Suitability of modular aluminium formwork in rcc framed structures

V. Sreenath, B. Prakash Rao, Anup Wilfred Sebastian, K. K. Chengappa

Research output: Contribution to journalArticle

Abstract

This paper defines in brief, the need of Modular Aluminum Formwork in the Indian construction industry. The study is conducted on a project in Bangalore, Karnataka, India namely Salarpuria Sattva Divinity which comprises of a commercial (2B+G+5) and ten residential towers (G+21). The paper analyses the suitability of Modular Aluminium Formwork technology in a framed structure by considering the quality, speed of construction, labor requirement, cost of construction and other related factors. The same typical floor plan was also prepared in a complete Mivan design, for comparison. The estimation of cost for one floor of all the three structures using these three different formworks were prepared. The construction using Mivan technology seemed to be the most economical in the long run considering the number of repetitions possible with the formwork. The Modular Aluminium formwork construction was found to be as expensive as that of using conventional formwork for the RCC framed structure, considering only the initial costs (Maintenance and finishing costs are not considered). But the quality obtained with the use of Modular Aluminium formwork, the stability due to monolithic construction, the increased carpet area and the speed of construction makes the technology more economic than the conventional technology. The list of advantages and limitations of using the method was also prepared.

Original languageEnglish
Pages (from-to)421-426
Number of pages6
JournalInternational Journal of Civil Engineering and Technology
Volume9
Issue number6
Publication statusPublished - 01-06-2018

Fingerprint

Aluminum
Costs
Construction industry
Towers
Personnel
Economics

All Science Journal Classification (ASJC) codes

  • Control and Systems Engineering
  • Civil and Structural Engineering
  • Building and Construction
  • Computer Networks and Communications

Cite this

Sreenath, V., Prakash Rao, B., Sebastian, A. W., & Chengappa, K. K. (2018). Suitability of modular aluminium formwork in rcc framed structures. International Journal of Civil Engineering and Technology, 9(6), 421-426.
Sreenath, V. ; Prakash Rao, B. ; Sebastian, Anup Wilfred ; Chengappa, K. K. / Suitability of modular aluminium formwork in rcc framed structures. In: International Journal of Civil Engineering and Technology. 2018 ; Vol. 9, No. 6. pp. 421-426.
@article{b896bb440c2d49baa8db5339b3116d29,
title = "Suitability of modular aluminium formwork in rcc framed structures",
abstract = "This paper defines in brief, the need of Modular Aluminum Formwork in the Indian construction industry. The study is conducted on a project in Bangalore, Karnataka, India namely Salarpuria Sattva Divinity which comprises of a commercial (2B+G+5) and ten residential towers (G+21). The paper analyses the suitability of Modular Aluminium Formwork technology in a framed structure by considering the quality, speed of construction, labor requirement, cost of construction and other related factors. The same typical floor plan was also prepared in a complete Mivan design, for comparison. The estimation of cost for one floor of all the three structures using these three different formworks were prepared. The construction using Mivan technology seemed to be the most economical in the long run considering the number of repetitions possible with the formwork. The Modular Aluminium formwork construction was found to be as expensive as that of using conventional formwork for the RCC framed structure, considering only the initial costs (Maintenance and finishing costs are not considered). But the quality obtained with the use of Modular Aluminium formwork, the stability due to monolithic construction, the increased carpet area and the speed of construction makes the technology more economic than the conventional technology. The list of advantages and limitations of using the method was also prepared.",
author = "V. Sreenath and {Prakash Rao}, B. and Sebastian, {Anup Wilfred} and Chengappa, {K. K.}",
year = "2018",
month = "6",
day = "1",
language = "English",
volume = "9",
pages = "421--426",
journal = "International Journal of Civil Engineering and Technology",
issn = "0976-6308",
publisher = "IAEME Publication",
number = "6",

}

Sreenath, V, Prakash Rao, B, Sebastian, AW & Chengappa, KK 2018, 'Suitability of modular aluminium formwork in rcc framed structures', International Journal of Civil Engineering and Technology, vol. 9, no. 6, pp. 421-426.

Suitability of modular aluminium formwork in rcc framed structures. / Sreenath, V.; Prakash Rao, B.; Sebastian, Anup Wilfred; Chengappa, K. K.

In: International Journal of Civil Engineering and Technology, Vol. 9, No. 6, 01.06.2018, p. 421-426.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Suitability of modular aluminium formwork in rcc framed structures

AU - Sreenath, V.

AU - Prakash Rao, B.

AU - Sebastian, Anup Wilfred

AU - Chengappa, K. K.

PY - 2018/6/1

Y1 - 2018/6/1

N2 - This paper defines in brief, the need of Modular Aluminum Formwork in the Indian construction industry. The study is conducted on a project in Bangalore, Karnataka, India namely Salarpuria Sattva Divinity which comprises of a commercial (2B+G+5) and ten residential towers (G+21). The paper analyses the suitability of Modular Aluminium Formwork technology in a framed structure by considering the quality, speed of construction, labor requirement, cost of construction and other related factors. The same typical floor plan was also prepared in a complete Mivan design, for comparison. The estimation of cost for one floor of all the three structures using these three different formworks were prepared. The construction using Mivan technology seemed to be the most economical in the long run considering the number of repetitions possible with the formwork. The Modular Aluminium formwork construction was found to be as expensive as that of using conventional formwork for the RCC framed structure, considering only the initial costs (Maintenance and finishing costs are not considered). But the quality obtained with the use of Modular Aluminium formwork, the stability due to monolithic construction, the increased carpet area and the speed of construction makes the technology more economic than the conventional technology. The list of advantages and limitations of using the method was also prepared.

AB - This paper defines in brief, the need of Modular Aluminum Formwork in the Indian construction industry. The study is conducted on a project in Bangalore, Karnataka, India namely Salarpuria Sattva Divinity which comprises of a commercial (2B+G+5) and ten residential towers (G+21). The paper analyses the suitability of Modular Aluminium Formwork technology in a framed structure by considering the quality, speed of construction, labor requirement, cost of construction and other related factors. The same typical floor plan was also prepared in a complete Mivan design, for comparison. The estimation of cost for one floor of all the three structures using these three different formworks were prepared. The construction using Mivan technology seemed to be the most economical in the long run considering the number of repetitions possible with the formwork. The Modular Aluminium formwork construction was found to be as expensive as that of using conventional formwork for the RCC framed structure, considering only the initial costs (Maintenance and finishing costs are not considered). But the quality obtained with the use of Modular Aluminium formwork, the stability due to monolithic construction, the increased carpet area and the speed of construction makes the technology more economic than the conventional technology. The list of advantages and limitations of using the method was also prepared.

UR - http://www.scopus.com/inward/record.url?scp=85049234898&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85049234898&partnerID=8YFLogxK

M3 - Article

VL - 9

SP - 421

EP - 426

JO - International Journal of Civil Engineering and Technology

JF - International Journal of Civil Engineering and Technology

SN - 0976-6308

IS - 6

ER -

Sreenath V, Prakash Rao B, Sebastian AW, Chengappa KK. Suitability of modular aluminium formwork in rcc framed structures. International Journal of Civil Engineering and Technology. 2018 Jun 1;9(6):421-426.