Phenol removal in packed bed using coconut stalk as adsorbent

C. R. Girish, Swaroop M. Shajahan

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

The present paper investigates the application of coconut stalk fibre to remove phenol from wastewater in a packed column. The influence of operating conditions like flow rate (5, 10, 15 mL/min) and bed height (4, 8 and 12 cm) on the adsorption were investigated. The dynamic behavior of the packed column was studied by drawing the breakthrough curves. The experimental data were investigated by using Thomas model and BDST model. It was found that the adsorption capacity increased with increase in flow rate and bed depth. The BDST model was employed to calculate the service time required for saturation of the bed which will be used for the design of the column. The adsorption capacity was evaluated as 215.5 mg/g showing that coconut stalk is a promising adsorbent.

Original languageEnglish
Pages (from-to)319-326
Number of pages8
JournalInternational Journal of Mechanical Engineering and Technology
Volume8
Issue number11
Publication statusPublished - 01-11-2017

Fingerprint

Packed beds
Adsorbents
Phenols
Adsorption
Flow rate
Wastewater
Fibers

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Cite this

@article{cfb188924bca4410b24bc077f0c83667,
title = "Phenol removal in packed bed using coconut stalk as adsorbent",
abstract = "The present paper investigates the application of coconut stalk fibre to remove phenol from wastewater in a packed column. The influence of operating conditions like flow rate (5, 10, 15 mL/min) and bed height (4, 8 and 12 cm) on the adsorption were investigated. The dynamic behavior of the packed column was studied by drawing the breakthrough curves. The experimental data were investigated by using Thomas model and BDST model. It was found that the adsorption capacity increased with increase in flow rate and bed depth. The BDST model was employed to calculate the service time required for saturation of the bed which will be used for the design of the column. The adsorption capacity was evaluated as 215.5 mg/g showing that coconut stalk is a promising adsorbent.",
author = "Girish, {C. R.} and Shajahan, {Swaroop M.}",
year = "2017",
month = "11",
day = "1",
language = "English",
volume = "8",
pages = "319--326",
journal = "International Journal of Mechanical Engineering and Technology",
issn = "0976-6340",
publisher = "IAEME Publication",
number = "11",

}

Phenol removal in packed bed using coconut stalk as adsorbent. / Girish, C. R.; Shajahan, Swaroop M.

In: International Journal of Mechanical Engineering and Technology, Vol. 8, No. 11, 01.11.2017, p. 319-326.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Phenol removal in packed bed using coconut stalk as adsorbent

AU - Girish, C. R.

AU - Shajahan, Swaroop M.

PY - 2017/11/1

Y1 - 2017/11/1

N2 - The present paper investigates the application of coconut stalk fibre to remove phenol from wastewater in a packed column. The influence of operating conditions like flow rate (5, 10, 15 mL/min) and bed height (4, 8 and 12 cm) on the adsorption were investigated. The dynamic behavior of the packed column was studied by drawing the breakthrough curves. The experimental data were investigated by using Thomas model and BDST model. It was found that the adsorption capacity increased with increase in flow rate and bed depth. The BDST model was employed to calculate the service time required for saturation of the bed which will be used for the design of the column. The adsorption capacity was evaluated as 215.5 mg/g showing that coconut stalk is a promising adsorbent.

AB - The present paper investigates the application of coconut stalk fibre to remove phenol from wastewater in a packed column. The influence of operating conditions like flow rate (5, 10, 15 mL/min) and bed height (4, 8 and 12 cm) on the adsorption were investigated. The dynamic behavior of the packed column was studied by drawing the breakthrough curves. The experimental data were investigated by using Thomas model and BDST model. It was found that the adsorption capacity increased with increase in flow rate and bed depth. The BDST model was employed to calculate the service time required for saturation of the bed which will be used for the design of the column. The adsorption capacity was evaluated as 215.5 mg/g showing that coconut stalk is a promising adsorbent.

UR - http://www.scopus.com/inward/record.url?scp=85036566853&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85036566853&partnerID=8YFLogxK

M3 - Article

VL - 8

SP - 319

EP - 326

JO - International Journal of Mechanical Engineering and Technology

JF - International Journal of Mechanical Engineering and Technology

SN - 0976-6340

IS - 11

ER -