Spectroscopic and electrical analysis of spray deposited copper oxide thin films

Adithya Prakash, Ganesha Krishna V S, Sahana Nagappa Moger, M. G. Mahesha

Research output: Contribution to journalArticlepeer-review

Abstract

Copper Oxide (CuO) in thin film form is an excellent candidate for absorber layer in solar cells due to their adequate band gap, minimal cost, and large abundance. In this work, CuO thin films were grown on glass substrates by spray pyrolysis technique. The impact of substrate temperature and precursor concentration on the structural, morphological, optical, and electrical properties of the films were thoroughly investigated. The formation of polycrystalline tenorite phase CuO was confirmed by X-ray diffractogram. FESEM showed morphological homogeneity of the films and EDAX validated the presence of O and Cu in the samples. Spectrophotometric experiments revealed that CuO films exhibit a considerable absorption in the visible range, which gradually decreased after 800 nm. The film's estimated band gap was near to the solar absorption band gap, indicating that they can be employed as absorber layers in solar cells. The formation of tenorite phase CuO was further confirmed by Raman analysis. The optical emission properties of the CuO films were studied by photoluminescence spectroscopy. X-ray Photoelectron Spectroscopy revealed the presence of Cu2O in minor fraction along with CuO. Hall measurements were done to study the electrical properties like resistivity, mobility, and carrier density.

Original languageEnglish
Article number103926
JournalMaterials Today Communications
Volume32
DOIs
Publication statusPublished - 08-2022

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Mechanics of Materials
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Spectroscopic and electrical analysis of spray deposited copper oxide thin films'. Together they form a unique fingerprint.

Cite this