Synthesis of model predictive controller for an identified model of MIMO process

P. Chenchu Saibabu, Hitesh Sai, Saksham Yadav, C. R. Srinivasan

Research output: Contribution to journalArticle

Abstract

Model Predictive Controller (MPC) technology has been researched and developed to meet varied demands of need to control industrial power plants and petroleum refineries. This development has paved the way for the MPC technology too many other fields like automotive, aerospace, food processing industries in this paper, primary importance has been paid to the development of a MPC for an identified model of Multiple Input and Multiple Output process. In this paper, a Four Tank System has been considered for generation of input-output data. This data i.e. generated input output data is used for the estimation of two polynomial model, name ARX model (Autoregressive exogenous) model and OE (Output Error) model. With each of model output generated, the Fit-Rates of models are compared to find out most efficient model. The model equations are now considered as plant for developing a Model Predictive Controller (MPC). Two sets of results are obtained after the development of MPC and tested. One is without noise and one is with noise. Both sets of results were a success as the output signals traces step input signals after some steady oscillations in real time with in a very short period of time which indicated a good response time. The MPC developed can be applied to any polynomial model with a good Fit-Rate, it predicts and control the process variables automatically.

Original languageEnglish
Pages (from-to)950-956
Number of pages7
JournalIndonesian Journal of Electrical Engineering and Computer Science
Volume17
Issue number2
DOIs
Publication statusPublished - 01-02-2020

Fingerprint

MIMO systems
Multiple-input multiple-output (MIMO)
Synthesis
Controller
Controllers
Output
Model
Polynomial Model
Error Model
Petroleum
Petroleum refineries
Power Plant
Food processing
Autoregressive Model
Period of time
Response Time
Trace
Industry
Power plants
Oscillation

All Science Journal Classification (ASJC) codes

  • Signal Processing
  • Information Systems
  • Hardware and Architecture
  • Computer Networks and Communications
  • Control and Optimization
  • Electrical and Electronic Engineering

Cite this

@article{7eb4196440034b14a061cc266c667142,
title = "Synthesis of model predictive controller for an identified model of MIMO process",
abstract = "Model Predictive Controller (MPC) technology has been researched and developed to meet varied demands of need to control industrial power plants and petroleum refineries. This development has paved the way for the MPC technology too many other fields like automotive, aerospace, food processing industries in this paper, primary importance has been paid to the development of a MPC for an identified model of Multiple Input and Multiple Output process. In this paper, a Four Tank System has been considered for generation of input-output data. This data i.e. generated input output data is used for the estimation of two polynomial model, name ARX model (Autoregressive exogenous) model and OE (Output Error) model. With each of model output generated, the Fit-Rates of models are compared to find out most efficient model. The model equations are now considered as plant for developing a Model Predictive Controller (MPC). Two sets of results are obtained after the development of MPC and tested. One is without noise and one is with noise. Both sets of results were a success as the output signals traces step input signals after some steady oscillations in real time with in a very short period of time which indicated a good response time. The MPC developed can be applied to any polynomial model with a good Fit-Rate, it predicts and control the process variables automatically.",
author = "{Chenchu Saibabu}, P. and Hitesh Sai and Saksham Yadav and Srinivasan, {C. R.}",
year = "2020",
month = "2",
day = "1",
doi = "10.11591/ijeecs.v17.i2.pp941-949",
language = "English",
volume = "17",
pages = "950--956",
journal = "Indonesian Journal of Electrical Engineering and Computer Science",
issn = "2502-4752",
publisher = "Institute of Advanced Engineering and Science (IAES)",
number = "2",

}

Synthesis of model predictive controller for an identified model of MIMO process. / Chenchu Saibabu, P.; Sai, Hitesh; Yadav, Saksham; Srinivasan, C. R.

In: Indonesian Journal of Electrical Engineering and Computer Science, Vol. 17, No. 2, 01.02.2020, p. 950-956.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Synthesis of model predictive controller for an identified model of MIMO process

AU - Chenchu Saibabu, P.

AU - Sai, Hitesh

AU - Yadav, Saksham

AU - Srinivasan, C. R.

PY - 2020/2/1

Y1 - 2020/2/1

N2 - Model Predictive Controller (MPC) technology has been researched and developed to meet varied demands of need to control industrial power plants and petroleum refineries. This development has paved the way for the MPC technology too many other fields like automotive, aerospace, food processing industries in this paper, primary importance has been paid to the development of a MPC for an identified model of Multiple Input and Multiple Output process. In this paper, a Four Tank System has been considered for generation of input-output data. This data i.e. generated input output data is used for the estimation of two polynomial model, name ARX model (Autoregressive exogenous) model and OE (Output Error) model. With each of model output generated, the Fit-Rates of models are compared to find out most efficient model. The model equations are now considered as plant for developing a Model Predictive Controller (MPC). Two sets of results are obtained after the development of MPC and tested. One is without noise and one is with noise. Both sets of results were a success as the output signals traces step input signals after some steady oscillations in real time with in a very short period of time which indicated a good response time. The MPC developed can be applied to any polynomial model with a good Fit-Rate, it predicts and control the process variables automatically.

AB - Model Predictive Controller (MPC) technology has been researched and developed to meet varied demands of need to control industrial power plants and petroleum refineries. This development has paved the way for the MPC technology too many other fields like automotive, aerospace, food processing industries in this paper, primary importance has been paid to the development of a MPC for an identified model of Multiple Input and Multiple Output process. In this paper, a Four Tank System has been considered for generation of input-output data. This data i.e. generated input output data is used for the estimation of two polynomial model, name ARX model (Autoregressive exogenous) model and OE (Output Error) model. With each of model output generated, the Fit-Rates of models are compared to find out most efficient model. The model equations are now considered as plant for developing a Model Predictive Controller (MPC). Two sets of results are obtained after the development of MPC and tested. One is without noise and one is with noise. Both sets of results were a success as the output signals traces step input signals after some steady oscillations in real time with in a very short period of time which indicated a good response time. The MPC developed can be applied to any polynomial model with a good Fit-Rate, it predicts and control the process variables automatically.

UR - http://www.scopus.com/inward/record.url?scp=85072059719&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85072059719&partnerID=8YFLogxK

U2 - 10.11591/ijeecs.v17.i2.pp941-949

DO - 10.11591/ijeecs.v17.i2.pp941-949

M3 - Article

VL - 17

SP - 950

EP - 956

JO - Indonesian Journal of Electrical Engineering and Computer Science

JF - Indonesian Journal of Electrical Engineering and Computer Science

SN - 2502-4752

IS - 2

ER -