Steady state and averaged state space modellingof non-ideal boost converter

M. Arjun, Vineeth Patil

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Switched mode power converters are the most important circuits for battery powered applications such as hybrid electric vehicles, lighting systems as well as integrated circuits. These converters are usually studied in its ideal form. However, practical converters behave differently due to associated parasites and thus affect both steady state and stability. So, this paper analyses steady state and state space modelling of non-ideal boost converter. A converter is operated in both CCM and DCM modes. Models are derived by considering capacitance effects of diode and switch in addition to other parasites. The models derived are detailed and care has been taken to avoid assumptions and approximations though the models are very complex. The methodology adopted can be easily extended for other converters. Effect of every parasite and switching frequency on performance of the converter are clearly evaluated by plotting time domain and frequency domain plots in MATLAB. Simulation results show that there is a considerable deviation in performance of practical converters from its ideal case and the deviation is just not due to the inclusion of parasites but also due to the shift in operating point (duty cycle).

Original languageEnglish
Article number71204
Pages (from-to)109-133
Number of pages25
JournalInternational Journal of Power Electronics
Volume7
Issue number1-2
DOIs
Publication statusPublished - 01-01-2015
Externally publishedYes

Fingerprint

Hybrid vehicles
Power converters
Switching frequency
MATLAB
Integrated circuits
Diodes
Capacitance
Lighting
Switches
Parasites
Networks (circuits)

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

Cite this

@article{2f56a6387da74c709e9b5565789293c5,
title = "Steady state and averaged state space modellingof non-ideal boost converter",
abstract = "Switched mode power converters are the most important circuits for battery powered applications such as hybrid electric vehicles, lighting systems as well as integrated circuits. These converters are usually studied in its ideal form. However, practical converters behave differently due to associated parasites and thus affect both steady state and stability. So, this paper analyses steady state and state space modelling of non-ideal boost converter. A converter is operated in both CCM and DCM modes. Models are derived by considering capacitance effects of diode and switch in addition to other parasites. The models derived are detailed and care has been taken to avoid assumptions and approximations though the models are very complex. The methodology adopted can be easily extended for other converters. Effect of every parasite and switching frequency on performance of the converter are clearly evaluated by plotting time domain and frequency domain plots in MATLAB. Simulation results show that there is a considerable deviation in performance of practical converters from its ideal case and the deviation is just not due to the inclusion of parasites but also due to the shift in operating point (duty cycle).",
author = "M. Arjun and Vineeth Patil",
year = "2015",
month = "1",
day = "1",
doi = "10.1504/IJPELEC.2015.071204",
language = "English",
volume = "7",
pages = "109--133",
journal = "International Journal of Power Electronics",
issn = "1756-638X",
publisher = "Inderscience Publishers",
number = "1-2",

}

Steady state and averaged state space modellingof non-ideal boost converter. / Arjun, M.; Patil, Vineeth.

In: International Journal of Power Electronics, Vol. 7, No. 1-2, 71204, 01.01.2015, p. 109-133.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Steady state and averaged state space modellingof non-ideal boost converter

AU - Arjun, M.

AU - Patil, Vineeth

PY - 2015/1/1

Y1 - 2015/1/1

N2 - Switched mode power converters are the most important circuits for battery powered applications such as hybrid electric vehicles, lighting systems as well as integrated circuits. These converters are usually studied in its ideal form. However, practical converters behave differently due to associated parasites and thus affect both steady state and stability. So, this paper analyses steady state and state space modelling of non-ideal boost converter. A converter is operated in both CCM and DCM modes. Models are derived by considering capacitance effects of diode and switch in addition to other parasites. The models derived are detailed and care has been taken to avoid assumptions and approximations though the models are very complex. The methodology adopted can be easily extended for other converters. Effect of every parasite and switching frequency on performance of the converter are clearly evaluated by plotting time domain and frequency domain plots in MATLAB. Simulation results show that there is a considerable deviation in performance of practical converters from its ideal case and the deviation is just not due to the inclusion of parasites but also due to the shift in operating point (duty cycle).

AB - Switched mode power converters are the most important circuits for battery powered applications such as hybrid electric vehicles, lighting systems as well as integrated circuits. These converters are usually studied in its ideal form. However, practical converters behave differently due to associated parasites and thus affect both steady state and stability. So, this paper analyses steady state and state space modelling of non-ideal boost converter. A converter is operated in both CCM and DCM modes. Models are derived by considering capacitance effects of diode and switch in addition to other parasites. The models derived are detailed and care has been taken to avoid assumptions and approximations though the models are very complex. The methodology adopted can be easily extended for other converters. Effect of every parasite and switching frequency on performance of the converter are clearly evaluated by plotting time domain and frequency domain plots in MATLAB. Simulation results show that there is a considerable deviation in performance of practical converters from its ideal case and the deviation is just not due to the inclusion of parasites but also due to the shift in operating point (duty cycle).

UR - http://www.scopus.com/inward/record.url?scp=84952061556&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84952061556&partnerID=8YFLogxK

U2 - 10.1504/IJPELEC.2015.071204

DO - 10.1504/IJPELEC.2015.071204

M3 - Article

VL - 7

SP - 109

EP - 133

JO - International Journal of Power Electronics

JF - International Journal of Power Electronics

SN - 1756-638X

IS - 1-2

M1 - 71204

ER -