireless communication module. Graphical display is used at monitoring station to indicate the pressure in the oxygen cylinders to initiate actions like replacement of empty cylinders with filled ones. Experimental results show that. The aims set for this paper are achieved satisfactorily.

UR - http://www.scopus.com/inward/record.url?scp=84863922678&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84863922678&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84863922678

SN - 9781467302135

SP - 592

EP - 595

BT - IEEE-International Conference on Advances in Engineering, Science and Management, ICAESM-2012

ER -

Santhosh KV, Roy BK, Kumar Bhowmik P. Oxygen level monitoring in an oxygen cylinder. In IEEE-International Conference on Advances in Engineering, Science and Management, ICAESM-2012. 2012. p. 592-595. 6216068