The effect of machining parameters on drilling induced delamination of carbon fiber reinforced polymer composite

S. Divakara Shetty, Apurv Rajat, Geet Shetty, Prathamesh Patil

Research output: Contribution to journalArticle

Abstract

Delamination is one of the most common defects occur during drilling of carbon fiber reinforced polymer composites. It is an inter-ply failure phenomenon and it has to be minimized to have better quality of drilled holes for structural applications. The current study is conducted to investigate the effect of machining parameters (spindle speed, drill diameter, feed rate and point angle) on delamination while drilling of 60-40 weight % and 55-45 weight % of bi-directional carbon fiber reinforced polymer (BD CFRP) composites with titanium nitride (TiN) coated solid carbide drills. Taguchi L27 orthogonal array is used for determining the experimental results of delamination and the Taguchi methodology is also employed for determining the predicted results of delamination of both BD CFRP composite laminates. The investigation reveals that there is a good concurrence between the experimental and the predicted results of delamination. The main effect plot shows that the drill diameter has a significant effect on delamination as compared to the effect of spindle speed and feed rate. The point angle has an insignificant influence on delamination in drilling of BD CFRP composites. It is evident from the investigation that 45 weight % of resin content of BD CFRP composite gives lesser delamination as compared to the composite containing 40% of resin. Hence, 45-55 weight % of BD CFRP composite laminate can be a better choice for structural applications in industries.

Original languageEnglish
Pages (from-to)8286-8293
Number of pages8
JournalInternational Journal of Applied Engineering Research
Volume12
Issue number19
Publication statusPublished - 01-01-2017
Externally publishedYes

Fingerprint

Delamination
Carbon fibers
Drilling
Machining
Composite materials
Polymers
Laminates
Resins
Titanium nitride
Carbides
Defects
Industry

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Divakara Shetty, S. ; Rajat, Apurv ; Shetty, Geet ; Patil, Prathamesh. / The effect of machining parameters on drilling induced delamination of carbon fiber reinforced polymer composite. In: International Journal of Applied Engineering Research. 2017 ; Vol. 12, No. 19. pp. 8286-8293.
@article{b262826ec1e54c77958ba518e035f999,
title = "The effect of machining parameters on drilling induced delamination of carbon fiber reinforced polymer composite",
abstract = "Delamination is one of the most common defects occur during drilling of carbon fiber reinforced polymer composites. It is an inter-ply failure phenomenon and it has to be minimized to have better quality of drilled holes for structural applications. The current study is conducted to investigate the effect of machining parameters (spindle speed, drill diameter, feed rate and point angle) on delamination while drilling of 60-40 weight {\%} and 55-45 weight {\%} of bi-directional carbon fiber reinforced polymer (BD CFRP) composites with titanium nitride (TiN) coated solid carbide drills. Taguchi L27 orthogonal array is used for determining the experimental results of delamination and the Taguchi methodology is also employed for determining the predicted results of delamination of both BD CFRP composite laminates. The investigation reveals that there is a good concurrence between the experimental and the predicted results of delamination. The main effect plot shows that the drill diameter has a significant effect on delamination as compared to the effect of spindle speed and feed rate. The point angle has an insignificant influence on delamination in drilling of BD CFRP composites. It is evident from the investigation that 45 weight {\%} of resin content of BD CFRP composite gives lesser delamination as compared to the composite containing 40{\%} of resin. Hence, 45-55 weight {\%} of BD CFRP composite laminate can be a better choice for structural applications in industries.",
author = "{Divakara Shetty}, S. and Apurv Rajat and Geet Shetty and Prathamesh Patil",
year = "2017",
month = "1",
day = "1",
language = "English",
volume = "12",
pages = "8286--8293",
journal = "International Journal of Applied Engineering Research",
issn = "0973-4562",
publisher = "Research India Publications",
number = "19",

}

The effect of machining parameters on drilling induced delamination of carbon fiber reinforced polymer composite. / Divakara Shetty, S.; Rajat, Apurv; Shetty, Geet; Patil, Prathamesh.

In: International Journal of Applied Engineering Research, Vol. 12, No. 19, 01.01.2017, p. 8286-8293.

Research output: Contribution to journalArticle

TY - JOUR

T1 - The effect of machining parameters on drilling induced delamination of carbon fiber reinforced polymer composite

AU - Divakara Shetty, S.

AU - Rajat, Apurv

AU - Shetty, Geet

AU - Patil, Prathamesh

PY - 2017/1/1

Y1 - 2017/1/1

N2 - Delamination is one of the most common defects occur during drilling of carbon fiber reinforced polymer composites. It is an inter-ply failure phenomenon and it has to be minimized to have better quality of drilled holes for structural applications. The current study is conducted to investigate the effect of machining parameters (spindle speed, drill diameter, feed rate and point angle) on delamination while drilling of 60-40 weight % and 55-45 weight % of bi-directional carbon fiber reinforced polymer (BD CFRP) composites with titanium nitride (TiN) coated solid carbide drills. Taguchi L27 orthogonal array is used for determining the experimental results of delamination and the Taguchi methodology is also employed for determining the predicted results of delamination of both BD CFRP composite laminates. The investigation reveals that there is a good concurrence between the experimental and the predicted results of delamination. The main effect plot shows that the drill diameter has a significant effect on delamination as compared to the effect of spindle speed and feed rate. The point angle has an insignificant influence on delamination in drilling of BD CFRP composites. It is evident from the investigation that 45 weight % of resin content of BD CFRP composite gives lesser delamination as compared to the composite containing 40% of resin. Hence, 45-55 weight % of BD CFRP composite laminate can be a better choice for structural applications in industries.

AB - Delamination is one of the most common defects occur during drilling of carbon fiber reinforced polymer composites. It is an inter-ply failure phenomenon and it has to be minimized to have better quality of drilled holes for structural applications. The current study is conducted to investigate the effect of machining parameters (spindle speed, drill diameter, feed rate and point angle) on delamination while drilling of 60-40 weight % and 55-45 weight % of bi-directional carbon fiber reinforced polymer (BD CFRP) composites with titanium nitride (TiN) coated solid carbide drills. Taguchi L27 orthogonal array is used for determining the experimental results of delamination and the Taguchi methodology is also employed for determining the predicted results of delamination of both BD CFRP composite laminates. The investigation reveals that there is a good concurrence between the experimental and the predicted results of delamination. The main effect plot shows that the drill diameter has a significant effect on delamination as compared to the effect of spindle speed and feed rate. The point angle has an insignificant influence on delamination in drilling of BD CFRP composites. It is evident from the investigation that 45 weight % of resin content of BD CFRP composite gives lesser delamination as compared to the composite containing 40% of resin. Hence, 45-55 weight % of BD CFRP composite laminate can be a better choice for structural applications in industries.

UR - http://www.scopus.com/inward/record.url?scp=85040223918&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85040223918&partnerID=8YFLogxK

M3 - Article

VL - 12

SP - 8286

EP - 8293

JO - International Journal of Applied Engineering Research

JF - International Journal of Applied Engineering Research

SN - 0973-4562

IS - 19

ER -